Author Topic: Silver Streak build thread Finished (Read 6545 times)

chrisv39 · « **on:** December 14, 2018, 07:36 PM »

When I first got interested in BMX an older lad who lived near us had a silver streak. I loved it and when we went to the bike shop before Christmas 1982 to pick our bikes I hinted to my dad how much I loved the silver streak, I knew it was out of my parents price range so choose a Pro Star, it shared the same advert in action bike so was the closest I could get. I hoped like you do when your a kid that he’d secretly got me the silver streak, but no I got the Pro Star which I loved, but the Silver Streak was always a bike I’ve wanted and recently I picked up this rusty old 83 complete with a set of bars.

I’ve already given the forks an oxy bath and have come up pretty good although they’re still pitted.
It won’t be built totally to spec but I’ve already got a few parts for it, OPC set up, Suntour XCII’s, SR seat clamp and Shimano tourney caliper and pre bent lever.

Sent from my iPad using Tapatalk

Retrodan72 · « **Reply #1 on:** December 14, 2018, 07:41 PM »

Yes, a build thread, I’m in.

Keep us posted on any updates Chris, I hope you have as much fun doing this as I did doing mine.

chrisv39 · « **Reply #2 on:** December 14, 2018, 07:57 PM »

Quote from: Retrodan72 on December 14, 2018, 07:41 PM

Yes, a build thread, I’m in.

Keep us posted on any updates Chris, I hope you have as much fun doing this as I did doing mine.

Yep I’ll keep updating as I go along with it Dan, hopefully I’ll be able to get parts off here for it, I’ve been through hell building the burners relying on the Burner Facebook pages it’s like a different world from RAD

Retrodan72 · « **Reply #3 on:** December 14, 2018, 08:05 PM »

Quote from: chrisv39 on December 14, 2018, 07:57 PM

Quote from: Retrodan72 on December 14, 2018, 07:41 PM
Yes, a build thread, I’m in.

Keep us posted on any updates Chris, I hope you have as much fun doing this as I did doing mine.
Yep I’ll keep updating as I go along with it Dan, hopefully I’ll be able to get parts off here for it, I’ve been through hell building the burners relying on the Burner Facebook pages it’s like a different world from RAD

I got parts for mine off some genuinely top Radsters, Del, Brunmie, Howser, to name a few.

Ady · « **Reply #4 on:** December 15, 2018, 06:17 PM »

Those forks came up a treat mate..
That citric stuff works wonders .
Love the original shop decal

chrisv39 · « **Reply #5 on:** December 16, 2018, 05:43 PM »

Quote from: Ady on December 15, 2018, 06:17 PM

Those forks came up a treat mate..
That citric stuff works wonders .
Love the original shop decal

The forks were worse than the frame other than inside the gusset so hopefully it’ll all come up like that. Luckily none of the chrome is flaking so it should come up ok. Like I said it’s still quite badly pitted but I can live with that.

P J Tunni · « **Reply #6 on:** December 18, 2018, 04:52 PM »

Always loved the chrome Diamondbacks b.i.t.d, would have been my dream bike if i could have afforded one! I finally purchased a viper last year and built it up (it's in the Old School section). Looking forward to seeing how this turns out. I found that DB parts are a lot more common on US eBay (seem to find more complete DB's for sale over here rather than parts).

chrisv39 · « **Reply #7 on:** December 27, 2018, 09:57 PM »

Quick update on the build. Got a bit of time to myself finally so put the bars in the oxalic and stuck the forks back in too for a bit more of a soak,and the gusset end of the frame.

Frames still in but I think it’s as good as it’s going to get with the bars and forks.

Also stripped down the XCII pedals gave them a good clean and regrease and stripped the cages ready for refinishing.

Sent from my iPad using Tapatalk

BMX1973 · « **Reply #8 on:** December 28, 2018, 05:37 PM »

That's going to be nice

Is it going to be an original spec or upgraded aftermarket parts ?

Retrodan72 · « **Reply #9 on:** December 28, 2018, 05:39 PM »

That chrome had come out really well Chris, great job done there.

chrisv39 · « **Reply #10 on:** December 28, 2018, 08:24 PM »

Quote from: BMX1973 on December 28, 2018, 05:37 PM

That's going to be nice

Is it going to be an original spec or upgraded aftermarket parts ?

