RIM HELP

[insideoutland]

JUST PICKED THESE UP  SER2 SER3 PRO CLASS  , JUST WANTED TO KNOW IF THE SER3 CAN BE CLEANED UP TO MATCH  SER2 ,
I.E OVEN CLANER WET&DRY   ANY HELP WILL BE    CHEERS PHIL

[MartyC]

The dark rim is a hard anodised rim, not sure if it can be stripped in the same way, maybe Login_user or Atari_Ager can help as they are both Mongoose men 

[login_user]

Pm sent  Mate, it can be stripped but it,will be harder then normal. 

[etriedes]

Caustic Soda, Thick Rubber Gloves, Mask, Eye Protection, and well ventilated area will do it 

[insideoutland]

AND AFTER THE C SODA  WILL THEY BE GOOD FOR A GOOD BUFF WITH SOME AUTO SOL??

[sawzall]

i did these which were hard anno pc3s, i stripped the anno using caustic which took ages to do,i just kept checking them to make sure they had'nt dissapeared then mirror polished them

[insideoutland]

they look spot on dude did you do the polish your self ?what best to use???

[sawzall]

yes mate i used a bench polishing mop,i use three stage polishing,from cource cutting compound,then medium and finish off with fine,they take a long time to do because of all the holes and you have to be careful not to loose any of the definition of the spoke holes etc

[insideoutland]

cheers