Tyre Pressure?

[scooby74]

whats recommended as the best all round PSI to run your tyres at?

[phantom photon]

I usually run 40psi but everyone has their own preference 

[brass monkey!]

i usually do mine on 'feel' ie: they feel right !! 

[zed4130]

Would depend on what sort of wheels & tyres?

Bru 

yep but i usually run anything from 40 -55 psi track or 65-75 street  85 if iwant to push it 

[scooby74]

cheers folks - time to get the bike pump back out 

[Moose]

4 bar 

[priv]

the harder they are the smoother they roll,your better using a proper floor pump too.


priv

[gary4130]

on my flat bike i go for 80psi,other spokes 60-80,on tuffs though no more than 55 otherwise tyre starts peeling off the rim

[Dingobmxer]

60 front 80 rear on my NS race bikes 
if its old school I would run  just enough to keep the rims off the floor as no one runs a chain on them so they arent going anywhere 
  DINGO

[Obbie]

110 psi on mine , if not they feel flat and i'm all over the place , but it does depend on rims and tyres .

[stidds]

90-100psi on my street bike.
70-80psi on my new school race bikes
50psi on my oldschool bikes

[motomagII]

70 psi in mine maybe tad less i the front .less than that they feel flat

[MartyC]

For old school tyres around 45 psi, comp pools and new school tyres around 60 to 80 psi depending on what terrain you are riding

[hunterdubber]

Yeah deffo no less than 80 on New skool stuff ( you can put 120 psi in most )and you,ll roll fast as fook in a park  (only a true reading with a proper track pump ,about  £12 worth every penny ). but ol, skool tuffs I,d say around only 40 ish coz it says so on most tyres and they,d probably split a gumwalled tyre with anything more

[MeddlE]

60psi on my graphite tuffs, 110psi on my new school park bike.