Author Topic: help - removing B/B bearing cups (Read 680 times)

wildwood1971 · « **on:** June 06, 2007, 06:21 PM »

can anyone help please - im having a nightmare removeing some bearing cups from a aero pro 25th ani frame - anyone got any good tips please? Paul

harris · « **Reply #1 on:** June 06, 2007, 06:26 PM »

use a flat punch and drive it out from inside to out.hitting it at 12 ,3 ,6 and 9 0clock until it pops out.

just to give you an idea ,do the same for 1pc cups

TwoBobRob · « **Reply #2 on:** June 06, 2007, 06:26 PM »

Bang on. Do what Harris says

danny silverstreak · « **Reply #3 on:** June 06, 2007, 06:27 PM »

fook me dan - thats almost 24 hours
hitting it at 12 ,3 ,6 and 9 0clock until it pops out.

wildwood1971 · « **Reply #4 on:** June 06, 2007, 06:29 PM »

sorry i wasnt very clear its the actually metalparts that are in the frame not the bearings themselves but thx for ya help

harris · « **Reply #5 on:** June 06, 2007, 06:29 PM »

same thing bang them out the same.

primoman · « **Reply #6 on:** June 06, 2007, 07:08 PM »

why dont you get a thin/slim chisel and tap it out , it worked for my builds in the past leaving not a mark unless you go mad!!!or put something in the bearing cup hole (if you know wat i mean

) and pull it out??i dont know if it will help or not but just sharing my knowledge.good luck

wildwood1971 · « **Reply #7 on:** June 06, 2007, 10:43 PM »

thx for ya help guys - i'll give it a good twating with a hammer 2moro - wish me luck

Author Topic: help - removing B/B bearing cups (Read 680 times)

wildwood1971

help - removing B/B bearing cups

harris

Re: help - removing B/B bearing cups

TwoBobRob

Re: help - removing B/B bearing cups

danny silverstreak

Re: help - removing B/B bearing cups

wildwood1971

Re: help - removing B/B bearing cups

harris

Re: help - removing B/B bearing cups

primoman

Re: help - removing B/B bearing cups

wildwood1971

Re: help - removing B/B bearing cups