JUNE 2018 BOTM - Entry Thread

[griff]

OK Radsters, let's see what you have in store for June BOTM 

- Please post a full build spec for your entry.
- You may post a maximum of 4 pictures of your bike ( no tiled images - 4 individual pictures )
- You MUST still own the bike you enter.
- Your entry MUST be a new build and have not been entered before, or, it must be a major rebuild with significant changes.
- The build MUST be completed within the month of entry
- All entries must be in before the 1st of the following month or they will be removed.
- Any entrant found 'canvassing' for votes or other forums/social media sites will have their bike removed.

[Gra_goose]

Go on then John, I’ll start the proceedings...

Genuine factory made black 93 Hoffman Condor, and the only one known to still exist. Believed by some to be one of Mat’s old frames due to some dropout damage which it still has on it as seen in video clips of him riding a black 93, but who knows for sure. These were the rarest of the rare and all pre serial.

Anyway the spec is as follows:

1993 SE made Hoffman Condor frame.
1993 SE made Hoffman Condor forks.
1993 SE made Hoffman Patriot bars.
1993 SE made Hoffman Micky Post
Black and White ODI mushroom grips.
TNT fs stem.
Dia Compe Tech 77 levers.
Dia Compe Nippon front calliper.
Dia Compe AD990 rear brake.
White Dia Compe fs brake blocks, front and rear.
Odyssey gen 1 gyro.
Odyssey cables.
Odyssey Z77 Saddle.
YST headset.
Redline single pinch half wrap cranks.
Fusion chainring.
DX style pedals.
Peregrine Superpro wheels.
Cheng Shin freestyle tyres.
Dicta 16t freewheel.
Izumi chain.

Full thread can be found at http://www.radbmx.co.uk/forum/index.php/topic,193121.msg1937673/topicseen.html#new














Sent from my iPhone using Tapatalk

[torkerdude180]

1984 gt performer frame, forks, seat post and bars, sweatbeats inspired survivour build.
DC MX1000 front caliper
DCMX 900 rear caliper
pro neck stem
suntour seat clamp
suntour disc, rind and bolts
mx seat
tech 4 levers
duro freestyle tyres
pdx pedals.

[McQUEEN]

1984 gt performer frame, forks, seat post and bars, sweatbeats inspired survivour build.

I love a build with an original bike shop sticker....

[Mikku]

Great start to the month!!

[Grant_Stone]

1988 Skyway 300TA

My Grail... I have wanted one of these for ages and started collecting the odd part or two the past few years with this build in mind. Then a year or so ago I managed to buy the frameset. The Bullseye hubs on this bike were given to me by Ken Coster & Rein Stolz, they had been sat unused in the Skyway office for the last 37 years!

Frame & Forks - Skyway 300TA
Bars - Skyway Race Bars (Original 80's)
Grips - A'me Unitron
Stem - DK
Headset - Tange No.320
Lever - Dia-Compe Tech 5
Caliper - Dia-Compe AD990 (1988 but painted red)
Cable - Dia-Compe (Dated 1988)
Brake Pads - Dia-Compe
Seat - Skyway Viscount Dominator
Seat Post - Ishiwata Chromolly Straight Post
Seat Clamp - Dia-Compe MX Hinged
Cranks - Redline 401 Flight Crank (Single Pinch Full Wrap)
Bottom Bracket - Redline
Chainring - Redline Bubble Font 43t
Pedals - Suntour XC
Rims - Araya 20x1.75 7X Chrome
Hubs - Bullseye 1st Gen
Tyres - Tioga Comp 3 Rainbow Label
Chain - Izumi
Freewheel - Shimano MX30
Padset - Skyway Original
Number Plate - Haro Tech Series (Original)

[Faze 3]

Blimey, 3 stunners already

[pat-a-lar]

Okey Dokey, I’ve not entered a bike for a while so here you go......

1980 SE Racing Quadangle in original Chrome finish with Race Inc forks refinished in Bad Boy Brown. Frame decals are original, but not to the frame. The fork decals are Del specials.

Build spec is as follows -

SE Racing Powerwing Bars
Oury Grips
Fujita Seamless Saddle
Xcaliber Seat post clamp
Generic seat post
Pat Pending Tuf Neck stem in Gold
Shimano Tourney brake caliper with Shimano cable/blocks and Shimano DX Lever
Addicks Graphite 42t chainring and Addicks bolts
Takagi Spider
Takagi OPC crank
KKT Pedals
Araya 7C wheels
Suzue hubs
Carlisle Aggressor up front
CyclePro SnakeBelly at the rear
Izumi Chain

 

[CurtisEXP]

...now 4 stunners! 

[That Swan Guy]

1984 gt performer frame, forks, seat post and bars, sweatbeats inspired survivour build.

I love a build with an original bike shop sticker....

I have a bike shop sticker you can buy......it's still attached to the GT Pro Series it was put on in 1985

[chrisv39]

Stunning builds again this month. I’ll stick this one in, a brand i always used to see when I first got into BMX as a youngster.

October 1981 Mongoose f&f refinished in RAL 1018 zinc yellow paint.
Alloy hubbed Skyway Tuff II wheels
New CompII type tyres
Sugino Maxy Cross Crankset
Shimano DX pedals
YST Sealed Bottom Bracket
Shimano tourney brake with nos Shimano pre bent lever, nos Shimano directional brake blocks and nos Dia Compe cable.
Win Pro Bars
Suntour power stem
Suntour seat clamp
Stainless steel seat post with mongoose decal
New BMX Products mongoose mx seat
New BMX Products padset
Tange MX2 headset
New Ame rounds
Izumi chain











Sent from my iPad using Tapatalk

[Waxintaxin]

83 quad with landing gear
Aero arayas with suntour sealed
Comp 3s yellow green logo
Redline 401s
Hutch beartraps
Izumi chain
Kashimax MX seat
MX1000s [ Attachment: You are not allowed to view attachments ]

[dancetothedrummersbeat]

Some great builds again this month👍