Author Topic: March BOTM Entries - Spring Builds (Read 4151 times)

brettypeeps · « **on:** March 02, 2021, 10:19 PM »

Let's see what you have for March 2021: daumenhoch:

- Please post a full build spec for your entry.
- You may post a maximum of 4 pictures of your bike ( no tiled images - 4 individual pictures )
- You MUST still own the bike you enter.
- Any entrant found 'canvassing' for votes or other forums/social media sites will have their bike removed.
- You do not need to have finished this month. As long as it has not been in BOTM before you can enter.
- All entries must be in before the 1st of the following month or they will be removed.

SDF · « **Reply #1 on:** March 03, 2021, 06:46 AM »

1990 BULLY BASH GUARD.

Was my rider in 1990 for a few months, but it was rubbish on dirt, so I upgraded to a PK RIPPER XL.

PARTS LIST AS FOLLOWS-

1990 BULLY FRAME AND FORKS.
ARAYA 48's.
HARO MULTISURFACE TYES.
BULLY STEM.
DIACOMPE LEVERS.
SHARP LEVER COVERS.
GT FOUR PIECE BARS.
JIVE GRIPS AND DONUTS.
DIACOMPE BRAKE CABLES.
DIACOMPE BULLDOG BRAKES.
ACS Z PADS
ODYSSEY SEAT POST.
PEREGRINE BMX SEAT.
BULLY STEM.
ODYSSEY CHAIN WHEEL.
ODYESSEY TRIPLE TRAP PEDALS.
SUGINO ONE PEICE CRANK.
GREEN CHAIN BRAND YABAN.
GREEN SHARP BOTTOM BRACKET BOOT.
could have done with removing old brake rub marks from the rims, I will address this on a sunny 🌞 day.

Picklez · « **Reply #2 on:** March 03, 2021, 05:53 PM »

90's builds are usually a little too new to 'wet my tastebuds', but really liking that

.

brettypeeps · « **Reply #3 on:** March 03, 2021, 10:24 PM »

Great start to the Month

I nice looking ride

McQUEEN · « **Reply #4 on:** March 04, 2021, 06:45 AM »

Quote from: Picklez on March 03, 2021, 05:53 PM

90's builds are usually a little too new to 'wet my tastebuds', but really liking that .

@Picklez Me too, love the colours

nitrohopper · « **Reply #5 on:** March 08, 2021, 08:18 PM »

MY NEW RIDER {maybe}
1982 se racing floval flyer
here is my latest build I bought this of a lovey fellow on here who helped me out be keeping hold of this beauty for me until such time as I could afford it which was awesome of him I used to have my ghp but sold that last year to put down a deposit . I missed my black and gold quadangle which I sold a few years back to sort some things at home so the decision was made {as floval was not og paint }to go black and gold again so here it is

1982 floval flyer frame with un drilled landing gear forks
tange headset
redline brute stem
se cruiser bars
toadstool grips
dia compe tech 3 lever
dia compe cable
dia compe 1020 caliper
acs seat post clamp
troxal s e seat and post
ukai rims laced to shimano hubs
carlise aggressor tyres
izummi chain
capagnolo strada crankset
hti rat trap pedals
nos camo pad set

Superkip · « **Reply #6 on:** March 22, 2021, 09:42 AM »

So, after lurking on here for a good few years with the odd post and PM, I now finally have a build to show. This is my second Trickstar build, and this time I have got it almost exactly as I want it barring some very minor things which niggle me. I'm 99% certain all parts are era correct early-mid 80's barring inner tubes and valve kaps:

Almost all of the parts for this build were sourced through RAD FB and website members, the grips were the last piece of the jigsaw and I bought them early December last year from a BMXer in Fort Lauderdale, they slowly made their way to me with a little help from MrD

and were fitted last week:

Frame & Forks: 1984 USA Hutch Trickstar with Long peg forks (re-sprayed by SBD around 2012)
Bars: Hutch Mike Dominguez
Stem: Hutch Western H Freestyle
Flex Fighter: Hutch 2 in 1
Headset: Tange Alloy 125
Grips: Oakley B1B
Seat Post: Hutch Layback
Clamp: Polished Chrome Hutch
Seat: 1983 Kashimax + KSM Guts
Brakes: Tech 3 Levers and MX1000 dated all 1984
Cables: Dia Compe 1984
Chainwheel: Redline Bubble Font
Cranks: Redline 401 Flight 180 Full Wrap, Double Dimple Bottom Bracket
Chain: Chrome Izumi
Pedals: Hutch OG Beartrap + Race Cages
Wheels: Skyway Red Alloy Hub
Tyres: Panaracer 1984

Hope you like it

deeman · « **Reply #7 on:** March 22, 2021, 12:14 PM »

Ooooh, that Trick star is GORGEOUS! The grips are repro's, originals don't have the hole....which is why people often use crud plugs to hide the fact!!

Superkip · « **Reply #8 on:** March 22, 2021, 01:18 PM »

Quote from: deeman on March 22, 2021, 12:14 PM

Ooooh, that Trick star is GORGEOUS! The grips are repro's, originals don't have the hole....which is why people often use crud plugs to hide the fact!!

Thanks very much, that is appreciated

although I do disagree with the above having owned the re-issue B1B's which show 2010 around the end hole. These came NOS in the original 80's box, have a look through the museum reference pics for these and you will see the 80's grips did indeed have the hole.

