MARCH BOTM ENTRY THREAD

[In2bmx]

Let's see your March BOTM Entries ... 

- Please post a full build spec for your entry.
- You may post a maximum of 4 pictures of your bike.
- You MUST still own the bike you enter.
- Your entry MUST be a new build and have not been entered before, or, it must be a major rebuild with significant changes.
- The build MUST be completed within the month of entry
- Any entrant found 'canvassing' for votes or other forums/social media sites will have their bike removed.

[McQUEEN]

BOLT ON IS BETTER

GT PRO PERFORMER 1984

No build thread for this one, it was pretty much just get the frame and forks back from America via Chip at C4 and collect the parts - which has pretty much taken about 2 years. Parts list as follows:

F&F: GT Pro Performer 1984 USA Made - repaired and repowered by Chip at C4 labs with new decal set from Vert-ego
Bars: GT Pro Performer Freestyle bars NOS - with DelCals custom MoralesFiola shield
Stem: GT/ SR Mallet stem with original bolt (refinished by SBD in Maui Blue)
Grips: Ame UniTrons Blue / Yellow NOS
Headset: GT Epoch NOS
Brakes: Dia-Compe Tech 3's NOS (but anodised to blue from silver) with Dia-Compe MX1000's with centralisers and '85 cables
Brake Blocks: Kool Stop
Wheels: Tuffs (bleached till they started powdering so still a little yellow)
Tyres: GT GT GT GT GT GT....... 1.75 NOS
Crank: SR Cr-mo 165mm (rechromed by Capital Chroming)
Bottom Bracket: Tange-Seiki BB220-24
Disc: Tuf-Neck original satin finish
Chainwheel: Sugino 43T NOS
Chainwheel bolts: NOS GT
Chain: Izumi 1/8" in silver / black
Pedals: SR MP-470 NOS
Seat: Viscount MX NOS
Seat post: GT layback original chrome
Seat Clamp: SR NOS
Rear Standers: GT refinished by SBD in Maui Blue
Fork Standers: GT NOS in Maui Blue

Just need to clip the inner brake cables and tyrap the rear cable....

[pickle]

My March build 

[griff]

Oi 

[pickle]

Took you how many days? 

[Mikku]

A month of firsts for me! My first new school bike that'll be taking me back onto the track for the first time in 30-odd years! This is also a bit of a joint effort, in that I chose the components but Dan, our man in Hong Kong, did the bulk of the spannerwork! So here's my Crupi race bike:-









Spec List

•   Frame: 2011 Crupi Pro XL (6061 T6 aluminium)
•   Forks: 2012 Sinz Stealth Pro
•   Headset: Promax PI-1 sealed
•   Stem: Promax Impact
•   Handlebars: Box Maximus Pro (28.25” x 8”)
•   Grips: Turner
•   Brake lever: Sinz
•   Brake caliper: Sinz
•   Brake pads: Promax
•   Seatpost clamp: Crupi Rhythm quick release
•   Seatpost: Crupi alloy
•   Seat: Crupi Titanium-Lite
•   Cranks: Promax HF-2 (175mm)
•   Bottom bracket: Promax EX-1 sealed
•   Chainring: Renthal SR4 Ultralite (44T)
•   Pedals: VP 566
•   Chain: KMC Z
•   Chain tensioners: Promax C-1
•   Freewheel: Nervar (16T)
•   Wheelset: Generic alloy rims (20" x 1.75" x 36H) with flip-flop rear hub
•   Tyres: Maxxis DTH (20" x 1.75")
•   Tubes: Maxxis
•   Number Plate: Box Phase 1

Thanks Dan!

[Glynnyboy]

SKYWAY TA XL 1984
parts:
Skyway TA XL frame rechromed
Skyway TA forks NOS
Skyway Race bars
Skyway Graphite Tuff Wheels
Skyway Tuff pads
Skyway California lite padset
Hutch headlock
Hutch BB locknut
Suntour Sealed bearing BB
Shimano DX Pedals
Redline Flight crank
Redline 44t bubblefont chainring
Oakley b1b's
Dia compe mx1000 brakes
Dia compe tech 3 levers
Dia compe seat clamp
Kashimax aero seat
ESP Stem
Comp 4 tyres
Tange AW27 headset
For those that haven't seen the progress thread here's a link to it in tech & restoration
http://www.radbmx.co.uk/forum/index.php/topic,188563.0.html

[In2bmx]

  

[Andyboy77]

A great month already!    ...well, if we take that MTB out of the equation   

[pickle]

  by far THE best bike out of all of them  but in all honesty I thought it would've been taken down by now 😂

[Mikku]

I like it!!! & I think I spotted a BMX part or two on it! Well, BMX-esque at least!

