Author Topic: Oxalic Acid? (Read 2961 times)

Stodgy · « **Reply #25 on:** February 05, 2007, 07:51 AM »

Quote from: DaveMac on February 04, 2007, 07:37 PM

Is it right it doesn't touch decals too if you do the whole frame???

Dave's got a point, anyone know?

dj_benice · « **Reply #26 on:** February 05, 2007, 09:18 AM »

yup it don't touch decals, anybody in the north west got owt rusty and I'll do a how to,goggles gloves and all ;o)

Coastvl · « **Reply #27 on:** February 05, 2007, 09:26 AM »

I used this goose frame as a river jumper into Salt water !!! It was pretty bad. After a few days (3) it needed a little rub (who doesn't?) and it now blings. I dont have any pics but I'll get some.
Dont put aluminium parts or frames in this stuff. You'll end up with nothin!

Stodgy · « **Reply #28 on:** February 05, 2007, 09:27 AM »

Zippy · « **Reply #29 on:** February 05, 2007, 11:36 AM »

When something rusts though doesn't the chrome pit badly?

Does this stuff stop the pitting as well?

Frosty · « **Reply #30 on:** February 05, 2007, 03:55 PM »

Zippy,

If it is badly pitted you'll still have the pits but less the rust. It is vital that post this treatment the frame is also rust proofed or at the very least wd 40'd to prevent the rust re-appearing very quickly especially in the inside of tubing etc.

Paul

davemac1974 · « **Reply #31 on:** February 05, 2007, 04:51 PM »

Am I right in thinking then that this is only an option if the frame is really bad, if it leaves it vulnerable?

My Cali frame has some rust patches, but isn't too bad. Am I better using a little Autosol, and a shed load of elbow grease?