Author Topic: Terry Jenkins Freestylin Cover bike (Read 9658 times)

tfi_friday · « **on:** July 03, 2019, 10:26 AM »

Hi,

figured I'd start a bit of a build thread for my attempt a building a replica of Terry Jenkins Haro Master from his Freestylin' Cover shot.

For whatever reason that Freestylin cover, a can-can look down (or what ever it's technically called), just seemed to be always stuck in my head.

Any photo I could find was not much help in trying to see the details on what was already a blurry photo.

So it begins...

In2bmx · « **Reply #1 on:** July 03, 2019, 10:42 AM »

tfi_friday · « **Reply #2 on:** July 03, 2019, 01:58 PM »

Part of the reason for doing this bike, I already had a Master frame and forks, and more importantly I have a couple of pairs of Space bars, so it was a good foundation for the build.

I also managed to get a Space Developments seat post from Damo (deeman) Wilkerson Sport build.

I chatted with Terry Jenkins about the bike and he still had a photo of the original bars from the bike which had some black details painted on to chrome Space bars.

First issue none of my Space bars were chrome... so stripped them down and sent them off to the chomers in May

Thank god for sunstrip!!

And a month later

Cherrypicker · « **Reply #3 on:** July 03, 2019, 05:47 PM »

Those came out lovely

tfi_friday · « **Reply #4 on:** July 03, 2019, 06:36 PM »

And a bit of paint later...

tfi_friday · « **Reply #5 on:** July 04, 2019, 11:36 PM »

Grips were low flange mushroom II which thankfully weren’t too hard to find

In the photo above it shows one detail that I’d previously missed... the third Tech 7 brake lever on the left side of the bars that he used for bar rides.

Time for some Tech 7 restoration...

tfi_friday · « **Reply #6 on:** July 04, 2019, 11:57 PM »

Had a set of white/silver Tech 7s but needed to refinish them in black.

So a strip down, mask off the locking pin, then ready for primer.

tfi_friday · « **Reply #7 on:** July 05, 2019, 12:04 AM »

Couple of interesting details on the bike, even though it’s a Team Master Frame, I thought it looked used he ran with Redline 401s and 36 hole Araya 7x.

Terry confirmed that this was the case. He always used 401s and 7x rims on that bike.

Pedals are Shimano DX (with reflectors) uggghhhh :-(

tfi_friday · « **Reply #8 on:** July 05, 2019, 12:07 AM »

So many small details that are obvious in the online images so I figured I need to buy the original magazine. Thankfully poorboysteev had one for sale so grabbed it and saw more details directly... blue brake blocks on the front and grip tape on the seat tube.

tfi_friday · « **Reply #9 on:** July 05, 2019, 12:19 AM »

Another detail was a red decal on the seat stay. Terry couldn’t recall what it was, either a Bob Haro decal or a Space decal... 87 didn’t have the Bob Haro decal (and the position would be wrong) so Del made me up smaller Space decals to place there.

deeman · « **Reply #10 on:** July 05, 2019, 03:39 AM »

Oh yes Alan, been waiting for this with anticipation!!! the bars look fantastic !! loving the details, especially the griptape on the seat tube. Can't wait to ssee the finished article and glad that seatpost went to good use, what better application than a TJ rep?

tfi_friday · « **Reply #11 on:** July 05, 2019, 08:49 AM »

Quote from: tfi_friday on July 05, 2019, 12:19 AM

Another detail was a red decal on the seat stay. Terry couldn’t recall what it was, either a Bob Haro decal or a Space decal... 87 didn’t have the Bob Haro decal (and the position would be wrong) so Del made me up smaller Space decals to place there.

Wonder if it could be a Holeshot decal... it was the Holeshot competition after all.

gary4130 · « **Reply #12 on:** July 05, 2019, 09:01 AM »

Nice attention to detail ,can't wait to see the full bike built

That Swan Guy · « **Reply #13 on:** July 05, 2019, 09:20 AM »

Only a fool would be this anal about a build!

tfi_friday · « **Reply #14 on:** July 06, 2019, 05:00 PM »

SBD has been busy today and I got a few teaser pics... it’s gonna be a long wait before I get a chance to see it for real when I collect it on the way to Cleethorpes.

tfi_friday · « **Reply #15 on:** July 09, 2019, 10:26 PM »

Probably the most painful thing I’ve had to go through (and I’ve had fooking cancer... twice) the reflectors are on the pedals.

Uggghhhhhhh

brettypeeps · « **Reply #16 on:** July 09, 2019, 10:50 PM »

Some great attention to detail

Cant wait to see it built

In2bmx · « **Reply #17 on:** July 10, 2019, 08:56 AM »

This is going to be special

griff · « **Reply #18 on:** July 10, 2019, 10:10 AM »

are you going to take the reflectors off as soon as you've done the pics?

& then take some more pics

tfi_friday · « **Reply #19 on:** July 10, 2019, 10:20 AM »

Quote from: griff on July 10, 2019, 10:10 AM

are you going to take the reflectors off as soon as you've done the pics?

And burn them out of existence!

oldschoolace · « **Reply #20 on:** July 10, 2019, 10:52 AM »

Proper build this! a shame we see so few of them these days.
Quite like those flekkies

....but then I don't like DX's

tfi_friday · « **Reply #21 on:** July 10, 2019, 11:36 PM »

Cranks sorted :-)

And this arrived today... NOS Suntour Coaster hub.

DazA · « **Reply #22 on:** July 11, 2019, 09:53 AM »

Am loving this....... Top work!
Loved the bars when you put them up in the 'just had delivered' section and was excited to see what they were going on...... You haven't disappointed, choice of project, attention to detail, your skills and sbd has done a cracking job with the colour.
From an era when i was probably most into my riding. Cant wait to see it finished. This might be my most favouritist rad build yet definitely got the BMX factor for me.

Keep up the top work

tfi_friday · « **Reply #23 on:** July 12, 2019, 01:56 AM »

Got the extra Tech 7 brake lever sorted today, minor stuff but I’ll be lacing the wheels after.

Swivel · « **Reply #24 on:** July 12, 2019, 09:22 AM »

Loving this thread!

Author Topic: Terry Jenkins Freestylin Cover bike (Read 9658 times)

In2bmx

In2bmx

griff