Seeing your number of posts on here, i'd imagine your BMX knowledge in general is far superior to mine though so happy to be corrected if I am wrong, although actually I won't be happy as I spent a long time looking for these and paid a lot for them lol

hotdog · « **Reply #9 on:** March 22, 2021, 06:59 PM »

Quote from: Superkip on March 22, 2021, 01:18 PM

Quote from: deeman on March 22, 2021, 12:14 PM
Ooooh, that Trick star is GORGEOUS! The grips are repro's, originals don't have the hole....which is why people often use crud plugs to hide the fact!!

Thanks very much, that is appreciated although I do disagree with the above having owned the re-issue B1B's which show 2010 around the end hole. These came NOS in the original 80's box, have a look through the museum reference pics for these and you will see the 80's grips did indeed have the hole.

Seeing your number of posts on here, i'd imagine your BMX knowledge in general is far superior to mine though so happy to be corrected if I am wrong, although actually I won't be happy as I spent a long time looking for these and paid a lot for them lol

If it helps,all my OG '80's Oakleys have the hole. B2's,.5's,1's & 2's.

deeman · « **Reply #10 on:** March 22, 2021, 08:37 PM »

Quote from: hotdog on March 22, 2021, 06:59 PM

Quote from: Superkip on March 22, 2021, 01:18 PM
Quote from: deeman on March 22, 2021, 12:14 PM
Ooooh, that Trick star is GORGEOUS! The grips are repro's, originals don't have the hole....which is why people often use crud plugs to hide the fact!!

Thanks very much, that is appreciated although I do disagree with the above having owned the re-issue B1B's which show 2010 around the end hole. These came NOS in the original 80's box, have a look through the museum reference pics for these and you will see the 80's grips did indeed have the hole.

Seeing your number of posts on here, i'd imagine your BMX knowledge in general is far superior to mine though so happy to be corrected if I am wrong, although actually I won't be happy as I spent a long time looking for these and paid a lot for them lol
If it helps,all my OG '80's Oakleys have the hole. B2's,.5's,1's & 2's.

i could always be wrong!!! Although i was quite sure as i wouldn't of posted....i am sure someone else will be able to answer and i really wasn't trying to take anything away from the build...the candy red and blue Trick stars have always been my favourite! and yours is executed to perfection

brettypeeps · « **Reply #11 on:** March 22, 2021, 09:15 PM »

It is getting hot in here. Some awesome builds again

Picklez · « **Reply #12 on:** March 22, 2021, 09:35 PM »

Can we close posting now, then have three votes each

All different, and all worthy winners imho. Great month so far guys.

Ady · « **Reply #13 on:** March 23, 2021, 04:59 PM »

Stunning...
Just stunning...
One star has my vote

Quadog · « **Reply #14 on:** March 23, 2021, 08:35 PM »

Finally got this finished few more tweaks needed but thought id stick it in anyway

Frame & Forks: 1985 Haro sport
Bars: Haro FS
Stem: Tuff Neck
Headset: Haro reissue
Grips: AME
Seat Post: odyssey Layback
Clamp: ACS
Seat: Viscount Aero
Brakes: levers tech 6 128 callipers fs 880s
Chainwheel: Tuff neck
Cranks: Takagi 175
Chain: Chrome Izumi
Pedals: Shimano sx
Wheels: Skyway reissue
Tyres: Panaracer reissue

deeman · « **Reply #15 on:** March 24, 2021, 12:03 AM »

Quote from: Quadog on March 23, 2021, 08:35 PM

Finally got this finished few more tweaks needed but thought id stick it in anyway

Frame & Forks: 1985 Haro sport
Bars: Haro FS
Stem: Tuff Neck
Headset: Haro reissue
Grips: AME
Seat Post: odyssey Layback
Clamp: ACS
Seat: Viscount Aero
Brakes: levers tech 6 128 callipers fs 880s
Chainwheel: Tuff neck
Cranks: Takagi 175
Chain: Chrome Izumi
Pedals: Shimano sx
Wheels: Skyway reissue
Tyres: Panaracer reissue

Loving that Sport, i love the grey theme and use of non factory quality parts...

nitrohopper · « **Reply #16 on:** March 24, 2021, 08:53 PM »

1978 REDLINE MX2
just thought I would through this one in to the mix as well
this has been a slow burner taking about three years to build waiting on the right parts but I think it has been worth the wait .
1978 redline mx2 frameset
Ashtabula stem
Ashtabula nos bars
ogk mach grips
addicks seat post clamp
kashimax super seat
Ashtabula crank
tange bb
rat trap pedals
addicks chain ring and spider
motomags
nos cycle pro snake belly tyres
rad pads

hotdog · « **Reply #17 on:** March 24, 2021, 10:33 PM »

Clean

Picklez · « **Reply #18 on:** March 24, 2021, 11:48 PM »

What a great mix this month. Man, choosing will be difficult.

McQUEEN · « **Reply #19 on:** March 25, 2021, 06:26 AM »

Quote from: Picklez on March 24, 2021, 11:48 PM

What a great mix this month. Man, choosing will be difficult.

Spot on. Best month in ages. Funny though, I have a clear favourite and all my three votes already. Unless something drops in last minute!!

pat-a-lar · « **Reply #20 on:** March 25, 2021, 07:53 AM »

Some super nice builds this month. Nice to see.

I may be able to enter one this month if I'm allowed. It's had a few changes but may not be eligible.