Author Topic: 12 tooth cassette driver help... (Read 1130 times)

oberonspacefruit · « **on:** April 28, 2007, 07:26 PM »

do you need a half link chain for this?

my chain just dont seem to fit on.....

harris · « **Reply #1 on:** April 28, 2007, 07:28 PM »

i use a khe collapse chain it wraps around tighter.

oberonspacefruit · « **Reply #2 on:** April 28, 2007, 07:29 PM »

is that a half link chain?

is your cog 12 tooth?

harris · « **Reply #3 on:** April 28, 2007, 07:32 PM »

ye its a half link chain and yes mines 12t

oberonspacefruit · « **Reply #4 on:** April 28, 2007, 07:35 PM »

problem solved then.

as a matter of interest have you tried a normal chain on it?

bof · « **Reply #5 on:** April 28, 2007, 07:37 PM »

what chain have you got and what cassette is it you are using, is the chain too long or too short or does it physically not fit onto the sprocket.
there are 2 sizes of chain available 1/8th normal bmx pitch and there is the less commom in the bmx world but some people use them and most MTB and geared bikes use 3/32th pitch

oberonspacefruit · « **Reply #6 on:** April 28, 2007, 07:39 PM »

it doent fit on the sprocket.

not width wise, it fits for 2 or 3 teeth, but then starts to misfit, and it gets progressively worse.

harris · « **Reply #7 on:** April 28, 2007, 07:41 PM »

i havent tried it on a larger sprocket yet mate.

SaMAlex · « **Reply #8 on:** April 28, 2007, 07:48 PM »

Quote from: bof on April 28, 2007, 07:37 PM

what chain have you got and what cassette is it you are using, is the chain too long or too short or does it physically not fit onto the sprocket.
there are 2 sizes of chain available 1/8th normal bmx pitch and there is the less commom in the bmx world but some people use them and most MTB and geared bikes use 3/32th pitch

I thought that 1/8th and 3/32nds was the width and not the pitch. A chainring and sprocket that are for 3/32 will take a 1/8 but it will be a little sloppy side to side. (eg, I think flight rings and shimano freewheels take both chain sizes).

The half link thing is just to do with getting the rear wheel in the right place, esp important as many NS dropouts have very little slot length. The style of a chain with all half links is just that, style, and it also means you can get the wheel placement spot on without having to get an extra half link like you would if you ran a normal chain. Having said that, some of the half link chains do cope with the tight curve of a small sprocket better than some normal style chains.

It sounds like your chain just dont wanna cope with the tight radius so you need to get a more suted one. Doesnt have to be a half link style, but just one designed for small sprockets.

oberonspacefruit · « **Reply #9 on:** April 28, 2007, 07:53 PM »

such as?

will the khe collapse be suitable?

its not my bike, its my sons, and weve just driven 50 miles there, and 50 miles back to get new cranks/chainwheel/driver and having spent 170 quid of his hard earned pocket money, you can imagine how gutted he is...

harris · « **Reply #10 on:** April 28, 2007, 07:55 PM »

there are many out there phil.did you get any larger rings you could just use for now.

SaMAlex · « **Reply #11 on:** April 28, 2007, 07:58 PM »

The bike Ive got right now is the first bike Ive had with a small drive so I dont have too much knowlage of it. I use a loophole chain that I got from alans (or was it loophole direct?). Its a normal style chain but I got it cos it was black. I had to get a half link to get the back wheel all the way forward in the dropout but it coped with the 10t sprocket fine.

Id say just call up a shop tomorrow, or even take the back wheel into a shop.

oberonspacefruit · « **Reply #12 on:** April 28, 2007, 08:01 PM »

yeah, i had a 16 too, so thats on it now.

he's got his powerbites on now, but, dont laugh, i didnt realise they had chainring holes on both sides so i put the arms on the wrong side and now his pedals are back to front.

by this point he's sayin...fook it im just off for a ride...lol...

those euro bb's are a pain in the ass to fit too, if you dont have the tool for it.

harris · « **Reply #13 on:** April 28, 2007, 08:04 PM »

so you had fun then phil,i use a khe collapse pro chain it will fit around you thumb lol

oberonspacefruit · « **Reply #14 on:** April 28, 2007, 08:06 PM »

Quote from: S&MAlex on April 28, 2007, 07:58 PM

The bike Ive got right now is the first bike Ive had with a small drive so I dont have too much knowlage of it. I use a loophole chain that I got from alans (or was it loophole direct?). Its a normal style chain but I got it cos it was black. I had to get a half link to get the back wheel all the way forward in the dropout but it coped with the 10t sprocket fine.

Id say just call up a shop tomorrow, or even take the back wheel into a shop.

it was alans i bought all the stuff from, but alan was out, so i didnt have his expertise to rely upon.

the guy who was in there was a bit slow tbh. ordered a new bike for my other son, and he was going on about it having to be built, and checked, when it was already sat in the cellar built...
then... said he didnt know what seatpost would fit in an 06 ripper, and he couldnt check cos they were out of stock, then the other guy who knew his shit went downstairs and found one right in front of him...

not been too productive today tbh.

oberonspacefruit · « **Reply #15 on:** April 28, 2007, 08:07 PM »

Quote from: harris on April 28, 2007, 08:04 PM

so you had fun then phil,i use a khe collapse pro chain it will fit around you thumb lol

ill order one of them then dan.

harris · « **Reply #16 on:** April 28, 2007, 08:09 PM »

you should also ask someone like danair or fish they might recomend an alternative.

oberonspacefruit · « **Reply #17 on:** April 28, 2007, 08:11 PM »

too late, just did it.

on your head be it mr harris.

i hope my son does not have to weep his tears due to misinformation from his peers.

harris · « **Reply #18 on:** April 28, 2007, 08:12 PM »

lol na mate that will fit

QUADROPHENIA · « **Reply #19 on:** April 28, 2007, 08:32 PM »

salt chain £10 or shadow conspiracy in my garage to you, breast massage

oberonspacefruit · « **Reply #20 on:** April 28, 2007, 08:33 PM »

Quote from: QUADROPHENIA on April 28, 2007, 08:32 PM

salt chain £10 or shadow conspiracy in my garage to you, breast massage

is that with or without lubricant?

i have warming, or tingling.

lazychubs · « **Reply #21 on:** April 28, 2007, 10:07 PM »

khe pro collpase is the best chain to get
i use it and crazy pat

bof · « **Reply #22 on:** April 28, 2007, 10:41 PM »

yeh sorry got my pitch and width mixed up , but what i said still stands I have a ten tooth driver on my bike and I use a cheap kmc z chain about £8 if memory serves me correctly, If the chain is the correct width it will fit any size sprocket

Author Topic: 12 tooth cassette driver help... (Read 1130 times)

bof

SaMAlex

SaMAlex

bof