I’d love to do it original but already have quite a few spare parts that will suit it and I’m too impatient to wait around for the correct parts to come up at the right price. I’ll probably get it built then slowly change parts to the original spec.

Quote from: Retrodan72 on December 28, 2018, 05:39 PM

That chrome had come out really well Chris, great job done there.

It has Dan considering the state it was in. It’s not great close up but looks good from a distance.

chrisv39 · « **Reply #11 on:** January 30, 2019, 09:06 PM »

After a lot of oxy baths and elbow grease I think the f&f are as good as they’re ever going to be. I’m pretty pleased with the result as I didn’t think it would come up this well.

I’ve put a new set of decals on from Del as a few were missing and the rest were faded and scratched.

Got a few more parts this week too.

Black fluted post off Carl in2bmx given the wet and dry treatment.

Repop Kashimax aero off wini with decals off Del.

And an SR 420 stem from France ready for a resto.

Sent from my iPad using Tapatalk

Retrodan72 · « **Reply #12 on:** January 30, 2019, 09:35 PM »

Looks mint Chris, great collection of parts you’re putting together for it too mate.

P J Tunni · « **Reply #13 on:** February 01, 2019, 12:19 PM »

Looking good, that f&f came up really nice! Liking the seat post, though i had to put a layback post on my Viper, damn those DB's are small!

griff · « **Reply #14 on:** February 01, 2019, 01:17 PM »

great thread

always love to see a bit of resto going on - that's coming up a treat

chrisv39 · « **Reply #15 on:** February 11, 2019, 05:50 PM »

Bit more done this weekend.

Not far off now still need a few parts, but will probably have to be put on hold for a bit while I save up some more BMX tokens.

Sent from my iPad using Tapatalk

Retrodan72 · « **Reply #16 on:** February 11, 2019, 08:09 PM »

Looking top notch Chris.

chrisv39 · « **Reply #17 on:** April 02, 2019, 01:14 PM »

Quick update on the build. A few more parts collected.
Shimano tourney brake set up.
NOS Fuans
Takagi 175 OPC with Sugino spider and bolts and no name 44t chainring which will do until I can find a Sugino.
Repop 7x rims and Suzue hubs. After a few people trying to hold me to ransom and fooking me about on Facebook for a black rear I’ve bought this NOS silver which I’ll refinish.
Few more bits and I can start building.

Sent from my iPad using Tapatalk

P J Tunni · « **Reply #18 on:** April 02, 2019, 04:15 PM »

Nice collection of parts, this is gonna look sweet! Love me a chrome and black Diamondback!

MrD · « **Reply #19 on:** April 04, 2019, 08:57 PM »

Light at the end of the tunnel on this build now

My 2nd bmx was a Silver streak so can't wait to see this one come together

MrD

Retrodan72 · « **Reply #20 on:** April 04, 2019, 09:05 PM »

Great choice of parts Chris, this will be a great build.

BMX1973 · « **Reply #21 on:** April 12, 2019, 05:06 PM »

Looks great.

Frame and Forks look lovely and shiny.

In2bmx · « **Reply #22 on:** April 12, 2019, 06:30 PM »

Coming along nicely

Looking forward to seeing this finished .

bobafett · « **Reply #23 on:** April 22, 2019, 09:48 PM »

Looking good

chrisv39 · « **Reply #24 on:** April 26, 2019, 08:28 PM »

Few small parts and jobs done over the last couple of weeks.

Rear hub’s now black with the correct axle fitted.

Got hold of a tired Tange bottom bracket which has come up quite well with a bit of work.

16t Shimano 333 freewheel.

And picked up this Sugino 44t ring of eBay ready for a resto.

I’d have usually started building when I got parts but I’m resisting temptation and waiting till I’ve got everything this time. Just need spokes, tyres, and a headset and I’m ready for action.

Sent from my iPhone using Tapatalk

Author Topic: Silver Streak build thread *Finished* (Read 6545 times)

griff

In2bmx

Author Topic: Silver Streak build thread Finished (Read 6545 times)