Author Topic: BOTY 2007 - Entries (Read 99882 times)

DIRTBIKER250F · « **Reply #100 on:** December 19, 2007, 04:45 PM »

Finally Matt, we get to see the Floval

and tis very nice

Paul

diesel · « **Reply #101 on:** December 19, 2007, 05:06 PM »

Kappa PK20 retro

Parts List:
f&f - Kappa PK20
Wheels - Koxx
Cranks - Profile Racing 180mm
Pedals - Shimano DX
Bars - TNT Retro
Stem - DK
Grips - dmr
Seat - SDG Bel air
Seatpost - X lite
Seatclamp - Profile

WARDY · « **Reply #102 on:** December 19, 2007, 05:21 PM »

Ya seen the rat version , now how about the fooking doing it version

1982 loopy ripper (mint as fook)
unstamped landing gear (again maf)
nos nyko black headset with tange lock nut
nos black dk stem.
mint as fook se power wings
nos tech 4 levers on mint as fook mx 1000s(with center mech)
new redline flight cranks (stripped and repowdered white)
nos suginio spider , bolts and chainwheel
mint as fook shimano dx s
nos kashimax super
and last but not least nos skyway alloy hubbed tuff 2 s
oh and repro pads

stidds · « **Reply #103 on:** December 19, 2007, 05:38 PM »

Bren, it looks as though something has taken a sh*t on your Landing Gear forks

I like it a lot, it looks as though it should be on an ASBO.....

Nicfred · « **Reply #104 on:** December 19, 2007, 06:27 PM »

i wasn't gonna enter,cos it not 100% how i'd like it,but wot the hell,let's just do it

original(not repo)looptail early 80's quadangle

picture below without the frame pad,i think it looks better?

heres a quick list of the bits and bobs,all parts are nos
80's looptail quadangle with unstamped landing gear
acs z rims and hubs
dia compe mx 1000 brakes,cables and levers
se wing bars(early un knurled)
odi mushroom grips
suntour stem(got a tuff neck but not got round to fitting,and its not new,so might sell it)
elina lightening bolt seat
dia compe mx seat clamp
redline single pinch full wrap crank
redline early bubble type chain ring
hutch pedals and cages
sorry the pictures are s**t,but if it does anygood ill get it off the wall and get some proper ones done,(and even put the bars at a nice angle for em,they wont go any higher on the wall cos they hit the roof) hope ya all like it

kowalski · « **Reply #105 on:** December 19, 2007, 07:17 PM »

my first and favourite build of 07 my 1983 redline pl20, parts list in museum if you wanna know whats under the hood and please don't let the red lever put you off it is now black

Gashead · « **Reply #106 on:** December 19, 2007, 07:35 PM »

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=GottaloveaCurtis002.jpg

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=GottaloveaCurtis009.jpg

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=GottaloveaCurtis008.jpg

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=GottaloveaCurtis007.jpg

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=GottaloveaCurtis006.jpg

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=GottaloveaCurtis010.jpg

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=GottaloveaCurtis011.jpg

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=GottaloveaCurtis012.jpg

http://s58.photobucket.com/albums/g243/gashead69/?action=view&current=GottaloveaCurtis039.jpg

My Lil Curtis Expert

Curtis Frame Forks & Special Bars ans Seat Post, Araya's, Dia Compe MX900's, DK Mini, Ame, Comp 3's, Sugino, KKT

Nick

bmxmatt1974 · « **Reply #107 on:** December 19, 2007, 07:53 PM »

i'm liking the black burner

oldboyburner · « **Reply #108 on:** December 19, 2007, 08:39 PM »

my custom aero pro

custom painted tange frame and forks
polished mx 1000 calipers
polished dc levers
polished suntour stem
chrome custom m pedals
raleigh branded kashimax seat
tange 125 ano silver head set
custom painted araya wheels
renthol seat post
comp 3s fat and thin
tange grips

thebigdog · « **Reply #109 on:** December 19, 2007, 08:44 PM »

nos(still has warranty card attached) '84 quadangle frame and forks,with se quad pad.
mint black alloy hubbed tuff II's,with tioga comp st freestyle tyres
nos black elina flyte tech seat,cromo straight seat post.
nos black suntour seatpost clamp.
refurbished & polished tuf neck stem.
84 GT freestyle bars,with nos black ame tris and haro tech plate.
mint black dia-compe mx1000's with tech 3 levers and d/c cables.
tioga o/p crank with white power disc and black tuf-neck chain ring.

