0 Members and 1 Guest are viewing this topic.
just sand off the filler, it should come off easy enough....then sand out any grinder marks. Do you have any pics?
You could fill with solder before painting...put some pics up and lets have a look at how bad it is
What is spenly? I can't edit it lolI'll post some pics up Spenly. Will take some now. When i type "S h o r t l y" i comes up as "Spenly" when posted lol
Is the bit in the middle body filler still or is that the state of the bare metal? I still reckon it will sand out. It will need some elbow grease but I reckon less than an hours work. start with 80 until you have removed the deep marks and then work upwards through the grades til you reach 600...this will more than enough for priming and painting
get some 80 grit and take it down to bare metal all over, I reckon those marks can be removed, or at least 90% of them
Probably got nicked 20 odd yrs ago so i wouldn't worry too much. The police won't be looking for it now... probably never were.