Author Topic: polish anodised parts (Read 1016 times)

ammacopij72 · « **on:** July 14, 2017, 09:35 AM »

Can I use Peek or Autosol? Don't want to risk damaging the finish...

Neil

chubby · « **Reply #1 on:** July 14, 2017, 09:41 AM »

Quick rub with peek should be OK, both are abrasive but peeks less so. Could try n find a liquid one to be safe.....

Sent from my HTC One M9 using Tapatalk

In2bmx · « **Reply #2 on:** July 14, 2017, 09:45 AM »

Peek is less abrasive

And better IMO

griff · « **Reply #3 on:** July 14, 2017, 10:01 AM »

Peek every time

We should try and get Peek to sponsor MK, I'm sure they have no idea of their contribution to BMX restoration

Come to think of it neither do the makers of Oven Pride probably - I keep forgetting that stuff is actually for cleaning ovens

chubby · « **Reply #4 on:** July 14, 2017, 05:16 PM »

Just thought, bit of T-cut would brighten em up Neil 👍👍

Sent from my HTC One M9 using Tapatalk

ammacopij72 · « **Reply #5 on:** July 16, 2017, 10:21 AM »

Cheers guys

BENDYCAT ELEVENTEEN · « **Reply #6 on:** August 10, 2017, 11:37 PM »

The trouble with Autosol is it's too grainy and can damage chrome that you only need to bring back to a high shine - autosol is more for old car pars that don't need a show shine polish up

PEEK and MOTHERS do a far better job as it's a smoother compound and used right will bring up chrome and such like to a higher shine/mirror look

Also using the right type of polishing cloth will help - the car polish rag with bigger holes is great as it allows the polish cream to move about and not dry to a hard spot that can be found using a tight weave cloth - this can cause it to scuff and line the chrome just when you don't need it

Cheers B