[griff]

by far THE best bike out of all of them  but in all honesty I thought it would've been taken down by now 😂

Don't worry Roberto - it'll be gone come voting time 
Fooking oversized bouncy grown-up's bike!

[In2bmx]

by far THE best bike out of all of them  but in all honesty I thought it would've been taken down by now 😂

  I like it ... I might just leave it in     Be honest mate . Is it a cruiser or a MTB   

[Andyboy77]

by far THE best bike out of all of them  but in all honesty I thought it would've been taken down by now 😂

  I like it ... I might just leave it in     Be honest mate . Is it a cruiser or a MTB 

It's of course a cruiser Carl!  ...but yet a bouncy one. 

[pickle]

I was cruising like a bastard on it yesterday   

[nitrohopper]

1984 se quadrangle freestyle
Fred blood framset
Tange mx125 headset lock nut
Pro neck stem
Powerlite xt freestyle bars
DC tech three levers
DC cables
DC 880 calipers DC freestyle blocks
Skyway graphites
Comp ramps
Tuff neck seat post clamp
Kashimax MX seat
Takagi opc
PPP power disc
Sugino chain ring n bolts
Shimano DX pedals
Izummi chain
Se og frame pad
Cali light bar pad



Sent from my Wileyfox Swift using Tapatalk

[nitrohopper]

pictures are terible will redo them sorry

[Andyboy77]

pictures are terible will redo them sorry

But the bike is a beauty! 

[rooski]

Those bars are mental on the Quad fs 

[griff]

Surely there are a few more finished bikes out there?
Don't be shy peeps, get them in 

[brettypeeps]

Some great bikes already. That quad

[Avro]

At last a sunny day to photograph the bike!
Build thread if interested: http://www.radbmx.co.uk/forum/index.php/topic,188783.0.html

1982 Hot Heart Tange?

Frame: 1982 Tange Hot Heart
Fork: Tange TX1200 Champion
Headset: Tange MX2
Lock nut: Tange LP 440 Nos
Stem: SR MS 422 Blue top Nos
Handlebar: Unknown maker, alloy, very similar to Win
Grips: OGK Mach Nos
Brake levers: Shimano DX Nos
Cables: Shimano MX Nos
Calipers: Shimano Tourney Nos
Rear caliper guard: Accord BMX Nos
Seat post clamp: Tange SC1
Seat post: SR Laprade Nos
Saddle: Kashimax (repop, suede cover)
Bottom Bracket: Tange with Tioga CV170 axle Nos
Cranks: SR Nos
Pedals: SR MP460 Nos
Wheels: Ukai Speedlines, Shimano DX hubs
Tyres: Tioga Comp III (new)
Decals: Obviously Delcals, custom colours
Pad Set: Esemdesign, first set he has made and lovely.

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[mintypete]

My latest build, used and abused in skateparks around the Hertfordshire area with the one and only H-Bomb!

2007 Subrosa F&f
Salt cranks
Cheap eBay wheels
Demolishon Stem
Profile seat
Frima bars
Vans tyres (the most expensive part)

Rolls like a dream and built to be abused!

Pics taken at Rom & Harrow




Sent from my iPhone using Tapatalk

[SDF]

Anarchic 86 to 88 Street rider! Inspired by the Anarchic UK street riding scene. Respect to Nick Phillips, Dave Curry, David Slade, Craig Campbell, Jess Dyrenforth, Eric Steel and all the other riders involved.

The bike just needs a good bolting down now, as in the pics it is only lightly tightend together.
NEED SOME AZONE BARS!

87 Gt Perfomer frame and forks.
White Skyway alloy hubbed coaster wheels.
GT tyres.
MX901 brakes.
Orange and pink Tuff Pads.
Diacompe rear cables in pink.
GTfreestyle bars.
Odi Mushrooms.
Shimano DX pedals.
Flie donuts.
Tech five levers.
Sharp lever covers.
GT Mallett stem.
Dyno/GT flip down fork standers.
Kashimax seat .
GT seat post .
GT seat clamp.
SR crank arms.
Sugino chainwheel.
Tioga disc.
Tioga CRAZY COLOURS bolts.
CRAZY COLOUR chain Izumi...I think...
Sharp bottom bracket boot.
GT headset.
Disc wheel plates custom made by me and a cant lie, my Dad!
Stickers from EBay UK,USA ,AUSTRALIA , and custom made from Delcals.
Shimano Dx pedals

[pat-a-lar]

[ Attachment: You are not allowed to view attachments ] 1979 SE Racing P.K Ripper

Oury Grips
Transit Bars
SR stem
CyclePro Forks
CyclePro seat clamp
Super Elina seat
Takagi MX Drivetrain
Steel hubbed Tuff 2's
Cheng Tyres