Author Topic: S&M Neal Wood finished (Read 2273 times)

Dingobmxer · « **on:** May 14, 2007, 06:34 PM »

I have been riding this for the last couple of weeks with a mix of parts from my parts bin but finally got round to putting the bits I really wanted on it

Just waiting for my Challenger stem to come back from the anodisers now to raise the bars a little bit.

Nicked Darkersomeday's idea for this shot (sorry Joe

)

Bike in action (thanks Andy for this shot

)

Hope you like?

DINGO

harris · « **Reply #1 on:** May 14, 2007, 06:36 PM »

looks mean

zed4130 · « **Reply #2 on:** May 14, 2007, 06:36 PM »

my dream bike ,very nice dingo

Flaz · « **Reply #3 on:** May 14, 2007, 06:38 PM »

like it ??

i fooking loves it

baldbmxer · « **Reply #4 on:** May 14, 2007, 06:39 PM »

It sure does look good matey. Just as I'd expect from one of your builds.

Bet mines faster though!!!!!

se · « **Reply #5 on:** May 14, 2007, 07:44 PM »

Little beast isn't it?

And you have put me to shame, must takes the bikes out of that pokey garden for some better pix. Although my pots are coming along lovely with that hot April.

Dingobmxer · « **Reply #6 on:** May 14, 2007, 08:05 PM »

Oh and I forgot to add I am waiting for S&M bars to arrive too, dont want Darkersomeday on my case

DINGO

alfie · « **Reply #7 on:** May 14, 2007, 08:19 PM »

its got to be a first , dingo posts some pictures and not a quad to be seen !

SaMAlex · « **Reply #8 on:** May 14, 2007, 08:28 PM »

That looks way nice, propper clean and simple.

I was just saying to someone today, if I had my way, all my bikes would have all black parts and painted frames (not always, but usually black). There is still a bit of chrome and silver on there that could do with coming off (bars, seatclamp and chainring). I hope the new bars are black.

Really nice build. Cant wait to see it for real, maybe even take it for a spin?

Dingobmxer · « **Reply #9 on:** May 14, 2007, 08:34 PM »

Thanks for the comments guys

Alex, I have a black S&M XLT seat clamp here and the bars are black too, I want an S&M littleman sprocket in 36t in black before I put them on though, wheels will remain chrome

Alfie, I do love my Quads but I needed a bike I can just chuck in my van and take to work with me (to go riding straight after) and not worry about.

DINGO

SaMAlex · « **Reply #10 on:** May 14, 2007, 08:44 PM »

Black bars, seat clamp and chainring and that bike will be kicking it! Sure, chrome rims. That goes without saying.

Are you OK to get an S&M sprocket? Ive no idea if they are easy to get hold of. Let me know if you need any help with it.

Alex

Dingobmxer · « **Reply #11 on:** May 14, 2007, 08:46 PM »

I need all the help I can get Alex

Just looked around but £45 is the cheapest I have seen

DINGO

Flying_fox · « **Reply #12 on:** May 14, 2007, 08:48 PM »

You've built another beauty there Dingo.

Is that Jay Kennings old f&f?? If so I've had some good battles against that bike.

Dingobmxer · « **Reply #13 on:** May 14, 2007, 08:50 PM »

Quote from: Flying_fox on May 14, 2007, 08:48 PM

You've built another beauty there Dingo.

Is that Jay Kennings old f&f?? If so I've had some good battles against that bike.

Thanks Foxy, its not JK's frame, this one came from the US

DINGO

SaMAlex · « **Reply #14 on:** May 14, 2007, 08:54 PM »

Quote from: dingobmxer on May 14, 2007, 08:46 PM

I need all the help I can get Alex
Just looked around but £45 is the cheapest I have seen
DINGO

Hmmm. thinking about it, I think I have got a black 36 t S&M sprocket, but not a little man one. You are welcome to have that one, and I will see if I can get you the one you want. I'll let you know tomorrow

Dingobmxer · « **Reply #15 on:** May 14, 2007, 08:59 PM »

If it doesnt have a guard on it Alex that one would be fine, I just wanna keep it all as S&M as possible

DINGO

SaMAlex · « **Reply #16 on:** May 14, 2007, 09:01 PM »

its got a bolt on guard. I'll go dig it out now.

Dingobmxer · « **Reply #17 on:** May 14, 2007, 09:07 PM »

Parts rundown:-
Frame, S&M Neal Wood
Fork,S&M Race
Headset,Campag internal (with Fly cnc cover)
Stem,S&M Redneck LT
Bars,TNT Retro (to be swapped for S&M Race)
Grips,S&M lock on with Envy bar ends
Lever,Shimano XT
Brake,Shimano XT
Cable,Odyssey linear
Seat,Selle Italia
Post,Odyssey Intac
Clamp,Profile slim Jim (to be swapped for S&M XLT)
Crank/BB Profile Race 180mm with titanium spindle
Chainring,Profile Imperial 36t (to be swapped with S&M one)
Pedals,Easton Flatboy
Wheels, Profile race hubs (cassette) with Araya Himiko rims
Tyres,Tioga Comp III (fat front/thin rear)

DINGO

SaMAlex · « **Reply #18 on:** May 14, 2007, 10:27 PM »

Here is that chainring Ive got. Its not all that nice, and its not very light and its got a 19mm hole through it. Its S&M, its 36t, its black, and its yours if you want it. Im guessing you wont want the bolt on goatee.

Caddy555 · « **Reply #19 on:** May 14, 2007, 11:02 PM »

Hey Mark,

She's a beauty, would'nt expect anything else from you.

Now what shall I build next??

Matt Pohlkamp Signature DK?

??

With all the trick bits on it?

Cheers,

Paul.

Mattdub · « **Reply #20 on:** May 14, 2007, 11:10 PM »

Lookin good bud

Dingobmxer · « **Reply #21 on:** May 15, 2007, 06:38 AM »

Cheers Fellas

Paul build that DK mate, sounds sweet already

Alex you got PM

DINGO

priv · « **Reply #22 on:** May 15, 2007, 07:11 AM »

another sweet,clean build dingo,it'll probably freewheel as fast as i can pedal

,how do you get them to run so smooth???

priv

darkersomeday · « **Reply #23 on:** May 15, 2007, 12:58 PM »

sorry dingo i only just clocked this!!

that looks fantastic mate!

what a build, s&m parts specific, all black, simply beautiful

one of THE best builds i've ever seen,

great photo's too!

scooterboy · « **Reply #24 on:** May 15, 2007, 04:42 PM »

back in black !!! good work dingo

Author Topic: S&M Neal Wood finished (Read 2273 times)

zed4130

Flaz

baldbmxer

se

alfie

SaMAlex

SaMAlex

Flying_fox

SaMAlex

SaMAlex

SaMAlex

Caddy555

darkersomeday

scooterboy