Author Topic: Tange headlock probs. (Read 1730 times)

Lawrie · « **on:** October 04, 2005, 09:02 AM »

Hey fellas.

My first mail to the site, sorry it's not more interesting than my headlock problems!

Here goes anyway. I have a Quadangle (i'll send in pics when i've put it back together) to which i'm trying to fit a Tange headlock. The problem is that the steerer tube of the Landing Gears is so long that the top 'nut' piece of the headlock can't screw down far enough so that it's flush with the silver washer type part of the headlock. The only way I can see to resolve this problem is to either cut down the steerer tube (which I probably will when I have the tools) or to leave the washer from the Hatta headset in place, so that it reduces the length of the steerer tube.

I know that may be a bit hard to understand :o but i'm hoping that some of you have had a similar problem and fixed it, in which case you'll know what i'm on about!

Anyway if anyway can help out i'd be grateful.

Cheers, Lawrie.

oberonspacefruit · « **Reply #1 on:** October 04, 2005, 09:08 AM »

i think u just answered your own question. spacers or choppage.

any one else?

theRuler · « **Reply #2 on:** October 04, 2005, 09:20 AM »

see how the height feels with spacerage first

if its too high then go for sawage

back when all i could find were tall bars i'd cut down the steerer tube, to drop an extra half inch (before inverted clamp on stems etc) for centre of gravity lowerage

welcome to radbmx.co.uk. get your saw out

holeshotter · « **Reply #3 on:** October 04, 2005, 11:05 AM »

Yep spacers first then saw

Rombloke · « **Reply #4 on:** October 04, 2005, 02:29 PM »

alloy spacer from your local bike shop....couple of quid tops....

then like you said..if that dont work...choppage of steerage tubeage

whats with all the 'age in this this thread

good luck and welcome to the nut house mate

Dave

theRuler · « **Reply #5 on:** October 04, 2005, 02:35 PM »

this thread has more than it's fair share of ageage

SAND N DIRT · « **Reply #6 on:** October 04, 2005, 07:11 PM »

Ok, here it goes. Sometimes when a headset was purchased bitd from the same model there was this silver ring added to solve this 'small' problem. A ring, made by Tioga and made especially for that headset. Perhaps you will notice 2 allen keys (black) inside of the headlock. Now, does 2 allenkeys thingies (my English is not that ok...) tight them all the way down when they touch that silver ring. Hopefully you understand and hopefully there will be a pictured placed soon and hopefully you find what you are looking for!

SND