odyssey hazzard cassette hub wtf

[The-flying-banana]

Brand new with a ten tooth driver and its missing a beat every now and then it misses a tooth or summit you know ! you feel as if yer goolies are gonna wack the stem

Talking to a few peeps about these and apparantly they all do it wtf should i do send it back as its false advertizing saying they are great and all when obviously they have a fecking major design flaw :o £95 quids worth of crapo

[ORB]

Get some Peregrine HP Super Pro's in Chrome.

[lazychubs]

yep mines the same but is 3rd hand lol it seems better now ive filled it up with 3in one oil
tho

[The-flying-banana]

Orb ye man they will fit the 14mm holes in me frame and there's nowt wrong with me rims

 rhys i think i will try this what a piece of cack this hub really is wish i had bought a profile or primo now

[lazychubs]

mines the old one which looks like a grifters rear hub

[The-flying-banana]

Ye mate i put them in the box and fitted a seperate driver  i can buy a profile titanium driver to fit it, in 9 tooth form, but at £78  i think its the ring gear inside as there not a lot depth to the teeth

[lazychubs]

or the pawls aint releasing properly thats y i used thin oil in it
cleaned it right out first tho

[The-flying-banana]

I,ll try some hydraulic oil in it rhys and let you know how i go cheers again dude

[lazychubs]

ok cool ive gotta get a new axle kit for mine as me bearings are shot

[Rombloke]

ok, there was an article in ride about cassete hubs and lubing them up...i think when they are packed with grease there is the benefit of a quiet freewheel click but the minus side is that the pawls dont somtimes release, resulting in them skipping a notch every now and then.
im sure the recomendation in ride was to use a thin grease rather than oil, ie marine grease, which i know is fairly runny, as i used to have to use it on my jetski prop shaft....good luck

Dave

[Donker]

£95 for a hub!

you must be a millionaire bannana

[Donker]

and by the way, muck around with it, grease, oil, etc...... not likely..............

SEND IT BACK TO EM, TOSSERS.

[daze]

mines not skipped a beat in a year!!  not got a driver tho must admit, just using the 12t cog that came with it.   

[Andy]

Its swings and roundabouts with these hubs but I use a profile SS hub, I know £170 is a lot of money but I cant fault mine,

Andy

[The-flying-banana]

Here's an update

Well but some oil in and made no diffrence still a piece of sh*t click ,crunch etc etc

DO NOT BUY ONE OF THESE HUBS or you'll be throwing your money away as i have asked about and the majority do crunch and click with only the odd few not 

[oberonspacefruit]

get some skyways on it.  15 quid for a shimano freewheel.

[The-flying-banana]

Too flexi for me now fruits im thinking of going the flip flop route