just waiting for my black and chrome chain to turn up .
would like to get some better pics outside but its to cold

thanks to crazycraig,poolysherif,orgasmdonor,JTsmooth,waxintaxin,jonfoz, and dirtbiker250f......i think thats about it.
oh and wardy for being a shmuck!!

few outside pics now

eloopnai · « **Reply #110 on:** December 19, 2007, 10:09 PM »

heres my first build that im gonna use rather than be a showbike
1981 chatsworth nikel mongoose
got some mongoose bars , mx seat clamp and pad to come to finish it off

nos mongoose bb
mongoose 165 crank
mongoose snowflake
sr custom pedals
nos aero seat
nos odyssey post
nos 901s
nos suntour seat clamp
nos tyres
new skyway tuffs
nos pads
nos plate
nos izumi chain
nos hatta headset
nos shimano freewheel
nos suntour stem
nos win bars
nos ame grips

animal · « **Reply #111 on:** December 19, 2007, 10:19 PM »

NOS MRD Expert

This bike Is a very close replica of by bike BITD.

NOS MRD Expert F&F.
Haro Vector Bars Rechromed With New Decals.
NOS dia Compe MX1000 & Tech III Lever With Sharp Lever Grip.
NOS Clarks Power Glide Cable.
NOS ODI Mushroom Grips.
NOS Tange LP125 Headset.
Minty Alloy Hubbed Skyways.
NOS Mitsuboshi Silver Star Grippa Tyres Both 1.175's.
Minty MKS Graphite Pedals.
Minty CW Chromo Cranks With Original Decals.
Nos Pro Neck Chain Ring.
Izumi Chrome Chain.
Tuf Neck seatpost.
Nos Dia Compe Seatpost Clamp.
Nos Cycle Pro Shotgun II Seat.
Tuf Neck Flex Fighter.

NYSoul · « **Reply #112 on:** December 19, 2007, 10:32 PM »

1987 GT Pro Freestyle Tour Team Model

Frame, forks and post all powdered by Dan

Dyno Bars (NOS)
Mallet Stem (Re - Powdered)
Power Series Cranks - Mirror polished and then wet flatted with P800 to put the satin finish back
GT Pedals (NOS)
Araya 48s laced to GT Mohawk Hubs
Tioga Pool Tyres
ACS Locking levers (NOS)
White Gyro (NOS)
White Izumi (NOS)
Bleached White GT Seat
Nippon Front Brake (NOS)
AD990 Rear (NOS)
Peregrine Seat Clamp (NOS)

etriedes · « **Reply #113 on:** December 19, 2007, 10:44 PM »

GT Nora Cup .. I never found any pedals in time, so here it is as it stands .. ( excuse the shitty pics )

GT 83 F&F Orig chrome
GT Pro Bars XL - nos
GT Seatpost - nos
GT Pads
Tuff Neck Stem - chrome
Dia Compe MX Seat clamp - nos
Dia-Compe 900's - nos
Dia-Compe Tech 4 lever - nos
Ame Grips - nos
Flite Donuts - nos
Redline 401 single pinch Crank
Redline Sprocket
Pro - Class Rims - stripped & polished
Suzue sealed hubs - nos
Comp III skinwall Tyres 1.75 rear & 2.125 front

BossHogg · « **Reply #114 on:** December 19, 2007, 10:50 PM »

83 CW Phaze 1

Photo's could have been better

Specs:
83 CW Phase 1 F/F
NOS Tange LP125 Headset
DK Pro Square Stem
CW Pro Moustache Bars
NOS Ame Dual Grips
CW Seatpost
NOS Elina Lightning Bolt Seat
NOS DK Round Seatclamp
NOS Bullseye 178mm Crank and B/B
NOS Bullseye Chainwheel
Suntour XC-11 Pedals
NOS ACS Z Rims
NOS Bullseye Hubs
GBH 186mm S/S Spokes
Prolite 16mm Red Alu Nips
NOS Shimano DX Freewheel
DC MX 1000 Brakes with Tech 3 levers
NOS ACS Z Pads
NOS Tioga Comp 3 20x1.75
NOS Yaban Chain

dwain dibbly · « **Reply #115 on:** December 19, 2007, 11:08 PM »

is it me or has the standard of builds
gone through the roof this year

i think we could easily stand toe to toe with the best the yanks have to offer

FANTASTIC JOB TO EVERYONE INVOLVED

snav69 · « **Reply #116 on:** December 19, 2007, 11:14 PM »

