Author Topic: Buff Trick Star to go with RL’s Prostyler?? (Read 22017 times)

McQUEEN · « **Reply #25 on:** March 15, 2019, 08:55 PM »

Quote from: Cherrypicker on March 15, 2019, 08:44 PM

I know it’s Friday night and you’re all ooot on the lash, but nosstillwithreleasepowder Comp ll Stadium

there has to be a story behind how you got these???

deeman · « **Reply #26 on:** March 16, 2019, 01:46 AM »

Quote from: McQUEEN on March 15, 2019, 08:55 PM

Quote from: Cherrypicker on March 15, 2019, 08:44 PM
I know it’s Friday night and you’re all ooot on the lash, but nosstillwithreleasepowder Comp ll Stadium
there has to be a story behind how you got these???

Hahaha...i read in my half pissed and other intoxicants state ' while you lot are out on the lash i have been on the nostril release powder'
that's a new name for it I thought!!

I am still not sure about the 'release powder' myth...either way, You find some excellent parts Simon ...this is going to be just as cool as the RL , can't wait to see the finished article, your rider reps are next level

Cherrypicker · « **Reply #27 on:** March 16, 2019, 11:15 AM »

Yeah, me either, probably just been hanging in someone’s garage and got years of dust n shit on them $:-\$ there’s def sawdust in the treads.

kalex · « **Reply #28 on:** March 16, 2019, 05:50 PM »

A bit of light reading about other views on NOS tryes from a different bike forum

http://www.retrobike.co.uk/forum/viewtopic.php?f=1&t=392821

Cherrypicker · « **Reply #29 on:** March 17, 2019, 10:42 AM »

Interesting, thanks - I followed slightly diff method but seemed to have good results. I steam clean my tyres inside and out. Before that I clean the outside walls with Mr Sheen furniture polish. After the steam clean, I slather a good amount of vas on the inside of the tyre and pop it on a wheel and slightly over inflate it. You can see the vas coming through the tyre under pressure. Wash down the tyre, release some pressure and leave overnight. Repeat next day. Show pony only/ terms and conditions apply/ may cause back ache.

Cherrypicker · « **Reply #30 on:** March 22, 2019, 09:51 AM »

Del has waved his magic wand over my Zeronine plate. Result. Del’s wand is massive, so I’m told

Cherrypicker · « **Reply #31 on:** March 22, 2019, 06:46 PM »

Coaster tab removed and looks like it was never there. Off to polishing and chrome next.

deeman · « **Reply #32 on:** March 22, 2019, 10:57 PM »

Quote from: kalex on March 16, 2019, 05:50 PM

A bit of light reading about other views on NOS tryes from a different bike forum

http://www.retrobike.co.uk/forum/viewtopic.php?f=1&t=392821

Good info there Nick ...i knew it!!

Ady · « **Reply #33 on:** March 23, 2019, 06:29 AM »

Quote from: Cherrypicker on March 22, 2019, 06:46 PM

Coaster tab removed and looks like it was never there. Off to polishing and chrome next.

Your attention to detail mate is spot on

Cherrypicker · « **Reply #34 on:** April 12, 2019, 07:09 PM »

The frameset has gone to chrome today and I found some Judge forks for sale in Nova Scotia, which I had to wait for. I also got some nos Mike Buff Hutch Trick Team decals on the way, which I am well pleased about. Props to Ady for the lead on those.

Cherrypicker · « **Reply #35 on:** May 13, 2019, 01:07 PM »

Wheels are laced, thanks to Ady, top job and not easy lacing those beast spokes on the rear. They look amazing, especially with Dan’s paintwork on the Suntour coaster. And those lovely hen’s teeth tyres to finish them off. The f/f has yet to return from chrome - 5wks now, dread to think what they’re going to charge

Finding a red DC hinged clamp was a lot more difficult than I anticipated, but one on the way - as well as nice 83 red tech 3’s. Slow burner this one

Cherrypicker · « **Reply #36 on:** May 13, 2019, 01:13 PM »

Just a shot to show you those spokes. Mike had .80 gage on front and .105 gage on rear for strength. That’s roughly 14gage front and 12gage rear.

Ady · « **Reply #37 on:** May 13, 2019, 02:21 PM »

They were like metal rods ..
Perfect for z rims as ridged as my missus 🤣🤣

deeman · « **Reply #38 on:** May 13, 2019, 07:04 PM »

Quote from: Ady on May 13, 2019, 02:21 PM

They were like metal rods ..
Perfect for z rims as ridged as my missus 🤣🤣

They look awesome mate

Cherrypicker · « **Reply #39 on:** June 07, 2019, 02:57 PM »

Forks are back from the dead, I’m pleased with the result

As they are and as they were - worthy of resto.

Ady · « **Reply #40 on:** June 11, 2019, 09:09 PM »

They have come up a treat , nice and very bling

Must have been a nightmare getting these super rare forks..

Top work the chromers have done too..

Cherrypicker · « **Reply #41 on:** June 13, 2019, 03:21 PM »

Quote from: Ady on June 11, 2019, 09:09 PM

They have come up a treat , nice and very bling

Must have been a nightmare getting these super rare forks..

Top work the chromers have done too..

I was just lucky with the forks, went online at the right time, got talking to a guy in Nova Scotia, Canada - talking about what we’re building and he says he’s got some I can buy

Cherrypicker · « **Reply #42 on:** June 19, 2019, 01:44 PM »

Well after 6 months of searching every platform I could, I’ve finally found a Tioga Max Flo stem. I think it’s bang on the money.

Cherrypicker · « **Reply #43 on:** August 16, 2019, 05:47 PM »

Another og ingredient sourced. Chrome flaking right off, prime candidate for resto. It’s getting close now, nearly ready to build this bad boy.

factory pilot · « **Reply #44 on:** August 16, 2019, 05:59 PM »

Awesomeness

Cherrypicker · « **Reply #45 on:** August 28, 2019, 05:17 PM »

Last two decals for the plate arrived today so I’ve been putting that together. Update: 2hours later and my butt cheeks have yet to un-clench.
It’s not perfect, so I might have to bin it, but for now -

brettypeeps · « **Reply #46 on:** August 28, 2019, 09:18 PM »

Now this I am looking forward to seeing

Ady · « **Reply #47 on:** August 29, 2019, 02:22 PM »

Quote from: brettypeeps on August 28, 2019, 09:18 PM

Now this I am looking forward to seeing

Fook yea

Cherrypicker · « **Reply #48 on:** September 17, 2019, 06:13 PM »

Another slice of the pie. The lengths we go to to get these parts, honestly

It’s going to be covered up too! Elina Aero Turbo 81

Cherrypicker · « **Reply #49 on:** April 10, 2020, 03:41 PM »

Nearly done with this. I still have some fettling to do on the plate and the Buff guard, but for now it’s done. I’m gonna change the Mx 1000 for 900’s and when some og cranks show up, I’ll stick a fork in her and call her done done.