Author Topic: cleaning spokes (Read 562 times)

adenough · « **on:** June 22, 2007, 11:05 PM »

hi, any advice on the best way to get spokes clean on a pre built wheeh( araya 7c silver) cheers fog.

se-bmxer · « **Reply #1 on:** June 23, 2007, 09:50 AM »

You need a lot of time

I use autosol for the spokes and toothbrush for the place near the hubs, remove the freewheel if you can, to clean behind for a top job

login_user · « **Reply #2 on:** June 23, 2007, 12:46 PM »

I used one of those green brillo pads to get the rust and dirt off,then the Autosol for a nice shine.

aerostylie · « **Reply #3 on:** June 23, 2007, 01:00 PM »

Agreed Autosol, and I used a white dishcloth, the stringy type

Takes a lot of time and finger effort, especially if you have 48 spokes per wheel

At first you may think sod this, it's taking too long but it is well worth it

Took me about 2 days and I let my misses help out as well...result

Paul

adenough · « **Reply #4 on:** June 23, 2007, 07:44 PM »

CHEERS, AUTOSOL PLUS THE MISSES PLUS ME WATCHING, SOUNDS GOOD, THANKS.