gfxgfx
 
logo
 
gfx gfx
gfx
975808 Posts in 138943 Topics by 6370 Members - Latest Member: Robertflamn November 26, 2024, 12:24 PM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Greasing up
gfx
gfxgfx
 

Author Topic: Greasing up  (Read 553 times)

0 Members and 1 Guest are viewing this topic.

dannywhiteley

  • Guest
Greasing up
« on: February 16, 2008, 09:05 AM »
When you build a show/display bike, do you bother with greasing up the BB and headset?  Seems like a lot of unecessary mess to me if it aint going to be ridden.

Also a silly question (but im still a novice).  Which way do the ball races sit in the BB?  Do the bearings rotate against the BB cup or the crank?

subversion

  • Guest
Re: Greasing up
« Reply #1 on: February 16, 2008, 01:06 PM »
If you take a loose ball bearing race in the cage & place it flat side down on the table like this:



then put the BB cup over it, covering it - that is the correct fitment :daumenhoch:

Same for headsets too...

The bearings rotate against both the Cups & the Crank races.

Offline MartyC

  • Berm Worm
  • ***********
  • Posts: 8755
  • Radder than a Rad thing on a Rad day; maybe?
  • Rated:
Re: Greasing up
« Reply #2 on: February 16, 2008, 07:37 PM »
I usually grease them up but maybe that's just me  :-\


Better to crash and burn than fade away

Offline Dark Diggler

  • Berm Worm
  • ***********
  • Posts: 12607
  • Rated:
Re: Greasing up
« Reply #3 on: February 16, 2008, 10:04 PM »
Grease it, even if it aint ridden, that way, when you missus pisses/pours something on it when you are not in, it wont rust the moving parts  :daumenhoch:
Whats the matter Kid, don't ya like clowns? Don't we make you laugh? Aint we fukkin funny?

scooby74

  • Guest
Re: Greasing up
« Reply #4 on: February 16, 2008, 11:07 PM »
grease it up and ride it  :daumenhoch:

dannywhiteley

  • Guest
Re: Greasing up
« Reply #5 on: February 17, 2008, 09:54 AM »
Cheers for the info, I had the ball races in correctly, just checking :daumenhoch:

And I will grease up afterall, I need to swap the cranks so will do it then.  Not going to be ridden far, but it will protect the parts for if it is ever ridden.

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Greasing up
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal