headset problem raceface deus headset

[harris]

i have just took a headset of a bike,affixed it to another  now it move back and forth.
the headset is a raceface deus   i cant see why it moves.
has anyone got a diagram as i could have it assembled wrong.

[ronnie360]

harris sounds like you got your self a cameo thing going on in your shed

back and forth 

[MartyC]

Does it have a pressure washer between the forks and the top race?  if so you just need to clamp down on it with the star spangly doofer and the stem, takes a while but you should be able to get enough pressure on to tighten it up, if not ut one or two spacers between the top race and stem and then tighten it up 

[harris]

no the problem is the bearings i think and what place they sit in.they are floating bearings
they dont touch the inside of the bearing cups  like a 1"   the bearings seem to small.

[pickle]

try this mate......hope it helps?

http://www.raceface.com/tech/inst/Deus_DiabolusHeadset.pdf

[harris]

problem solved   
as i knocked the top bearings out with a 22mm socket.
i looked this morn at a socket on the floor,it was wearing a chrome skirt  lol
it was the bearing retainer  that locks it all together   

[pickle]

 



Glad you got it sorted mate 

[harris]

me to mate thanks for the link  ive now serviced it as instruction   
its a quality headset so didnt want to bin it.

[pickle]

too right mate......they don't make too many bad things do Race Face