Author Topic: Mancunian pickers (Read 116362 times)

CustardLips · « **Reply #100 on:** August 26, 2018, 12:07 PM »

What d'ya know about the Gorilla headlock Clint ?

oldschoolace · « **Reply #101 on:** August 26, 2018, 12:17 PM »

Bugger all Nick $:-\$
Had a quick look last night and its 1 1/8th so deffo mid school but there dont seem to be many about. Made by Ruland... whoever they are?

oldschoolace · « **Reply #102 on:** August 26, 2018, 12:19 PM »

Quote from: Taipan on August 26, 2018, 11:51 AM

What colour is the WHW headset fella?

Black. Did them in all the usual colours apparently including gold. Seem a half decent headset with a type of bear trap locking washer

CustardLips · « **Reply #103 on:** August 26, 2018, 02:19 PM »

Quote from: oldschoolace on August 26, 2018, 12:17 PM

Bugger all Nick $:-\$
Had a quick look last night and its 1 1/8th so deffo mid school but there dont seem to be many about. Made by Ruland... whoever they are?

I've got a 1" threaded one so I had a nosey around but couldn't find any info either.

Tidy bit of kit though.

oldschoolace · « **Reply #104 on:** August 28, 2018, 11:01 PM »

Some interesting find today! we unearthed a Nos Walens shaft drive bmx and a nos, fresh out of the box raleigh wild cat!!

chubby · « **Reply #105 on:** August 28, 2018, 11:02 PM »

They make it into the back of the beast??

Sent from my G8341 using Tapatalk

oldschoolace · « **Reply #106 on:** August 28, 2018, 11:05 PM »

Weirdly, we had just picked up an electronic Wild cat!
Found some GT peds, fishbone ufo full system and a tange unique x headset too

chubby · « **Reply #107 on:** August 28, 2018, 11:11 PM »

Quote from: oldschoolace on August 28, 2018, 11:05 PM

Weirdly, we had just picked up an electronic Wild cat!
Found some GT peds, fishbone ufo full system and a tange unique x headset too

No then

Had a productive day today, them peds 9/16th???

Sent from my G8341 using Tapatalk

oldschoolace · « **Reply #108 on:** August 28, 2018, 11:15 PM »

Half inch

oldschoolace · « **Reply #109 on:** August 28, 2018, 11:18 PM »

The walens was a tidy thing and worth what he was asking if you wanted one but we were thankfully distracted pulling skids on the the electric bikes the bloke had lying about for test rides

chubby · « **Reply #110 on:** August 28, 2018, 11:19 PM »

Quote from: oldschoolace on August 28, 2018, 11:15 PM

Half inch

Bugger...

Sent from my G8341 using Tapatalk

Retrodan72 · « **Reply #111 on:** August 29, 2018, 08:33 PM »

How the fook have I not been interested in this thread before? wtf:

Great stuff Clint/Dan.

Let me know if you come down my way.

chubby · « **Reply #112 on:** August 29, 2018, 08:43 PM »

Quote from: Retrodan72 on August 29, 2018, 08:33 PM

How the fook have I not been interested in this thread before? wtf:

Great stuff Clint/Dan.

Let me know if you come down my way.

Move along, no repop ere pal

Sent from my G8341 using Tapatalk

Retrodan72 · « **Reply #113 on:** August 29, 2018, 08:55 PM »

Quote from: chubby on August 29, 2018, 08:43 PM

Quote from: Retrodan72 on August 29, 2018, 08:33 PM
How the fook have I not been interested in this thread before? wtf:

Great stuff Clint/Dan.

Let me know if you come down my way.
Move along, no repop ere pal

Sent from my G8341 using Tapatalk

Obvs, I’ll be going for a pick around Alan’s stock room in 2048, hope he’s fitted a Stannah by then.

chubby · « **Reply #114 on:** August 29, 2018, 08:57 PM »

Quote from: Retrodan72 on August 29, 2018, 08:55 PM

Quote from: chubby on August 29, 2018, 08:43 PM
Quote from: Retrodan72 on August 29, 2018, 08:33 PM
How the fook have I not been interested in this thread before? wtf:

Great stuff Clint/Dan.

