Author Topic: PK freshly anodised # NEW PICS ADDED Pg1 # (Read 3050 times)

generallee · « **on:** November 13, 2007, 02:02 PM »

My holy grail has always been the early 90's anodised purple pk ripper... and ive now acheived it with a little help...
Here is a sneakpeak of my latest project... paul lawson at Custom Colour Anodising did this for me... he wasnt keen on doing frames, but I begged him and told him not to worry if it didnt come out perfect.. and good on him, he did an amazing job. Paul now says after doing this one he would do others too... just make sure you hand him your aluminium frame already HIGHLY poslihed.. as thats the way to get results... I took off the tatty decals and spent hours polishing with peek and autosol etc...
so - here it is before..

and heres a sneak peak of after....

I have everything to build this, apart from time... but im working on it!

now heres the full frame with the headtube sticker on...

and now all decalled up and ready to go! The frame looks brande new. The dropouts were mnt anyway, but this is without doubt the nicest frame ive ever resto'd!

wildwood1971 · « **Reply #1 on:** November 13, 2007, 02:14 PM »

wow that looks stunning was it expensive

brass monkey! · « **Reply #2 on:** November 13, 2007, 02:15 PM »

steve that looks a mental colour mate,

how much is annodising compared to Powder

lets see some more

Frosty · « **Reply #3 on:** November 13, 2007, 02:16 PM »

Nice colour Steve, can't you take it to the jungle and get it built there

generallee · « **Reply #4 on:** November 13, 2007, 02:19 PM »

£50 for the anodising job fellas... amazing value for money. Theres postage both ways on top of that and of course the polishing etc... but worth every penny - it arrives with me today - this photo is what paul took before he sent it!
Will post up more pics when Ive got it!

brass monkey! · « **Reply #5 on:** November 13, 2007, 02:26 PM »

Quote from: generallee on November 13, 2007, 02:19 PM

£50 for the anodising job fellas... amazing value for money. Theres postage both ways on top of that and of course the polishing etc... but worth every penny - it arrives with me today - this photo is what paul took before he sent it!
Will post up more pics when Ive got it!

was that for the frame only or also the forks

snav69 · « **Reply #6 on:** November 13, 2007, 02:28 PM »

WOW thats gonna look awesome Steve

Now be a good chap and get it built

Bob_Acid · « **Reply #7 on:** November 13, 2007, 02:42 PM »

Very nice, look foward to the finished article

motomagII · « **Reply #8 on:** November 13, 2007, 02:43 PM »

i need stuff annodising but no where near does it who is he etc details please.and how long did it take to get done greg

generallee · « **Reply #9 on:** November 13, 2007, 03:14 PM »

frame only dudes. Im not in the jungle this year - This Morning decided not to send anyone out there this year.

Frosty · « **Reply #10 on:** November 13, 2007, 03:25 PM »

Steve, that is a good price for the job, I have a nice Race Inc that I was thinking of getting done in candy blue, but maybe an anno job would be a better idea. Did you need to visit to select the colour or did you do it over phone/email?

Cheers

paul

munners · « **Reply #11 on:** November 13, 2007, 03:35 PM »

Wow!

brass monkey! · « **Reply #12 on:** November 13, 2007, 03:46 PM »

Quote from: Frosty on November 13, 2007, 03:25 PM

Steve, that is a good price for the job, I have a nice Race Inc that I was thinking of getting done in candy blue, but maybe an anno job would be a better idea. Did you need to visit to select the colour or did you do it over phone/email?

Cheers

paul

Paul,
LMK if your sending anything up there as I may be able to do a double on the couriers - may save a bit ?? I think we're both in Essex ?
ta
Matt

kdw712 · « **Reply #13 on:** November 13, 2007, 04:22 PM »

that anno colour is amazing

no more sneaky peeks ?

Steve P · « **Reply #14 on:** November 13, 2007, 05:58 PM »

WoW ... that looks amazing Steve

Can they do other colours too ?

Steve

kcmobmx · « **Reply #15 on:** November 13, 2007, 06:16 PM »

sweet! I just had a Floval done in candy purple. I went the powder route but your anno looks much brighter and nicer. about the same cost... I was expecting mine to be brighter but it ended up dark. mad props dude!

here is mine:

Moose · « **Reply #16 on:** November 13, 2007, 06:26 PM »

I could have sworn I posted on here saying that it looked top banana $:-\$

Anyway - it does look minty

se bikes · « **Reply #17 on:** November 13, 2007, 06:33 PM »

as fook that is

generallee · « **Reply #18 on:** November 13, 2007, 06:51 PM »

The purple colour is their stock prple anodiseing colour - its perfect and just like the early SE colour they did in the 90's. Check out www.customcolouranodising for a look at their colours, its a basic website but you get the idea of what the colours are like. They can do gold, blue, red, orange, green, clearcoat, purple, etc etc
It takes them a little while to do as they squeeze it in between their industrial mega jobs, but the wait is worth it. I also just got back a pair of alloy Ukai rims that the polished for me - they now look like chrome. Amazing.
Check the thread in the Tech and Restoration Stickies, im sure theres something about custom colour inthere.
cheers!

Olliecw · « **Reply #19 on:** November 13, 2007, 07:05 PM »

Now that looks so nice mate

Can't wait to see it built up

Will it be at the rad bash?

?

Ollie

downhill3375 · « **Reply #20 on:** November 13, 2007, 07:14 PM »

that looks the nuts mate

i took my loopy ripper to be done a few months ago in baby blue but they had loads of trouble with it so sadly it has had to be polished again , but they did some mitey lite forks ,my proneck stem and an mx100 and lever all in black and they are bang on top guys at customcolour