Author Topic: Converting wheels from 10mm to 14mm (Read 1785 times)

Michael bmx · « **on:** January 08, 2019, 10:22 PM »

Hi all, I have some wheels with 10mm axle, I want to make them 14mm, they have sealed bearings, is it just a case of inserting 14mm ID (inner diameter) bearings with a 14mm axle or is there more to it?
Also which bearings do you recommend for pure speed. Thank you, any help would be great

chubby · « **Reply #1 on:** January 08, 2019, 10:32 PM »

Be easier to use the thread on 10-14mm adapters mate. Had some on ages with no problem

Sent from my HTC One M9 using Tapatalk

chubby · « **Reply #2 on:** January 08, 2019, 10:36 PM »

https://www.ebay.co.uk/itm/Pair-of-Diamondback-BMX-Bike-Axle-Adaptors-Converts-3-8-to-14mm-/391941199174

Sent from my HTC One M9 using Tapatalk

Michael bmx · « **Reply #3 on:** January 09, 2019, 08:32 AM »

Thank you that's great, brought them

Midschoolfool · « **Reply #4 on:** January 09, 2019, 09:53 AM »

Those are very good if you are using pegs. They replace the lock nut, meaning all of the load goes onto the adapter and not your axle. They're more of a pain to fit, but well worth it in the end.