Author Topic: Tempted to build a cruiser (Read 2739 times)

oldsky · « **on:** December 26, 2006, 07:25 PM »

but dont know jack about em. Any suggestions on which way I should go ie make etc. And are the parts on the early ones getting hard to get hold of?

Thanks

Andy

lazychubs · « **Reply #1 on:** December 26, 2006, 07:32 PM »

ive looked at a few cruisers too
but cant decide wot to get either lol

harris · « **Reply #2 on:** December 26, 2006, 07:34 PM »

i got my yes 2400 cruiser a few months back but hot started it yet
go for anything .

oldsky · « **Reply #3 on:** December 26, 2006, 07:38 PM »

Its the idea of 24" tuffs that are pulling me in.

jT Racing · « **Reply #4 on:** December 26, 2006, 08:02 PM »

i got three, they are nice but even bigger to have hanging around your house. be warned, they are well nice to have and make a decent rider too if you wanted to use them.

stuntmaster · « **Reply #5 on:** December 27, 2006, 07:50 AM »

good luck if it old skool as wheels and bars are a bitch to find .if it`s nu skool then no worries

zed4130 · « **Reply #6 on:** December 27, 2006, 08:14 AM »

if its newschool your building the 2004 db rm24 was a great bike i still regret selling mine

brass monkey! · « **Reply #7 on:** December 27, 2006, 08:45 AM »

hnmm, 24" cruiser

A Floval Flyer
Torker
or ultimately

a VDC Gorilla would do me...., cos there's loads about !

Mattdub · « **Reply #8 on:** December 27, 2006, 11:40 AM »

Quote from: monkeybiscuits! on December 27, 2006, 08:45 AM

hnmm, 24" cruiser

A Floval Flyer
Torker
or ultimately

a VDC Gorilla would do me...., cos there's loads about !

I raced a VDC Gorilla in the 80's , here at British Champs 1986 in front of Dale Holmes

Just wish I had'nt sold it !

If you're looking at a OS cruiser build then as Paul ( Stuntmaster ) says , the 24 specific parts are harder to come by and can be expensive ( sometimes quite a bit more than 20" bits ! ) .

zed4130 · « **Reply #9 on:** December 27, 2006, 02:01 PM »

in front of mr car boot himself' i like it

lazychubs · « **Reply #10 on:** December 27, 2006, 06:24 PM »

quadpaul has his dads old vdc cruiser

DR VINOAH · « **Reply #11 on:** December 27, 2006, 06:55 PM »

jeez

i gotta see that

THE TUF*NECK · « **Reply #12 on:** December 27, 2006, 10:26 PM »

that looks like a zeronine bike

jT Racing · « **Reply #13 on:** December 28, 2006, 11:59 AM »

can i find cruiser bars, can i fook. i am tempted to make a set. I have three sets but not the ones i want. it's not fair.

dj_benice · « **Reply #14 on:** December 28, 2006, 12:02 PM »

what sort you need john I have some alleged CW's on me GT cruiser

Mattdub · « **Reply #15 on:** December 28, 2006, 12:03 PM »

Quote from: THE TUF*NECK on December 27, 2006, 10:26 PM

that looks like a zeronine bike

?

jT Racing · « **Reply #16 on:** December 28, 2006, 12:12 PM »

Quote from: dj_benice on December 28, 2006, 12:02 PM

what sort you need john I have some alleged CW's on me GT cruiser

i have 2 kuwi cruisers, and no kuwi cruiser bars

, i have a gt from 85 with a choice of bars. i want kuwi cruiser bars or kos cruiser bars. If you see some, LMK please

john.

Did cw do cruiser bars? i would like to see them.

DR VINOAH · « **Reply #17 on:** December 28, 2006, 12:29 PM »

jon

roonga runs a set of cruiser CW,s on his Torker 24

maybe he can sort a pick 4 u

they look like large mini bars

if u get ma drift

lower maybe 6" rise,but full width 27"?

dj_benice · « **Reply #18 on:** December 28, 2006, 12:31 PM »

Yup got an advert for em somewhere, mine are on the GT below just not sure if genuine as knurling is horizontal as opposed to usual diamond knurling on CW's

Will keep eye out for them, quite like the redline pl24 cruiser bars too they are sweet

will get in touch with ya soon re your local shop John, just got no $ in paypal at moment

MartyC · « **Reply #19 on:** December 28, 2006, 12:51 PM »

Quote from: Townshend BMX® on December 28, 2006, 12:12 PM

Quote from: dj_benice on December 28, 2006, 12:02 PM
what sort you need john I have some alleged CW's on me GT cruiser

i have 2 kuwi cruisers, and no kuwi cruiser bars , i have a gt from 85 with a choice of bars. i want kuwi cruiser bars or kos cruiser bars. If you see some, LMK please

john.

Did cw do cruiser bars? i would like to see them.

Your less than favourite guy in Australia (JohnnyChopper) makes repro Kos Kruiser bars if you are desperate, I think they are branded as repro's too

pickle · « **Reply #20 on:** December 28, 2006, 01:03 PM »

Correct me if i'm wrong guys....but isn't a 'new skool' cruiser just a single speed MTB? $:-\$

zed4130 · « **Reply #21 on:** December 28, 2006, 01:15 PM »

Quote from: pickle on December 28, 2006, 01:03 PM

Correct me if i'm wrong guys....but isn't a 'new skool' cruiser just a single speed MTB? $:-\$

or is a single speed mtb a 26 inch bmx cruiser

jT Racing · « **Reply #22 on:** December 28, 2006, 01:30 PM »

no. BMX is BMX

jT Racing · « **Reply #23 on:** December 28, 2006, 01:34 PM »

Quote from: MartyC on December 28, 2006, 12:51 PM

Quote from: Townshend BMX® on December 28, 2006, 12:12 PM
Quote from: dj_benice on December 28, 2006, 12:02 PM
what sort you need john I have some alleged CW's on me GT cruiser

i have 2 kuwi cruisers, and no kuwi cruiser bars , i have a gt from 85 with a choice of bars. i want kuwi cruiser bars or kos cruiser bars. If you see some, LMK please

john.

Did cw do cruiser bars? i would like to see them.

Your less than favourite guy in Australia (JohnnyChopper) makes repro Kos Kruiser bars if you are desperate, I think they are branded as repro's too

No way i am promoting that. Old school all the way.

MartyC · « **Reply #24 on:** December 28, 2006, 04:08 PM »

Quote from: Townshend BMX® on December 28, 2006, 01:34 PM

Your less than favourite guy in Australia (JohnnyChopper) makes repro Kos Kruiser bars if you are desperate, I think they are branded as repro's too

No way i am promoting that. Old school all the way.

John, I can understand that, I think they would be OK for putting on a new school ride to give that old school look and feel but don't think I'd put them on an old school ride

Author Topic: Tempted to build a cruiser (Read 2739 times)

oldsky

oldsky

zed4130

zed4130

DR VINOAH

THE TUF*NECK

dj_benice

DR VINOAH

dj_benice

zed4130