Author Topic: Cruiser Number Plate Suggestions (Read 2739 times)

Sanmarcopizza · « **on:** September 27, 2006, 02:49 PM »

I want a plate on my Redline PL24. In the past I have run this.

Are there any cruiser specific plates. Show me some pics or make some suggestions guys. Did Redline have a team spec plate ?

diesel · « **Reply #1 on:** September 27, 2006, 03:28 PM »

What bars are you running?

zeronine moto control?

custom made plate?

RATTY · « **Reply #2 on:** September 27, 2006, 03:29 PM »

http://cgi.ebay.co.uk/REDLINE-BMX-NUMBER-PLATE-2004-TEAM-PRO-7X11_W0QQitemZ120034555066QQihZ002QQcategoryZ56187QQrdZ1QQcmdZViewItem

stidds · « **Reply #3 on:** September 27, 2006, 03:33 PM »

San, I didn't want to use any of the modern (ugly) number plates on my cruiser so I bought a red Uni Pro Plate and cut it down to the size I wanted. Looks ace if I do say so myself, I will post a picture later when I get home from work.

Sanmarcopizza · « **Reply #4 on:** September 27, 2006, 03:35 PM »

Thanks Tony, I want something more in keeping for 83/84.

Dan, I hope to get some PL24 Cruiser Bars, so will have a wide cross bar.

Sean, sounds interesting

RATTY · « **Reply #5 on:** September 27, 2006, 03:41 PM »

Oh I thought you went all new school on us mate...Post a few pics up mate

Sanmarcopizza · « **Reply #6 on:** September 27, 2006, 03:43 PM »

My old and trusty PL24. Will have a few minor changes, including bars in due course.

Dingobmxer · « **Reply #7 on:** September 27, 2006, 04:09 PM »

haro did a mini/cruiser plate, I sold one to someone on here, one of the DB boys,ask them

DINGO

RATTY · « **Reply #8 on:** September 27, 2006, 04:23 PM »

ummm I luv that bike san......

wolfybmx · « **Reply #9 on:** September 27, 2006, 04:53 PM »

mirage number plates were always very good

DR VINOAH · « **Reply #10 on:** September 27, 2006, 05:46 PM »

PL24

yum yum yummy

as for the plate

the uni sounds a goer

stidds · « **Reply #11 on:** September 27, 2006, 11:09 PM »

Here are the pictures of my Uni Plate.

dj_benice · « **Reply #12 on:** September 27, 2006, 11:26 PM »

uni turbo mini plate if the spread is enough :o)

se · « **Reply #13 on:** September 28, 2006, 07:09 AM »

After a long seach I found a Zeronine Mini Flow and it looks perfect. Mini plats are best for cruiser I reckon. One of those J2 Micro Minis would be spot on if I could find one. In the meantime the other cruiser will have to make do a Series One sailboard.

nic968 · « **Reply #14 on:** September 28, 2006, 05:10 PM »

Zeronine did a nice cruiser plate...It's worth looking at old school mini's too...
You'll just have to make sure they're wide enough,especially if you get hold of the original redline bars...

Flying_fox · « **Reply #15 on:** September 28, 2006, 06:32 PM »

I used mini paltes on my cruiser in the 80s, my Tom Lynch signature URP one was the fave.

These days I use an ugly modern one on my ugly modern cruiser (or I would if I ever bothered to race it).

zed4130 · « **Reply #16 on:** September 29, 2006, 08:10 PM »

No what you mean fox i ended up selling my rm24 just hardly used it i stick to 20 inch 24 seemed a bit clumbsy just me .

RATTY · « **Reply #17 on:** September 30, 2006, 09:27 PM »

San, have you seen wolfys plates, he has a uni mini 4 sale

danny silverstreak · « **Reply #18 on:** September 30, 2006, 09:47 PM »

Quote from: dingobmxer on September 27, 2006, 04:09 PM

haro did a mini/cruiser plate, I sold one to someone on here, one of the DB boys,ask them
DINGO

you sold me the haro mini series plate dingo for my little turbolite

Sanmarcopizza · « **Reply #19 on:** October 01, 2006, 10:36 AM »

Quote from: ratty on September 30, 2006, 09:27 PM

San, have you seen wolfys plates, he has a uni mini 4 sale

Yeah Cheers Tony. It's a little on the yellow side for my bike. Do number plates take dye ?

RATTY · « **Reply #20 on:** October 01, 2006, 06:39 PM »

Quote from: Sanmarcopizza on October 01, 2006, 10:36 AM

Quote from: ratty on September 30, 2006, 09:27 PM
San, have you seen wolfys plates, he has a uni mini 4 sale

Yeah Cheers Tony. It's a little on the yellow side for my bike. Do number plates take dye ?

San have you thought about spraying it!! I know a couple who did it with reaqsonable results

Sanmarcopizza · « **Reply #21 on:** October 02, 2006, 08:13 AM »

Hmmmm, I bet I'd use the wrong paint and melt it. I have one of the larger Turbo Pro plates, I could do like Stidds and trim that to shape. Everyones a winner.