gfxgfx
 
logo
 
gfx gfx
gfx
975806 Posts in 138943 Topics by 6363 Members - Latest Member: V6 DOW November 25, 2024, 09:56 AM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Torker 280X, Round or oval cut outs?
gfx
gfxgfx
 

Author Topic: Torker 280X, Round or oval cut outs?  (Read 9227 times)

0 Members and 1 Guest are viewing this topic.

madmohican

  • Guest
Torker 280X, Round or oval cut outs?
« on: January 27, 2008, 12:36 PM »
Ok, The TORKER 280X has been one of my favourite bikes since the early 80's and i was lucky enough to get one off the bay last year. Since buying mine i've looked at several on bmx museum's and i've seen TORKER 280X's on them with ROUND and OVAL cut outs in the gusset. Does the 280X have ROUND or OVAL cut outs? Mine has the OVAL ones with 280X decals, is it a 280 or 280X? Thanks, Lee

dj_benice

  • Guest
Re: Torker 280X, Round or oval cut outs?
« Reply #1 on: January 27, 2008, 12:45 PM »
earlier ones had the round gussets as did the MX later ones had the oval gusset as far as 280/280x goes I think they where the same frame just diff spec parts, if I am wrong I am sure one of the porker experts will correct me ;)  Nice to meet you last night lee, did you get home safe with the mad ginger one ???

Offline Bob_Acid

  • Team Admin
  • BMX Overlord
  • *
  • Posts: 17364
  • It's Bronked
  • Rated:
Re: Torker 280X, Round or oval cut outs?
« Reply #2 on: January 27, 2008, 01:34 PM »
CM's difference in the top tube length between them. Think the oval cut out came in in 83

skids

  • Guest
Re: Torker 280X, Round or oval cut outs?
« Reply #3 on: January 28, 2008, 09:04 AM »
I had an 84 spec 280x [1" longer top tube than the 280] it had the oval gusset cutout.
that style ran for a couple of years, I think.
on a foot note.... it was put out as a direct rival to the diamondback silver streak.
most of the parts were SR i.e: stem,cranks,hubs,etc......panaracer tyres[1.75 rear-massive2.25 rear!]
 I hope this helps.........Skids

FuNMoNsTeR

  • Guest
Re: Torker 280X, Round or oval cut outs?
« Reply #4 on: January 28, 2008, 01:37 PM »
I am not too hot on pre 83 Torkers... i think they were called Flytes and Max Flytes.... they had round hole gusset plates and came with a Torker thunderbolt logo on the downtubes and the old Red 'Torker inside a tyre' badge on the headtube
The 280 series started in 83 i believe and had oval gusset plates.... The 280X was available as a frame and fork or complete bike.... It has an 19 inch toptube(centre to centre)
 The Torker 280 was only available as a complete bike and marketed to compete with sales of the Silver Streak initially as the part specs were virtually identical on the stock bikes. The 280 is a rare beastie and has 18 inch toptube centre to centre. 1984 saw the release of the Pro X.... Torker did away with the gusset plate and put a brace under the downtube at the headstock like the Haro Gen 1s(which Torker made). I think the Pro X is 19 inches centre to centre. Thanks to Retrogeezer who initially provided me with some of this info  :daumenhoch:   Hope it helps  ;)
« Last Edit: January 30, 2008, 08:48 PM by FuNMoNsTeR »

Offline crazycraig

  • BMX Nerd
  • *********
  • Posts: 4628
  • Rated:
Re: Torker 280X, Round or oval cut outs?
« Reply #5 on: January 28, 2008, 01:41 PM »
God knows but i like um





and restoring at the min

Old School BMX only
Cash is King
Your not famous because you have a BMX so dont expect me to lick your arse for bits !!! I will leave that to the sheep
Jim'll fix it did loads for charity

Offline Gary72

  • Site Supporter
  • BMX Nerd
  • *
  • Posts: 4218
  • Rated:
Re: Torker 280X, Round or oval cut outs?
« Reply #6 on: January 28, 2008, 01:49 PM »
As a kid I had a Torker Magnum 200 which i belive to be the smaller brother to the 280/280x that had a round hole.
If anyone comes across one with an IG11 postcode stamped in it, I would like it back as it was stolen.

FuNMoNsTeR

  • Guest
Re: Torker 280X, Round or oval cut outs?
« Reply #7 on: January 28, 2008, 01:53 PM »
Be rude not too  :D   Here is my 83 Torker 280...Bastardised to my own sick taste  ;D


sanderson

  • Guest
Re: Torker 280X, Round or oval cut outs?
« Reply #8 on: January 28, 2008, 03:45 PM »
my first flying machine torker 280 with round hole christmas 83 i think
the oval ones came out later

sold it to dylan clayton,he won a few nationals on it i think at about 8 or 9 years old
 :Great_Britain:

Offline Bob_Acid

  • Team Admin
  • BMX Overlord
  • *
  • Posts: 17364
  • It's Bronked
  • Rated:
Re: Torker 280X, Round or oval cut outs?
« Reply #9 on: January 28, 2008, 05:20 PM »
Fun they deffo did a 280x with the round gusset, my mate had one.

madmohican

  • Guest
Re: Torker 280X, Round or oval cut outs?
« Reply #10 on: January 28, 2008, 06:05 PM »
earlier ones had the round gussets as did the MX later ones had the oval gusset as far as 280/280x goes I think they where the same frame just diff spec parts, if I am wrong I am sure one of the porker experts will correct me ;)  Nice to meet you last night lee, did you get home safe with the mad ginger one ???
[/quote

Good meeting you too. Got home fine thanks, CRAZYADE had a blast. Thanks for the info on my bik

Offline meticulous

  • Berm Worm
  • ***********
  • Posts: 9509
  • Rated:
Re: Torker 280X, Round or oval cut outs?
« Reply #11 on: January 29, 2008, 07:46 PM »
according to alan at alans bmx, they changed to oval gusset  because they cracked on the round gusset.
R.I.P  O.M. Far short of the finish line...

Offline Gary72

  • Site Supporter
  • BMX Nerd
  • *
  • Posts: 4218
  • Rated:
Re: Torker 280X, Round or oval cut outs?
« Reply #12 on: January 29, 2008, 10:53 PM »
Have this lot awaiting my frame to come back from a work mate who is painting it for me, had it since May 2007 :2gunsfiring_v1: :2gunsfiring_v1: :2gunsfiring_v1: :2gunsfiring_v1:
Funmonsters old Pro X







Took these tonight to send to him as GUESS WHATS MISSING reminder >:(

Flaz

  • Guest
Re: Torker 280X, Round or oval cut outs?
« Reply #13 on: January 29, 2008, 11:18 PM »
they did the 280x with both shaped gussets oval was later it replaced the round gussets as they kept snapping

Offline Bob_Acid

  • Team Admin
  • BMX Overlord
  • *
  • Posts: 17364
  • It's Bronked
  • Rated:
Re: Torker 280X, Round or oval cut outs?
« Reply #14 on: January 30, 2008, 04:35 AM »
Aye that's exactly what happened to my mates one and it was replaced with the oval one  :daumenhoch:

FuNMoNsTeR

  • Guest
Re: Torker 280X, Round or oval cut outs?
« Reply #15 on: January 30, 2008, 03:21 PM »
Here is the Thrash test of the 280X from 1983.....






An advert from 1982/83 showing the round hole 280




The hardest Torker parts to source are Torker Hubs and the Torker Pro T bars... It took me 2 years to get a set of bars. Here they are with my Candy Blue Torker 280X.

 

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Torker 280X, Round or oval cut outs?
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal