gfxgfx
 
logo
 
gfx gfx
gfx
975798 Posts in 138943 Topics by 6362 Members - Latest Member: Bmxflex November 16, 2024, 04:14 PM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  enginerd types- a question headtube reducers 32.5/6/7 to 30.2mm
gfx
gfxgfx
 

Author Topic: enginerd types- a question headtube reducers 32.5/6/7 to 30.2mm  (Read 1135 times)

0 Members and 1 Guest are viewing this topic.

Offline steve

  • Curb Endo
  • **
  • Posts: 236
  • Rated:
[ Attachment: You are not allowed to view attachments ]

question to the enginerd types....
road bike headset press fit = 30.2

bmx headtube  = 32.7

2.5mm lacking

wall thickness of 1.25mm required
brass tube is - as per the ebay advert
1-1/4" ( 31.80mm) Wall Thickness 1.5mm

the plan, cut a 8mm ring - heat it up on the cooker - brass expands well?
squezze it onto the cup in vice, file it down to 32.7

yes/no
is there a better material than brass to use?

why don't you just get a headset that fits - I here you say
1. the frame I just bought came with a welded in road headset!! - WANt to do it
2. the headset pictured was £17 delivered
3. looks ace
4. different

« Last Edit: May 12, 2018, 09:46 PM by steve »

Offline oldschoolace

  • Team Moderator
  • Double Flip Whip
  • *
  • Posts: 6821
  • Bodger
  • Rated:
If the tube is 31.8 with a 1.5mm wall its internal diameter will be 28.8mm. Asking alot to get that over 30.2 with heat
Sixteen thirty-two. What is that? A year?   No, it's your top score on Pole Position.


Offline steve

  • Curb Endo
  • **
  • Posts: 236
  • Rated:
I think someone needs to make some because....

then you could run campagnolo 1'' headsets
hatta swan
tange Levin
stronglite

flap wheel inside the tube first?
- I get that it will be difficult, as its a interference fit to the cups and then into the headtube
but doable somehow...
« Last Edit: May 12, 2018, 10:19 PM by steve »

Offline oldschoolace

  • Team Moderator
  • Double Flip Whip
  • *
  • Posts: 6821
  • Bodger
  • Rated:
Just checked the expansion coefficient of brass and even at near melting temp it wouldnt expand to the dims you want.
Trip to a local engineers needed  ;)
Sixteen thirty-two. What is that? A year?   No, it's your top score on Pole Position.


Offline john4130

  • Look Back
  • *****
  • Posts: 1589
  • Rated:
i fitted a kuwahara headset to my trm that was too small. can't remember what size the cups were but i used a small sheet of 0.7mm aluminium. i cut it to around 98mm x98mm and rolled it. pushed it into the headtube and the cups where a nice tight fit. i also did the same years ago on my standard sta 1" 1/8 frame and fitted 1" gsport forks. i used that setup for around 4 years with no problems.

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  enginerd types- a question headtube reducers 32.5/6/7 to 30.2mm
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal