Author Topic: Craig Campbell Prolite (Read 13022 times)

benno · « **Reply #25 on:** February 02, 2018, 09:16 PM »

Decals on 😎😎

benno · « **Reply #26 on:** February 02, 2018, 09:17 PM »

Couple more 😎

ED209 · « **Reply #27 on:** February 02, 2018, 10:16 PM »

so minty

Retrodan72 · « **Reply #28 on:** February 02, 2018, 10:30 PM »

Looking fine so far Mikey.

deeman · « **Reply #29 on:** February 02, 2018, 11:48 PM »

Beautiful......

benno · « **Reply #30 on:** February 09, 2018, 05:13 PM »

So I’ve been having a play around with blue and white bits and different combos etc
Not really decided on all of it yet but it’s deffo getting white tuffs , white seat and white grips ,
Few pics below 👍🏼

benno · « **Reply #31 on:** February 09, 2018, 05:16 PM »

More combo pics
Give me your opinions fellas 👍🏼👍🏼

Retrodan72 · « **Reply #32 on:** February 09, 2018, 05:50 PM »

Ok, if it were mine and I was definitely going to use a white seat, grips and Tuffs, then I'd be inclined to go white with all parts, brakes, stem, clamp, tyres, pedals and chainring, only use blue on the powder and decals.

But that's just my opinion.

benno · « **Reply #33 on:** February 09, 2018, 06:34 PM »

My favourite at the mo is white stem and seatclamp , but blue brakes and chain ring
mainly because I’d like to use 880’s for a change and I happen to have a nos Anno blue set 😂

deeman · « **Reply #34 on:** February 09, 2018, 06:38 PM »

Looks way better with white parts imo

Picklez · « **Reply #35 on:** February 09, 2018, 11:52 PM »

ok, I'll be a bit controversial then

I'm liking the blue components on it. Either way though that's going to be one cracking build.

factory pilot · « **Reply #36 on:** February 10, 2018, 12:46 AM »

It’s going really well Mike... hats off .... white parts for me ... but it’ll look great with either I think bro’
“Outstanding work so far Radsters!”

brimfull · « **Reply #37 on:** February 10, 2018, 12:47 AM »

I think 880s, especially if they have a Potts on the front

In2bmx · « **Reply #38 on:** February 10, 2018, 08:26 AM »

Looking good Mikey

benno · « **Reply #39 on:** February 10, 2018, 05:38 PM »

Cheers lads , I’m still liking white bits but with blue calipers , I think when I start building it I’ll try the different bits out , once the wheels and tyres are on ,
It’ll be wearing these 👇🏼 by the way 👍🏼

Funkyworm · « **Reply #40 on:** February 11, 2018, 11:59 AM »

Looking good this mate, How many of these have you got now 3

benno · « **Reply #41 on:** February 11, 2018, 12:10 PM »

Quote from: Funkyworm on February 11, 2018, 11:59 AM

Looking good this mate, How many of these have you got now 3

No just this one mate , I had 2 last year both were poor condition had them both stripped and repaired and this one turned out to be the better frame so I kept this one and sold the other.

wilsey72 · « **Reply #42 on:** March 06, 2018, 09:51 AM »

My money is on "Blue Parts Benno" going with the blue parts after having a swapping session, white looks good but they ain't blue!!

In2bmx · « **Reply #43 on:** March 06, 2018, 12:16 PM »

Looking good Mikey .. Deffo Blue parts

Jase · « **Reply #44 on:** March 06, 2018, 01:50 PM »

Blue parts for me. Great build thread btw😎

benno · « **Reply #45 on:** March 06, 2018, 01:58 PM »

Cheers guys , ok then blue MX 1000’s or 880’s ??
I quite fancy the 880’s for a change 😀👍🏼

Jase · « **Reply #46 on:** March 06, 2018, 02:08 PM »

I’m just about to put some 880s on the current build I’m doing because I fancied a change. Just need to decide whether to go polished or white🤔

Quadog · « **Reply #47 on:** March 06, 2018, 02:26 PM »

I think you should ditch the blue 880s they’re rubbish

(Wanted blue 880s) 😳

benno · « **Reply #48 on:** March 06, 2018, 03:41 PM »

Quote from: Quadog on March 06, 2018, 02:26 PM

I think you should ditch the blue 880s they’re rubbish

(Wanted blue 880s) 😳

😂😂😂

benno · « **Reply #49 on:** March 25, 2018, 08:21 PM »

Time for a little update , I bought these lovely coaster tuffs from Brett last year, they were always bought with this build in mind .
As you can see they are in dire need of a good clean up and a good bit of sunbathing smothered in peroxide .
First step today was to strip all the axles and hubs out and give the wheels an initial clean, they had some round sticky marks at the base of each spoke which came off easy with a bit of acetone.
I then gave em a spray over with some degreaser and got a toothbrush to scrub in behind the hubs etc.
The next step will be to stanley blade round the rims to remove the brake rub and give em a proper scrub with some jif before running em through the dishwasher a couple of times . Hopefully that’ll get them good enough to peroxide as long as we get some sun that is 👍🏼
Here’s a few pics

Author Topic: Craig Campbell Prolite (Read 13022 times)

In2bmx

In2bmx