Author Topic: Little warning! (Read 957 times)

FAZE3 · « **on:** January 20, 2008, 06:14 PM »

Back in the day I was forever injurying myself on my bike. Now a days injuries are unheard of.......until today

Whilst stripping this frame back with ol nitromorse, a bloody great bit flicked up and hit me in the eye

Believe me in can alf sting

So be careful out there kids, you never know what life might through up $:-\$

bigtimerob · « **Reply #1 on:** January 20, 2008, 06:23 PM »

should have gone to spec savers !!!

crazycraig · « **Reply #2 on:** January 20, 2008, 06:27 PM »

munners · « **Reply #3 on:** January 20, 2008, 06:28 PM »

Bad news mate.

I was rubbing a frame down the other day with wire wool. Like a mug i blew away the filings off the frame and got a load in my left eye. Went down the hospital and got it cleaned out. Only took 20 mins but 3hrs waiting to be seen!

You should get it seen to mate. Have you ever left nitromorse on your hands! It burns like fook so i dont think optrex would do the job!

CD17 · « **Reply #4 on:** January 20, 2008, 06:36 PM »

Nick, I used to rub the frames down with wire wool but Dan told me not to, as little bits of wire stick to the frame & then when he paints or powders you get little lumps in the finish

Talk to Dan

FAZE3 · « **Reply #5 on:** January 20, 2008, 06:50 PM »

An eye full of metal filing's that sounds even worse

So whats the best way to prep the frame for its new super paint coat then?

CD17 · « **Reply #6 on:** January 20, 2008, 07:46 PM »

I think he said wet & dry or emery cloth $:-\$

steve Beech TA · « **Reply #7 on:** January 25, 2008, 09:30 PM »

I THINK THE BEST WAY TO GET THE FRAME PREP DONE IS TO GET SOME OTHER F----- to do it

selfpreservation · « **Reply #8 on:** January 26, 2008, 12:25 AM »

you should always wear goggles and gloves and long slieves when working with haz chemicals keep skin covered up your lucky it wasnt caustic soda ,do yourself a favour , read the instructions if your not familiar with the chemical