April BOTM *Voting NOW OPEN*

[In2bmx]

** VOTING NOW OPEN **

Let's see your BOTM builds please :-)

- Please post a full build spec for your entry.
- You may post a maximum of 4 pictures of your bike.
- You MUST still own the bike you enter.
- Your entry MUST be a new build and have not been entered before, or, it must be a major rebuild with significant changes.
- The build MUST be completed within the month of entry
- Any entrant found 'canvassing' for votes or other forums/social media sites will be removed from entry

** VOTING NOW OPEN **

[factory pilot]

I'll go first then ....


1984 Aero Pro Burner ( catalogue spec )

Tange F and F ( original chrome )
Aero Pro bars
Tange headset and lock nut
Tange grips
Suntour Power stem
Suntour seat clamp
Koizumi stamped seat post
Raleigh branded Kashimax Aero seat
Tange BB
Sugino stamped OPC
Sugino 44t chainring and spider
Sugino stamped chainguard and bolts
Dia Compe Tech 3s MX900s (stamped 84) cable clips and blocks
86 stamped DC cables ( that came on the bike as survivor )
Araya Aero rims
SR Custom M pedals
Team Raleigh Aero Plate and NOS Aero No.1
NOS Raleigh Decal on the bike stand
Izumi chain
Raleigh Aero Pro chain tensioners
Comp III Yellow Labels
Custom padset ( Steve Firebird )
F and F decals Del














For more details please see the build thread in the Race Bikes section of the forum.

Thanks, Ant

[McQUEEN]

My first time BOTM!


1988 RL20ii Kiwi

Redline RL20ii F & F (Frame refinished by SBD // Front Forks by Capital Chrome)
Redline Freestyle bars (refinished by SBD)
Am'e supersoft grips (NOS)
Tange Seiki headset (NOS / repop)
Redline 6 Bolt Forklifter with Rotor attachment (refinished by previous owner)
ACS Pro Rotor
86/87 Front fork pegs (reworked)
Redline / Peregrine seat clamp (NOS)
Redline stamped seat post (NOS)
Redline branded Viscount 2123 seat
Tioga BB-220SB Sealed Bottom Bracket
180mm Redline Flights refinished chrome
Redline 44t sprocket (NOS ~ repop)
KMC Z510 heavy duty nickel plated Silver chain
Dia Compe 182 Tech 7s (rebuilt after refinishing by SBD) Dia Compe Nippon 883 with recessed Allen key bolt (NOS) and rear FS990 and blocks
88 stamped DC cables (NOS)
Araya 48h 7x rims (NOS) Stainless Steel Spokes (NOS)
Suzue High Flange Sealed hubs front and rear (NOS) - built by LBS
Shimano MX30 freewheel
Whale Tail chain adjusters (NOS)
Generic pegs (NOS)
Shimano DX pedals (NOS) 
IRS Freestyle Pro tyres
F and F decals AJK Bikes
Freestyle decal Ultrahive
Rockville decal -  thinking I had these from Deeman?
Buffguard - McQueen, a stanley knife and an old race plate and two band aids.
Build thread here: http://www.radbmx.co.uk/forum/index.php/topic,186314.0.html

[benno]

Curtis Freestyler

F&F - Candy blue Curtis freestyler
Bars - Rickman freestyle
Wheels - Araya 7x shiney side
Cranks - Redline 401 single pinch full wrap ,Tuff Neck power disc , Sugino chain ring
Pedals - Suntour xc II
Tyres - Comp st
Stem - Pro neck
Brakes -DC  MX1000's , Tech3's , DC cables
Seat & post - Shotgun II , Rickman layback
Grips - Ame rounds bubble font

[john4130]

haro bashguard sport
bought the frame forks and bars of threaders and planned to strip and repaint it but decided to build it first to see how it looked, i had most of the parts, only needed a pitbull brake which i got from rooski, a couple of sets of odyssey pegs and a drill bit to make the seatclamp.
haro bashy sport f&f
kneesaver bars
unstamped dk stem (possibly a homeless)
schwinn xs powerdrive cranks
primo super tenderizer pedals
homemade peregrine decal for the cd chainwheel
fishbone seatclamp shaped and drilled like a fusion clamp with homemade decal
pitbull rear brake
8mm acs reaction boa front brake
tech 77 levers
fusion seatpost
odyssey seat
illegal tyres
drilled out a set of rims and sealed hubs to make some 95 spoked wheels, each wheel took about 5 hours work.