Let me know if you come down my way.
Move along, no repop ere pal

Sent from my G8341 using Tapatalk

Obvs, I’ll be going for a pick around Alan’s stock room in 2048, hope he’s fitted a Stannah by then.

Sent from my G8341 using Tapatalk

chubby · « **Reply #115 on:** August 29, 2018, 08:57 PM »

Quote from: Retrodan72 on August 29, 2018, 08:55 PM

Quote from: chubby on August 29, 2018, 08:43 PM
Quote from: Retrodan72 on August 29, 2018, 08:33 PM
How the fook have I not been interested in this thread before? wtf:

Great stuff Clint/Dan.

Let me know if you come down my way.
Move along, no repop ere pal

Sent from my G8341 using Tapatalk

Obvs, I’ll be going for a pick around Alan’s stock room in 2048, hope he’s fitted a Stannah by then.

Sent from my G8341 using Tapatalk

factory pilot · « **Reply #116 on:** August 29, 2018, 09:18 PM »

Great day being an honorary Mancunian Picker with Clint and Dan

I picked up these goodies ...

Sent from my iPhone using Tapatalk

Clean · « **Reply #117 on:** August 29, 2018, 09:28 PM »

I think a daytime series on Channel Five is imminent!

Great work, gents, and a fascinating read, from start to finish.

oldschoolace · « **Reply #118 on:** August 29, 2018, 09:47 PM »

A mixed day was shaping up to be a bit of a bust. Started to think our new cohort may be a jinx

One shop saved the day! The old boy left us rummage though everything he had and his wife was good enough to show us round a little museum of cycling they had mothballed. Super interesting day, some good laughs and good finds!

Honourary badge and T-shirt in the post Ant. Most welcome along any time mate

Still loving that light rider aerial

chubby · « **Reply #119 on:** August 29, 2018, 09:51 PM »

The amount of skyway repair kits out there is staggering

Sent from my G8341 using Tapatalk

Jaymz · « **Reply #120 on:** August 29, 2018, 10:17 PM »

Top work lads. Great finds

oldschoolace · « **Reply #121 on:** September 03, 2018, 10:19 PM »

With a belly fully of maccy dee's our intrepid duo set of again to more far flung fields. Again 1 bike shop saved the day with a raft of stuff. We left tons behind including nos 80's boxes of Vision streetwear high tops, SR BB's, at least 1000 various stickers inc Haro, Grab on and action bike magazine as well as akisu forks and a load more RL Osbourne garms, elbow pads, gloves more holdalls

oldschoolace · « **Reply #122 on:** September 03, 2018, 10:21 PM »

We also found a couple of these. Stem pads made from a folded and riveted section of bmx tyre. Guessing they are mid school?
Any ideas lads?

Wayne Croasdale connection with Nomura?

factory pilot · « **Reply #123 on:** September 03, 2018, 10:25 PM »

Can’t believe I missed this.... not fair .. back at work today! Hope to join you again in a couple of weeks guys!
Top picking

richiebozza · « **Reply #124 on:** September 03, 2018, 11:07 PM »

Quote from: oldschoolace on September 03, 2018, 10:19 PM

With a belly fully of maccy dee's our intrepid duo set of again to more far flung fields. Again 1 bike shop saved the day with a raft of stuff. We left tons behind including nos 80's boxes of Vision streetwear high tops, SR BB's, at least 1000 various stickers inc Haro, Grab on and action bike magazine as well as akisu forks and a load more RL Osbourne garms, elbow pads, gloves more holdalls

Oohhh I have been wanting original Vision high tops amd RL Hammer pads / gloves! What's the etiquette on this thread? Can you hook me up?!