Quote from: dwain dibbly on December 19, 2007, 11:08 PM

is it me or has the standard of builds
gone through the roof this year

i think we could easily stand toe to toe with the best the yanks have to offer

FANTASTIC JOB TO EVERYONE INVOLVED

Hell Yeah

jimmyp · « **Reply #117 on:** December 19, 2007, 11:33 PM »

1985 Raleigh Team Aero Pro Andy Ruffell Replica

Always been a massive fan of Andy Ruffell since i was about 8 years old and was gutted when he left Mongoose to go to Raleigh. Would not believe he had changed teams till my m8 showed me the front of the 1985 Raleigh Broucher. I took the broucher home with me and used to look through it for hours wanting to have a bike just like Ruffs. So 20 years on the dream has finally been realised and ive made the bike up as close to the broucher photo spec as i could find. Hope you dudes like, cheers

After speaking to Craig Schofield at the burner bash 2007 he told me that the Raleigh rider's bikes ran with GT Pro bars, ESP Stem and different chainwheel which i have now bought and fitted to the bike. Have also got a new Raleigh sticker on the number plate, one that is not see through. Its is now as close as possible to Andys Raleigh 85 broucher bike as i can possibly get. Thanks dudes hope you like

Frame & Fork: 1985 Tange Raleigh Team Aero Pro
Bars: GT Pro Bars
Stem: ESP
Head Set: Tange 125lp Black Alloy
Cranks: Single Pinch Redline 401 Flight Cranks
Chainring: Pro Neck USA
Pedals: Hutch Bear Traps
Brakes: White MX1000 Front and Rear
Levers: White Tech 3s
Grips: Ami
Seat: Viscount Aero
Seat Post: Renthal
Seatpost Clamp: Suntour Blue
Chain: Chrome
Freewheel: Shimano 16t
Rims: Polished Pro Class
Hubs: Suzue Sealed
Tires: Tioga Comp III
Plate: Yellow Haro Flo

JESSIEJAMES · « **Reply #118 on:** December 20, 2007, 03:03 AM »

Hutch Judge F/F Powder Over Chrome
Studd Adjustable stem
Parker Hubs
Chrome Araya Rims
Hutch Grips
Aerospeed Cranks
Phil Spider
Studd Quick Chain Chainwheel
Hutch Flite Pads
Kashimax seat
Hutch Pro Bars
Tange mx 125 Lp
Custom Back Halved Pro Racer Stand

frdavid · « **Reply #119 on:** December 20, 2007, 05:40 AM »

would it be better with this picture Jessie

skywayta · « **Reply #120 on:** December 20, 2007, 07:24 AM »

My 83 Mongoose Californian

Soz for pinchin the piccy, I own the bike just don't have it yet

Jt · « **Reply #121 on:** December 20, 2007, 11:10 AM »

the burner boys are rocking it this year!!

nice work fellas

pic1london · « **Reply #122 on:** December 20, 2007, 11:47 AM »

Easy all...

WOW, there's some fantastic builds already in.The standards are hitting the rafters already. Good work to 1 & all..

Can I enter the arena now??

2002 Alliant Pro 24 anodised bronze
Radix Copper anal intruder forks
Profile 177 copper 3pc with Ti spindle
Stolen 33 ring/13 rear sprocket
Crupi Pro pedals with Ti spindles
JP alli nuts & tensioners
Crupi sealed flip flop hubs
T H E runflat rims
Brooklands seat with copper rails
V2 clamp on stem
Hope sealed headset & bar ends
Radix copper cruiser bars

Trying to raise the fully custom bar so we can stand firm against our yanky friends..

UK representing..
Big up your hairy chests fella's.
Lets 'av it.