[Gish]

83 Robinson Pro ( Alan Woods old team race F&F)

Robinson Pro F&F ( Original Chrome & Decals)
GT Bars
Ame Tri Grips
Tuf Neck Pro Stem
Kashimax Seat
Tuf Neck Seatclamp
Dia Compe Tech III Lever
Dia Compe MX900 Caliper
Skyway Brake Pads
Sugino OPC (Dated 83)
Sugino 44T Chainring
Sugino Spider
Tuf Neck Chainring Bolts
Suntour XCII Pedals
Ukai 1.5 Rims
Chrome Suzue Sealed Hubs
Yellow Label Comp III's
Izumi Chain
Robinson Padset

[deeman]

I am going to throw this in for what it is worth...
!985 Haro Sport Ron Wilkerson rider rep....











FRAME N FORKS: 1985  Haro Sport repainted new decals
BARS: Haro SAE 4130 restored
WHEELS: Peregrine Master nos
TYRES: HAro Multisurface nos
SEAT: Viscount Dyna restored
SEATPOST: Space Developments rechromed
CLAMP: DC hinged nos
GRIPS: A'me Unitron restored
LEVERS: DC Tech V nos
CALIPERS: DC MX1000
CABLES: DC 85
PADS: Tuff freestyle/DC nos
STEM: DK pro  restored
HEADLOCK: DK restored
CRANK: Sugino opc black chrome
PEDALS: Shimano DX
CHAINRING: Haro uni directional nos
DISC: Anlun nos
CHAIN: Izumi


Build thread here....

http://www.radbmx.co.uk/forum/index.php/topic,185982.0.html

[Mikku]

Thankfully the sun come out this morning, so here's my '84 Free Agent Pro (survivor build):-









Spec

Free Agent frame (made in Dec 1984) with matching Free Agent forks (og paintwork + decals)
Free Agent pro bars
Tange beartrap headset (with new bearings)
DK “square top” stem
Winner Circle grips
’83 Dia-Compe MX890 brake caliper with matching ’83 DC Tech 3 brake lever
’83 Dia-Compe outer rear brake cable with new inner cable
Dia-Compe pads
DK seat post clamp
No-name layback seat post
Black aero seat (made in Italy)
Araya rims (20 x 1.75)
Suzue sealed hubs
Cheng Shin (20 x 1.75) tyres with Kenda tubes
Victor Beartrap pedals
Tioga 175mm opc (made by Sugino)
Tioga BB (with a mixture of old and new parts)
Tioga CDC-1 alloy chainwheel (44t)
Suntour freewheel (16t)
KMC Z chain
Shimano cable holders

Thanks for looking!

[Gish]

Anyone setting voting up 

[pickle]

+1! What's the cut-off date for entries this month as I'm waiting for a sunny weekend to take pics!

Cut off date and time is bang on the end of each month, get some pics done matey and get your ride in 

The Thread will be locked on Sunday morning .. 

 I usually set the voting up on my PC at work. It's 10x easier than my Mobile ... So unless another mod set's up the voting over the weekend . Because of the bank holiday  .. I'll set the voting up on Tuesday 3rd May.. 

Just a few posts above 

[Gish]

+1! What's the cut-off date for entries this month as I'm waiting for a sunny weekend to take pics!

Cut off date and time is bang on the end of each month, get some pics done matey and get your ride in 

The Thread will be locked on Sunday morning .. 

 I usually set the voting up on my PC at work. It's 10x easier than my Mobile ... So unless another mod set's up the voting over the weekend . Because of the bank holiday  .. I'll set the voting up on Tuesday 3rd May.. 

Just a few posts above 

Cheers Rob 

I didn't even see Carl's post I think I need to go to specsavers   

[pickle]

   No worries mate.........I'm sure it'll be setup soon 

[McQUEEN]

Might be best to rename this BOTM May?!

[ED209]

Might be best to rename this BOTM May?!

any more of that and yours won't even get put in 

 

[factory pilot]

Might be best to rename this BOTM May?!

any more of that and yours won't even get put in 

 

Has he got a bike in this month or summit? 
No patience the kids of today have they? 
It's all a bit  to be fair to the lad! 

[factory pilot]

Bloody hell its here ... Yeah! 
Now I've got to start thinking who to vote for .... Lovely builds this month .. It sure is a toughie

[ED209]

Yes voting all set up ... comments removed to group the bikes at the top 

Getting my votes in now 

[ED209]

John's bashy sport is my fav 

...and John I have a used and needing a bit of paint layback post for you if you want it ... no charge 

[CustardLips]

My votes are in... good luck fellas. 

[pickle]

Only voted for two, but well done lads 

[Gnarlyscoots]

My vote is in

It's good to see the 'free' votes back for some, but I try to keep it to one. I like the colour M 'agent' a, but something a little more organic has caught my eye this time around 

[john4130]

cheers ed, what size is the post? the bashy needs a 25.4mm. 

[ED209]

cheers ed, what size is the post? the bashy needs a 25.4mm. 

Yep that's what I've got ... It came off a sport ... needs paint tho

 

[In2bmx]

Votes in 

Anyone setting voting up 

Sorry  .

[dancetothedrummersbeat]

Voted