Author Topic: what type is this bottom bracket? (Read 1892 times)

theRuler · « **on:** January 15, 2007, 01:36 PM »

on my 04 proper houdini frame

it's threaded and about 36mm I/D

??

harris · « **Reply #1 on:** January 15, 2007, 01:38 PM »

spanish maybe

aditup2004 · « **Reply #2 on:** January 15, 2007, 01:38 PM »

Is it not the standard Euro BB? as opposed to the Us BB for a OPC

theRuler · « **Reply #3 on:** January 15, 2007, 01:40 PM »

i bought it as a "spanish BB" frame, but i am looking to buy a bb set for it, and i am finding they are press in cups. (the spanish bb sets)

theRuler · « **Reply #4 on:** January 15, 2007, 01:41 PM »

but i need threaded. question is, what size?

are there spanish threaded cups? or is it just euro.

aditup2004 · « **Reply #5 on:** January 15, 2007, 01:43 PM »

Just been looking on Alans, and at quick glance, can only see the euro which is threaded.

theRuler · « **Reply #6 on:** January 15, 2007, 01:44 PM »

me too
anyone got a euro bb frame they can measure for me please?
the I/D of the bb toob

aditup2004 · « **Reply #7 on:** January 15, 2007, 01:45 PM »

Spanish BB is deffo pressed in.
Euro screws in.
US press in (obviously)

theRuler · « **Reply #8 on:** January 15, 2007, 01:46 PM »

looks like a euro then.

anyone got a euro bb set for sale, that will fit a redline proline crank?

aditup2004 · « **Reply #9 on:** January 15, 2007, 01:46 PM »

Read the description Gra;
http://www.alansbmx.com/product_info.php?cPath=32_35&products_id=4195
Ad

harris · « **Reply #10 on:** January 15, 2007, 01:59 PM »

there should be a few about as they come free with some flight cranks mine did but using on the kappa
i will see if i have others

theRuler · « **Reply #11 on:** January 15, 2007, 02:03 PM »

thanks mate
i need a 19mm one

oberonspacefruit · « **Reply #12 on:** January 15, 2007, 02:06 PM »

why, are prolines 19mm? im sure they are bigger.

put it this way, i tried fitting a new profile bearing onto the shaft of my prolines yesterday, and it didnt fit.

theRuler · « **Reply #13 on:** January 15, 2007, 02:07 PM »

i havent measured it, i just figured this would fit:

http://www.amazon.com/REDLINE-Proline-Chainwheel-Spindle-Black/dp/B000C15KWA

oberonspacefruit · « **Reply #14 on:** January 15, 2007, 02:10 PM »

yes, maybe....but the axle is chamfered? (goes thinner) so the bearings will go on further.

not trying to be a pain , they may fit, but i would really measure it first, im sure its bigger.

slap me next time if im spouting shit.

theRuler · « **Reply #15 on:** January 15, 2007, 02:12 PM »

right i will whip it out and measure the girth . . .

harris · « **Reply #16 on:** January 15, 2007, 02:14 PM »

oberonspacefruit · « **Reply #17 on:** January 15, 2007, 02:15 PM »

whoah tiger.

harris · « **Reply #18 on:** January 15, 2007, 02:17 PM »

look at tag man fruit

oberonspacefruit · « **Reply #19 on:** January 15, 2007, 02:18 PM »

you know it.

theRuler · « **Reply #20 on:** January 15, 2007, 02:24 PM »

just measured the bearing hole

its about 19.5mm

oberonspacefruit · « **Reply #21 on:** January 15, 2007, 02:24 PM »

HA HA.....made you measure.....

oberonspacefruit · « **Reply #22 on:** January 15, 2007, 02:25 PM »

btw that means ive just wasted 26 quid on bearings.

theRuler · « **Reply #23 on:** January 15, 2007, 02:26 PM »

Quote from: oberonspacefruit on January 15, 2007, 02:25 PM

btw that means ive just wasted 26 quid on bearings.

pack the spindle out with some tape

jT Racing · « **Reply #24 on:** January 15, 2007, 06:20 PM »

well i see 20.5 - 21mm on your tape measure you blind bugger

Author Topic: what type is this bottom bracket? (Read 1892 times)

theRuler

theRuler

theRuler

theRuler

theRuler

theRuler

theRuler

theRuler

theRuler

theRuler