Author Topic: REMOVING POWDER PAINT... PLZ HELP (Read 934 times)

adenough · « **on:** July 12, 2007, 05:05 PM »

HOW THE FOOK CAN I STRIP MY FRAME OF POWDER ?

theRuler · « **Reply #1 on:** July 12, 2007, 05:16 PM »

get it blasted mate

beadblast or something like that.
sand might be a bit vicious, if the person doing it aint careful

adenough · « **Reply #2 on:** July 12, 2007, 05:18 PM »

HI MATE, THEM PPL IN STAFFORD RECKON THEY CANT GET IT OFF, VERY ANNOYED WITH THEM, IF THEY GIVE ME THE GUN N HOPPER ID DO IT MYSELF,

SteveG · « **Reply #3 on:** July 12, 2007, 05:19 PM »

Might be a case of getting it dipped somewhere. Had my kart chassis re done a while back and they told me if it didn't blast off it would have to be sent somewhere to be stripped. Must be something like nitromors bit the full strength industrial version.

adenough · « **Reply #4 on:** July 12, 2007, 05:21 PM »

ID LOVE SOME OF THAT, BUT DONT SELL IT TO THE ARABS,,LOL

theRuler · « **Reply #5 on:** July 12, 2007, 05:22 PM »

Quote from: adenough on July 12, 2007, 05:18 PM

HI MATE, THEM PPL IN STAFFORD RECKON THEY CANT GET IT OFF, VERY ANNOYED WITH THEM, IF THEY GIVE ME THE GUN N HOPPER ID DO IT MYSELF,

what were they blasting it with?

feathers?

adenough · « **Reply #6 on:** July 12, 2007, 05:25 PM »

APPARENTLY THEY TOLD ME SHOT BLAST WILL WARP THE FRAME, IM NOT CONVINCED, THEY SUGGESTED BURNING IT OFF WITH A BLOW TORCH, MMMM

theRuler · « **Reply #7 on:** July 12, 2007, 05:26 PM »

that could work!
i guess.

nitromors will soften it, but it's heavy going. try a bit of that!

MartyC · « **Reply #8 on:** July 12, 2007, 05:27 PM »

Talk to SuperbikeDan, he's the main man for powder coating - application and removal

gjs · « **Reply #9 on:** July 12, 2007, 06:21 PM »

Some places put the frame in the powder oven for a while first,then blast it a few times

adenough · « **Reply #10 on:** July 12, 2007, 06:41 PM »

seriosly thinkin bout covering in petrol and setting it alite for a bit? what you think?

rustyoldveteran · « **Reply #11 on:** July 12, 2007, 08:58 PM »

Leave it grey,and get it built!

mivvi · « **Reply #12 on:** July 12, 2007, 09:25 PM »

My local powder coaters told me they can strip it but putting it back in the oven at a higher temp? Im not sure though? $:-\$

adenough · « **Reply #13 on:** July 12, 2007, 10:15 PM »

im gonna fire it

rustyoldveteran · « **Reply #14 on:** July 12, 2007, 10:21 PM »

Dont do it dude

adenough · « **Reply #15 on:** July 12, 2007, 10:36 PM »

why not?

Frosty · « **Reply #16 on:** July 13, 2007, 10:00 AM »

do what I did with this f+f, it had very poor white powder on it

but Superbikedan dipped it for me so that I could punt it off to be re-chromed!!

brass monkey! · « **Reply #17 on:** July 13, 2007, 10:06 AM »

Quote from: MartyC on July 12, 2007, 05:27 PM

Talk to SuperbikeDan, he's the main man for powder coating - application and removal

agreed, don't risk it ! talk to Dan - he's a top bloke and know his stuff !

adenough · « **Reply #18 on:** July 13, 2007, 07:21 PM »

WENT FOR THE BLOW LAMP ( 9.99 FROM WILKOS) AND SOME NITROMORES, JUST DONE THE FORKS, TOOK BOUT AN HOUR, TAKE A PEEK

theRuler · « **Reply #19 on:** July 13, 2007, 07:25 PM »

cushty

Author Topic: REMOVING POWDER PAINT... PLZ HELP (Read 934 times)

theRuler

theRuler

theRuler

gjs

rustyoldveteran

rustyoldveteran

Frosty

theRuler