Author Topic: Haro 84' master, what stem should I use? (Read 2344 times)

mivvi · « **on:** January 17, 2007, 10:52 AM »

I am starting to build my 84' Haro and not sure what stem should go on it? I have a couple of Group 1 stems but didn't they come later? I would prefer not to use a Group 1 as they are really heavy, im building this bike as light as I can. I also have the correct bars so don't really want to go down the one piece Vector bars route if poss. Any help would be great, thanks!

Moose · « **Reply #1 on:** January 17, 2007, 10:56 AM »

Depends - are you going for 'factory complete' or just era correct?

mivvi · « **Reply #2 on:** January 17, 2007, 10:59 AM »

Doesn't really matter. I just thought when I bought the frame, perfect I have a group 1 stem. Then I realised how heavy they were!

Moose · « **Reply #3 on:** January 17, 2007, 11:02 AM »

Tuf-neck
Pro-neck
Suntour
Anlun
Tioga
ACS
Sugino?

mivvi · « **Reply #4 on:** January 17, 2007, 11:10 AM »

Ah, plenty to choose from then,!

Out of interest, what would have been the correct part fitted to an 84' leaving the factory?

snav69 · « **Reply #5 on:** January 17, 2007, 11:15 AM »

This do ya'

1984 Haro Master Factory Build Components

These components are the same for White and Chrome bikes

Grips: Oakley B2, Blue
Bars: Vector Bob Haro, Chrome
Stem: Redline Forklifter
Brakes: Dia Compe MX900, Annodized Blue with Tech 3 Levers and Green Cables
Headset: Hatta Alloy, Annodized Blue
Seatpost Clamp: Dia Copme Hinged, Annodized Blue
Seatpost: Anlun Layback Smooth, Chrome
Seat: Cycle Pro Shotgun II, Blue
Wheels: Skyway Tuff IIs with coasterbrake, alloy front hub, White
Tires: Cycle Pro Snakebelly
Cranks: Sugino CT 175mm, Chrome
Chainring: Sugino 43T, Annodized Blue
Pedals: MKS Grafight, Black

Paul

Moose · « **Reply #6 on:** January 17, 2007, 11:20 AM »

Quote

Bars: Vector Bob Haro, Chrome
Stem: Redline Forklifter

Huh

Vector Bob's and a stem?

I think not. The bars are VC8's and the stem.....well ask Jay

snav69 · « **Reply #7 on:** January 17, 2007, 11:24 AM »

http://www.harofreestyler.com/master.html

I added the forklifter $:-\$

Moose · « **Reply #8 on:** January 17, 2007, 11:28 AM »

Quote

Out of interest, what would have been the correct part fitted to an 84' leaving the factory?

Sorry, I missed your post asking to know.

There has been some discussion on the stem. The first test of a complete '84 Master showed a Tioga stem, but it did say this would be changed for production. Jay has a test where the stem is quoted as being a Suntour Power stem and I must admit, I'm now coming around to this being fact. I thought that it was an Anlun (but not the same type as on the sport), but I think now the suntour makes more sense.

mivvi · « **Reply #9 on:** January 17, 2007, 11:31 AM »

Thanks Phil for your input and Paul for the Link that's damn handy to have. So what is the stem in the top pic? Here are the bars I will be fitting once chromed.

Moose · « **Reply #10 on:** January 17, 2007, 11:32 AM »

Those bars on dan's '84 are VC8's and the stem is an Anlun (as supplied on the '84 Sports). If I remember correctly he used to have just Bob Haro bars on that '84 and has since updated the picture, but not the text.

snav69 · « **Reply #11 on:** January 17, 2007, 11:32 AM »

Dunno about a suntour stem but according to the 1984 haro catalog it was a forklifter , they probably changed it without notice $:-\$ , Like they do

Moose · « **Reply #12 on:** January 17, 2007, 11:35 AM »

The catalogue is a late '84 one - look at the picture, does that look like a forklifter?

snav69 · « **Reply #13 on:** January 17, 2007, 11:38 AM »

WOW , Attitude , did i say it was . Just stating what it said in the catalog . Is it not from 84 Like mivvi asked YUP it is .

Moose · « **Reply #14 on:** January 17, 2007, 11:48 AM »

No attitude - just asking a question. Please don't read something into my posts that's not there, ok

The catalogue is from '84, but I've never seen a complete '84 factory picture with the forklifter stem. The forklifter stem had a potts mod and personally, I'd never put a pott's mod stem on an '84 - my opinion only of course.

Edit: I should re-phase that to say The forklifter stem had a potts mod and personally, I'd never put a pott's mod stem on an '84 unless it's a Redline RL20 - my opinion only of course.

Moose · « **Reply #15 on:** January 17, 2007, 11:49 AM »

snav69 · « **Reply #16 on:** January 17, 2007, 11:53 AM »

?

Handlebar Stem - Tioga (will be changed for production)

So what you getting at ??

I try and help someone out with information Provided by Haro and i get a nit picker picking at the slightest detail . No wonder people get fooked off and leave

MartyC · « **Reply #17 on:** January 17, 2007, 11:58 AM »

Group Hug Time

I think you've both been making the same point and prove how difficult interpretation of the written word can be

snav69 · « **Reply #18 on:** January 17, 2007, 12:00 PM »

Quote from: MartyC on January 17, 2007, 11:58 AM

Group Hug Time

I think you've both been making the same point and prove how difficult interpretation of the written word can be

I have no beef with anyone

, just seemed like he (moose) was trying to put me down

MartyC · « **Reply #19 on:** January 17, 2007, 12:02 PM »

Quote from: snav69 on January 17, 2007, 12:00 PM

Quote from: MartyC on January 17, 2007, 11:58 AM
Group Hug Time

I think you've both been making the same point and prove how difficult interpretation of the written word can be

I have no beef with anyone , just seemed like he (moose) was trying to put me down

I'm sure it was not intended that way, Moose is a top bloke and always very helpful

snav69 · « **Reply #20 on:** January 17, 2007, 12:04 PM »

I don't doubt that for 1 min Marty

I know he knows his stuff and has some great bikes , i just quoted from the haro catalog , thats all

Moose · « **Reply #21 on:** January 17, 2007, 12:08 PM »

Quote from: snav69 on January 17, 2007, 11:53 AM

?

Handlebar Stem - Tioga (will be changed for production)

So what you getting at ??

I try and help someone out with information Provided by Haro and i get a nit picker picking at the slightest detail . No wonder people get fooked off and leave

Mivvi, it's your bike, you put whatever stem you want to build it with

snav69 - When I build my bikes, I'm interested in detail (nit-picking as you call it), that's just the way I am and I'm not going to apologise for it.

snav69 · « **Reply #22 on:** January 17, 2007, 12:14 PM »

I think there has been too much falling out over the past few days with various members , i don't want it to carry on with me at the wheel

Lets just let it rest

theRuler · « **Reply #23 on:** January 17, 2007, 12:16 PM »

you pair of gays.
an SR stem will do

mivvi · « **Reply #24 on:** January 17, 2007, 12:17 PM »

Hey, chill out lads. There was a lot of changes at the times of these bikes being built and a lot of different views on it. You have both given me all the info I needed and I appreciate the help. Shake hands and lets just get on with each other for the sake of this great hobby. Thanks again all! Mivvi.

Author Topic: Haro 84' master, what stem should I use? (Read 2344 times)

snav69

snav69

snav69

snav69

snav69

snav69

snav69

snav69

theRuler