Author Topic: 91 haro sport build (Read 5450 times)

Danny61379 · « **on:** November 27, 2016, 10:50 PM »

Ok so I got the frame and forks now the paintwork is not as good as I would have liked so am going to have to re paint/powder it, not decided the best plan of action yet. Have been told by numerous people on here that it's a bitch to match 100percent but as close as damnit will do. My hp 48s are going to the chromer tomorrow for a new shiny coating, and I need to get the decals off the bike to send to del, any tips on getting these off in one piece as they look like they are going to be a pain in the #*%. Pics of frame and forks below. Will keep progress of build updated regularly, any advice welcome guys hope you enjoy the build as much as I'm going to 👍 [ Attachment: You are not allowed to view attachments ]

CustardLips · « **Reply #1 on:** November 27, 2016, 11:01 PM »

Does Del not already have the decals on file ?

deeman · « **Reply #2 on:** November 28, 2016, 12:02 AM »

Quote from: CustardLips on November 27, 2016, 11:01 PM

Does Del not already have the decals on file ?

was thinking that myself Nick ....

Danny61379 · « **Reply #3 on:** November 28, 2016, 12:54 AM »

That's very possible my friend but I messaged him Friday and have not heard back yet so I will speak to him tomorrow and see

CustardLips · « **Reply #4 on:** November 28, 2016, 01:08 AM »

Think there's a coupla dud e-mail addresses for him... use this one an you'll be reet.

del@delcalsigns.co.uk

Danny61379 · « **Reply #5 on:** November 28, 2016, 08:29 PM »

Dropped frame off for painting today should be ready in a couple of weeks 👍

OllyHall · « **Reply #6 on:** November 29, 2016, 10:47 AM »

Noooooo!! That looks a sweet survivor dan what a shame! Only og once

thebigdog · « **Reply #7 on:** November 29, 2016, 12:02 PM »

Quote from: OllyHall on November 29, 2016, 10:47 AM

Noooooo!! That looks a sweet survivor dan what a shame! Only og once

I agree looked a nice survivor that.

Danny61379 · « **Reply #8 on:** December 05, 2016, 03:08 PM »

Got the frame back from paint today they done a cracking job matching the paint just waiting for forks and handlebars at sbd being powder coated now and for stickers to be done 👍

fischflo · « **Reply #9 on:** December 07, 2016, 05:52 PM »

...shame shame shame! .... oh well, full works it is then. So far so good, must admit, looks a match

Is that a Lego Technik Porsche GT or what ? thing looks mental

Danny61379 · « **Reply #10 on:** December 07, 2016, 06:32 PM »

Yeah it's a lego Porsche it's awesome it has working gears as well it's pretty sweet. As for the frame I had it done by a guy in Manchester at a place called Atlantic boulevard all the guy does is restoring (painting) old bike frames, if anyone is interested I will post his contact details up on here. His shop is full of mainly old road bikes from the 70s that he does for people.

fischflo · « **Reply #11 on:** December 07, 2016, 06:40 PM »

...awesome the colour, too

ED209 · « **Reply #12 on:** December 07, 2016, 11:22 PM »

should have left this as a survivor $:-\$

Danny61379 · « **Reply #13 on:** December 07, 2016, 11:40 PM »

Too late for that, it looked better in the picture as well.

Danny61379 · « **Reply #14 on:** January 03, 2017, 12:39 PM »

A few bits waiting to go on. Got the bars and forks back from SBD today awesome job they are absolutely mint.
Can't wait to start putting this together.
[ Attachment: You are not allowed to view attachments ]

CustardLips · « **Reply #15 on:** January 03, 2017, 12:53 PM »

How much did they charge for painting the frame Danny ?

Danny61379 · « **Reply #16 on:** January 03, 2017, 12:59 PM »

Atlantic boulevard charged me £200 mate. They done a great job in my humble opinion.

CustardLips · « **Reply #17 on:** January 03, 2017, 01:19 PM »

Quote from: Danny61379 on January 03, 2017, 12:59 PM

Atlantic boulevard charged me £200 mate. They done a great job in my humble opinion.

Wow

They're from Bury (just down the road from me) so thought I'd try em if they weren't too expensive but i think I'll stick with SBD. Cheers mate.

Danny61379 · « **Reply #18 on:** January 03, 2017, 04:50 PM »

Yeah I would have liked Dan to do my frame but he cannot match the paint in powder unfortunately

Danny61379 · « **Reply #19 on:** January 04, 2017, 07:52 PM »

Couldn't resist putting a few bits on today. Put the cups in for the headset and bottom bracket, the race for the headset was a complete bitch to fit tried for over an hour before giving in and taking the forks to a shop for them to do it, still took the guy 15 min even with the proper tools it was proper tight. I finally got a fusion disk yesterday that should be here tomorrow with a bit of luck. Put the ACS BOA front and real calipers on. That's all for now hope you like it even if it's not OG

[ Attachment: You are not allowed to view attachments ]

dancetothedrummersbeat · « **Reply #20 on:** January 05, 2017, 04:39 PM »

Looking good. Thanks for taking the time to put a build thread and photos up

Danny61379 · « **Reply #21 on:** January 11, 2017, 03:19 AM »

Quick update for anyone interested. I finally found a fusion disk which I'm super pleased about 🎉😀 also I have a NOS haro seat on the way and a NOS haro fusion stem on the way 👍 Awesome. Still waiting for stickers at the mo from del he got rid of his old ones on file but has been kind enough as to do them all over again for me, the guy is a legend. Other than that I'm now trying to find a 1inch odyssey gyro either NOS or proper mint but it seems to be quite a hard thing to find even used ones are not showing their faces 😢. Any help with this would be great (fingers crossed) will post some more pics next week.

Danny61379 · « **Reply #22 on:** January 11, 2017, 03:21 AM »

Oh and I have some new panaracer tyres coming from Japan which are going to look sweet on the super pros

Danny61379 · « **Reply #23 on:** January 14, 2017, 01:20 AM »

This came in the post today [ Attachment: You are not allowed to view attachments ] hell yeah. Well pleased with this little beauty.

oldtired · « **Reply #24 on:** January 14, 2017, 12:49 PM »

i may have a 1"oddy gyro , deffo got a pro 1 1/8, sure i had some 1" ones , i'll have a mooch round in the bits boxes