Author Topic: DOES NITROMORS HURT TUFF WHEEL PLASTIC ?. (Read 1339 times)

dordymush · « **on:** February 07, 2007, 05:36 PM »

as above gents.
got some tuffs that had the hub painted gold at sometime and i want it off to polish them up.
will it hurt the plastic of the outer hubb if it goes on it.
dont want to dicolour them.
thanks.
dave.

oberonspacefruit · « **Reply #1 on:** February 07, 2007, 05:38 PM »

no dave.

selfpreservation · « **Reply #2 on:** February 07, 2007, 05:43 PM »

id doubt it nylon resists most chemicals

dordymush · « **Reply #3 on:** February 07, 2007, 05:44 PM »

Quote

no dave.

l

thanks for that information filled reply phil

.

oberonspacefruit · « **Reply #4 on:** February 07, 2007, 05:46 PM »

short and sweet.

id be more worried about the alloy.

i left some in bleach for 2 weeks and it discolourd the alloy.

the actual nylon will take no harm from nitromors

selfpreservation · « **Reply #5 on:** February 07, 2007, 08:55 PM »

nylon , depending on the grade ie ny 6 or 66 (66 being best)will resist most chemicals better than any other substance except PTFE (teflon to you and me , the stuff you put on your riders chain/present on your fryingpan) Ptfe will resist every substance known to man except mustard gas and is still the most resistant substance known to mustard gas there is, it also has the lowest friction coefficient of any solid known to man(hence the use as a lubricant ) , it is also has the greatest working temperature spectrum of any man made substance , it will maintain its properties between - 450 and 300 deg c , its amasing if your interested

Waxintaxin · « **Reply #6 on:** February 07, 2007, 09:01 PM »

And its used in plumbing lol

Rombloke · « **Reply #7 on:** February 07, 2007, 09:05 PM »

man made substance anorak alert...WARNING WARNING

Dave

oberonspacefruit · « **Reply #8 on:** February 07, 2007, 09:13 PM »

so how do they get it to stick to the pan, if its non stick?

selfpreservation · « **Reply #9 on:** February 07, 2007, 09:17 PM »

it has properties similar to most non oil based plastics , it can be bonded at extreme temperatures to any surface , incidently its the reason why superglue doesnt stick to the tube

CD17 · « **Reply #10 on:** February 07, 2007, 09:51 PM »

Quote from: selfpreservation on February 07, 2007, 09:17 PM

it has properties similar to most non oil based plastics , it can be bonded at extreme temperatures to any surface , incidently its the reason why superglue doesnt stick to the tube

Feck how come you know so much intersting stuff