Author Topic: "21+ toptube O/S frame? (Read 13071 times)

darkersomeday · « **on:** September 30, 2007, 10:47 AM »

at the risk of getting lynched!

did anyone make a frame in the 80's with a "21 or over top tube please?

"1 headtube and no brake lugs?

cheers,

RATTY · « **Reply #1 on:** September 30, 2007, 10:49 AM »

Redline PL20 I think was the first popular 21" TT frame

ron burgundy · « **Reply #2 on:** September 30, 2007, 11:12 AM »

I read somewhere, that Mongoose made a 21" frame for one of it's factory riders late 70s, early 80s. Also, SE made an over long Quad for racing downhill...

darkersomeday · « **Reply #3 on:** September 30, 2007, 12:10 PM »

cheers, i'll have a butchers at those,

was there anything longer?

only one i can remember was the robinson am-track but cant find a tt length,

rory · « **Reply #4 on:** September 30, 2007, 12:15 PM »

amtrac pro xl 21.5 tt

Bigplinky · « **Reply #5 on:** September 30, 2007, 01:06 PM »

Freeagent Limo 21" TT and a nice ride

darkersomeday · « **Reply #6 on:** September 30, 2007, 01:08 PM »

Quote from: rory on September 30, 2007, 12:15 PM

amtrac pro xl 21.5 tt

she sounds like my baby right there

are these sought after? i.e expensive?

where would i start looking?

cheers for the advice dudes!

b45t4rd · « **Reply #7 on:** September 30, 2007, 01:11 PM »

Craig Reynolds liked em long

http://bmxmuseum.com/bikes/reynolds/4382

ron burgundy · « **Reply #8 on:** September 30, 2007, 01:41 PM »

Cyclecraft, ELF, TNT all made longish frames too

Zippy · « **Reply #9 on:** September 30, 2007, 02:18 PM »

Quote from: darkersomeday on September 30, 2007, 01:08 PM

Quote from: rory on September 30, 2007, 12:15 PM
amtrac pro xl 21.5 tt

she sounds like my baby right there

are these sought after? i.e expensive?

where would i start looking?

cheers for the advice dudes!

There's only one of these in the UK at the moment and that's just been sold by me.

They're a very nice good quality frame.

mightymini · « **Reply #10 on:** September 30, 2007, 03:22 PM »

Quote from: Bigplinky on September 30, 2007, 01:06 PM

Freeagent Limo 21" TT and a nice ride

2nd that, great geometry to.

beard1973 · « **Reply #11 on:** September 30, 2007, 03:44 PM »

Quote from: Zippy on September 30, 2007, 02:18 PM

Quote from: darkersomeday on September 30, 2007, 01:08 PM
Quote from: rory on September 30, 2007, 12:15 PM
amtrac pro xl 21.5 tt

she sounds like my baby right there

are these sought after? i.e expensive?

where would i start looking?

cheers for the advice dudes!

There's only one of these in the UK at the moment and that's just been sold by me.

They're a very nice good quality frame.

And its gonna look awesome when I have finished with it... then I am gonna race the bugger...

beard1973 · « **Reply #12 on:** September 30, 2007, 03:54 PM »

Here she is before she arrived...

be ready in a couple of weeks....

kdw712 · « **Reply #13 on:** September 30, 2007, 04:01 PM »

Quote from: Bigplinky on September 30, 2007, 01:06 PM

Freeagent Limo 21" TT and a nice ride

as andy says free agent

apparently they were among the first to push the TT out

i have a 1987 pro long (early limo, has no cross brace on the rear chain stays by the BB)
its 21" TT

centre to centre when i first got it

darkersomeday · « **Reply #14 on:** September 30, 2007, 04:43 PM »

they all look about long enough for me to ride!

there was a way long haro on the bay recently too, i should have bagged that,

i want a frame i can properly ride without worrying about breaking something nice

could you have a custom O/S spec/geometry frame built and it still be O/S legal?

or would that be pushing it a little?

billstup · « **Reply #15 on:** September 30, 2007, 04:57 PM »

Are you thinking of having a few os races then Joe ?

Dingobmxer · « **Reply #16 on:** September 30, 2007, 05:01 PM »

Quote from: darkersomeday on September 30, 2007, 04:43 PM

they all look about long enough for me to ride!

there was a way long haro on the bay recently too, i should have bagged that,

i want a frame i can properly ride without worrying about breaking something nice

could you have a custom O/S spec/geometry frame built and it still be O/S legal?

or would that be pushing it a little?

no ringer's allowed Joe but also look out for the "PK Ripper XL" frames 21" TT and with a DK XXL stem, long enough to race

Have a spin on mine at Mansfield if you like?

DINGO

beard1973 · « **Reply #17 on:** September 30, 2007, 06:53 PM »

Am I gonna be allowed to race my 25th Ann Team Aero Pro at Mansfield? or am I gonna have build soemthing else?

darkersomeday · « **Reply #18 on:** September 30, 2007, 06:58 PM »

Quote from: billstup on September 30, 2007, 04:57 PM

Are you thinking of having a few os races then Joe ?

i'm starting to see the fun side of it dude

might have a go next year

fair enough dingo

i'll forget about the ringer, any excuse for another custom s&m eh?

love the idea of another ripper though,
would it have to be a non pitbull mount version?

Zippy · « **Reply #19 on:** September 30, 2007, 07:00 PM »

I'm sure as a one off your going to be fine. Mind you they may kick up a stink if you beat them again.

beard1973 · « **Reply #20 on:** September 30, 2007, 07:12 PM »

Quote from: Zippy on September 30, 2007, 07:00 PM

I'm sure as a one off your going to be fine. Mind you they may kick up a stink if you beat them again.

Can't see me doing that again...

be trying my best though.... Robinson won't be ready by 14th but if they are gonna be 'really' strict then I could throw something together with some spare parts.... But I'd sooner race my 25th TAP..