Tioga Sealed BB Trouble

[Gashead]

Need some help fella's !

I opted for a Tioga Sealed BB this time but having trouble getting the nut on that secure's the spider onto the crank !

The nut side obviously needs to sit against the spider as the other side sits onto the bearings - the only trouble I cant get it tight as no tool will fit between the nut and the spider ! I have even used a Tioga spanner and that is too thick in diameter - Any idea's 


Nick

[Gashead]

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=009-4.jpg


http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=010-4.jpg


http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=011-3.jpg

[QUADROPHENIA]

isnt it missing a spacer / washer behind it ?

[QUADROPHENIA]

 sure that aint the other side also ? get a photo up of the complete set

[QUADROPHENIA]

i think "special" nick strikes again 

[Gashead]

 

Its not a feckin burner !

More pics on the way - no spacer as far as I can see - and no it's not the wrong sided adujusting nut as the internal threads are different sizes !


Where the feck and I goin wrong - its doin my ed in 

[Gary72]

I had the same problem with the same kit, bought a spanner from Decathlon and ADJUSTED the thinkness on the grindwheel at work, if you are near Dagenham race track tommorow I will have it with me.

[Gashead]

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=013-3.jpg


http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=014-3.jpg




 

[Gary72]

Also it's not a completly sealed set, use a hose carefully when washing, as when I stripped mine there was signs of dirt and muck in it.

[Gashead]

See Pete - it's not me after all - needs a proper tool !!!!!!!!!!!!!!!!

































Thats not an invite for spanner jokes lads !

[MartyC]

it's not me after all - needs a proper tool !!!!!!!!!!!!!!!!

Hey, Pete knows all about tools, he always his tool in his hand 

[stidds]

Thats not an invite for spanner jokes lads !

Nick I think YOU are the only spanner here mate 

[Gary72]

Hope these are clear enough, like I said if your having trouble I could make one and send it, or I will take it with me to Creation on the novice night.

[Gashead]

Cheers gary that would be spot on !

I went down my mates at the bike shop and his spanner was a tad thick too !!

If you could do one for me that would be great - I got half a dozen of these bb's so it would be a waste not to use them !


Let me know what I owe ya fella

Nick 

[Gary72]

Will let you know, will get a spanner on thursday night on my way to Skaterham and post on Saturday, PM me your adress

[Gashead]

 


Top man Gary -

[pickle]

it doesn't matter anyway Nick, i didn't think you tightened anything up anyway 

[Gary72]

Nick, now have spanner waiting to be sent, please PM your adress, once it's posted I will let you know the cost the spanner was £8.95, cant see postage costing more than a quid.
Never noticed before but the spanner is made from 4130 Chromo

[jT Racing]

didn't you buy one off me? i thought you tightened it up prior to fitting and i have never needed a dodgey spanner so far.