Author Topic: Crank help needed... (Read 1262 times)

scary_leary · « **on:** November 11, 2005, 09:58 PM »

the hole in my sprocket is way bigger than the crank..is this normal?
if not what do i do?

cheers
Lee

CD17 · « **Reply #1 on:** November 11, 2005, 10:06 PM »

You will need to get a reducer, Think I might have one spare if you need one, is the spindle 19mm.

Rombloke · « **Reply #2 on:** November 11, 2005, 10:10 PM »

bloody hell scary...are you that old school....

and what about a full pic of that hoff

Dave

scary_leary · « **Reply #3 on:** November 11, 2005, 10:16 PM »

yes Dave im that old school...

pics soon (not finished yet)

t/a the spindle is 18mm will your spacer do?

CD17 · « **Reply #4 on:** November 11, 2005, 10:19 PM »

18mm you sure, what cranks are they ?
I'll have a look to see if I can find it, if they are 18mm it will be a bit big, but should be ok.

scary_leary · « **Reply #5 on:** November 11, 2005, 10:39 PM »

yep they are 18mm
the cranks are GT..same as below

Rombloke · « **Reply #6 on:** November 12, 2005, 12:21 PM »

thats 19mm then im sure....i think its industry standrd size....could be wrong tho....although if i am i will delete this post so it dont matter

Dave