skyway trick pegs help

[bazzark]

hi  good eve.   what size pegs to get, my lad has a skyway streetbeat with skyway tuff ii. he needs some rear pegs im not
 sure what size to buy is see 10mm 14mm 26tpi and 24tpi . any help be great.


with thanks

b

[Tefore]

24tpi are for all tuff wheels but 26tpi are for all other wheels inc skyway coaster brake. also depends what year the tuffs are , are they new or older tuffs? if they are genuine older tuffs then 10mm they should be. but skyway did have some funny axle sizes.

[adeshere]

There used to be one size for tuffs and another for non-tuffs  BUT  the latest set of tuffs i got had the tuff size on the rear  24tpi(coaster brake ones)  and the one on the front is a 26tpi

Check the nuts, they might be stamped with the size.

[ColoredTuffs.com]

Generally most Skyway Tuff Wheels use a 3/8" (10mm) axle with 26tpi on the front wheel, and 24tpi on the rear wheel.
 I hope that helps ya!
-Ed

[JT71]

Generally most Skyway Tuff Wheels use a 3/8" (10mm) axle with 26tpi on the front wheel, and 24tpi on the rear wheel.
 I hope that helps ya!
-Ed

I also found this to be true.

So you need to get 24tpi 3/8" (10mm) pegs for the rear.

the rears as far as I know are ALWAYS 24tpi 3/8" but the fronts can vary, but most you will see are 26tpi.

and I think Suntour might have had 28tpi threads, and then made 26tpi coloured axle nuts...most confusing.

[bazzark]

hi all thank you for your quick answers. ordered some of handy bikes{ebay}  job done one happy 12 year old. i must take some piccys and post them up here. hes practicing so hard at tricks i am amazed what he can do. had hes bike since dec. can do full endos
bar spins tail whips. framestands. 360 s.and few others i dont know what there called. lol  so gonna keep pushing him he wants to be a pro. due to a local lad he seen who rides for  fedral bmx . ooh wish i could do that stuff on my falcon pro.. lol

thanks radbmxers.