Author Topic: Is this headset set up too much? (Read 3720 times)

factory pilot · « **on:** October 30, 2016, 01:40 PM »

Okay so I'm doing an 84 freestyle type build..
I'm definitely fitting a flex fighter but..
What are your thoughts on having locknuts as well?
Anybody run both bitd?
Thanks Ant
( and no it's not a Haro build! Lol )

That Swan Guy · « **Reply #1 on:** October 30, 2016, 01:42 PM »

That's nasty!

factory pilot · « **Reply #2 on:** October 30, 2016, 01:45 PM »

Quote from: That Swan Guy on October 30, 2016, 01:42 PM

That's nasty!

Hell Yeah !

.. But you never know what people ran bitd Nick!
... And it's freestyle .. I'm guessing you're gonna hate my next build !

That Swan Guy · « **Reply #3 on:** October 30, 2016, 01:47 PM »

Quote from: factory pilot on October 30, 2016, 01:45 PM

Quote from: That Swan Guy on October 30, 2016, 01:42 PM
That's nasty!

Hell Yeah ! .. But you never know what people ran bitd Nick!
... And it's freestyle .. I'm guessing you're gonna hate my next build !

I do have the odd freestyler myself I'll have you know!

rooski · « **Reply #4 on:** October 30, 2016, 01:53 PM »

Fit a beartrap headset, no need for an additional locknut, job done.

factory pilot · « **Reply #5 on:** October 30, 2016, 02:02 PM »

Quote from: rooski on October 30, 2016, 01:53 PM

Fit a beartrap headset, no need for an additional locknut, job done.

You're much more practical than me Andy..

I just like adding extra bits on my builds ... But only if they look good and are era correct ...
I knew this would get people's opinions going!

Is there anybody who likes it? ...

rooski · « **Reply #6 on:** October 30, 2016, 02:08 PM »

Running a stem that high is dangerous, there's hardly any of the quill in the fork!

The quill of the stem helps to stiffen the fork as well, s&m made a longer wedge, to help strengthen the fork.

If you want a high rise use an ESP , the quill is about 1" longer than average.

Or just fit 10" rise GT bars.

Retrodan72 · « **Reply #7 on:** October 30, 2016, 02:13 PM »

I love Tange locknuts, got them on all my bikes, and every bike I've built, I also like Flex Fighters, but only the 1" ones, although I've never fitted one. I do think that, that set up that you've shown is a bit too much IMO.

factory pilot · « **Reply #8 on:** October 30, 2016, 02:16 PM »

Yeah it's got to be too much .. Agreed ... I was just trying to sneak a Tange locknut on there as well as like you Dan I love 'em!
Was just checking if it was era correct or if s few people actually ran them back in the day

factory pilot · « **Reply #9 on:** October 30, 2016, 02:18 PM »

So what about this set up ?
Hutch locknut/flex fighter combo!

bodamus · « **Reply #10 on:** October 30, 2016, 02:27 PM »

I think that's too much aswell just doesn't look right to me.

factory pilot · « **Reply #11 on:** October 30, 2016, 02:28 PM »

Quote from: bodamus on October 30, 2016, 02:27 PM

I think that's too much aswell just doesn't look right to me.

I think Mike Pardon ran one of these on his TAP with a Suntour power stem ...
I think it works ( ... A little better than the other setups .. Just )

rooski · « **Reply #12 on:** October 30, 2016, 02:31 PM »

A 2 in 1 would be ok, one of the lower rise ones, DK would be my choice

factory pilot · « **Reply #13 on:** October 30, 2016, 02:34 PM »

As I expected ( and thank god ! ) The headset lock is going and I'm just going to use the flex fighter.. It'll look way sweeter

Glynnyboy · « **Reply #14 on:** October 30, 2016, 04:12 PM »

When mounted on a 125 or even something like an aw27 the lp440 locknut looks sweet. If you put them on anything with a nut looking bit that's integrated on the top race they stand too proud and don't look right. The tange aw27 has atop race like this so the lock nut doesn't make it stand proud it looks like it's designed to go with it & looks sweet, you might even get away with the flex fighter looking a bit better with it.
To me your limited with headset choice if you want a lock nut on and it look right.

That Swan Guy · « **Reply #15 on:** October 30, 2016, 04:12 PM »

Glad to see you've sobered up

factory pilot · « **Reply #16 on:** October 30, 2016, 04:15 PM »

Quote from: That Swan Guy on October 30, 2016, 04:12 PM

Glad to see you've sobered up

I've got a hatta mx100 so I'm thinking flex fighter only ... Otherwise it's an unholy mess!

Retrodan72 · « **Reply #17 on:** October 30, 2016, 04:47 PM »

Quote from: factory pilot on October 30, 2016, 04:15 PM

Quote from: That Swan Guy on October 30, 2016, 04:12 PM
Glad to see you've sobered up

I've got a hatta mx100 so I'm thinking flex fighter only ... Otherwise it's an unholy mess!

Glynn's take on it is how I should have explained my post, all mine are AW27's, MX2's or Nikyo's, all of which will allow you to use the Tange as they have an independent retaining nut - I've got a bloody box full of them.

oldschoolace · « **Reply #18 on:** October 30, 2016, 06:15 PM »

Any good to you Ant? Lock nut and flex fighter in one

factory pilot · « **Reply #19 on:** October 30, 2016, 06:32 PM »

Quote from: oldschoolace on October 30, 2016, 06:15 PM

Any good to you Ant? Lock nut and flex fighter in one

I thought about the old jam butty Clint but you know I'm a sucker for Haro and I got a nos one pretty cheap!
Plus one of the bikes I'm using for inspiration had a Haro one on it and it looked good .. Granted without a lock nut!

oldschoolace · « **Reply #20 on:** October 30, 2016, 06:48 PM »

Why not get your haro flex fighter partially tapped out to form a 2 in 1

chubby · « **Reply #21 on:** October 30, 2016, 07:56 PM »

Flex fighters are the work of the devil & all should be binned

They have no place on any bike let alone a freestyler Ant !!!
Shit rotor that doesn't work or nowt

factory pilot · « **Reply #22 on:** October 30, 2016, 08:25 PM »

...oops people are really going to hate this next build of mine!

I like 'em so I'm going to put one on my bike ... Too hell with you all goddamnit!

Ps Clint I've got an engineer friend who could do this but I'll keep it OG me thinks .. Normal headset and flex fighter it will be

Retrodan72 · « **Reply #23 on:** October 30, 2016, 08:39 PM »

Quote from: factory pilot on October 30, 2016, 08:25 PM

...oops people are really going to hate this next build of mine!
I like 'em so I'm going to put one on my bike ... Too hell with you all goddamnit!

Ps Clint I've got an engineer friend who could do this but I'll keep it OG me thinks .. Normal headset and flex fighter it will be

We only hate your builds because they're soooo damn fooking good.

factory pilot · « **Reply #24 on:** October 30, 2016, 08:45 PM »

Quote from: Retrodan72 on October 30, 2016, 08:39 PM

Quote from: factory pilot on October 30, 2016, 08:25 PM
...oops people are really going to hate this next build of mine!
I like 'em so I'm going to put one on my bike ... Too hell with you all goddamnit!

Ps Clint I've got an engineer friend who could do this but I'll keep it OG me thinks .. Normal headset and flex fighter it will be

We only hate your builds because they're soooo damn fooking good.

cheers bro ... Part of the fun of a build for me is all the research and thinking things through ..