Author Topic: RON WILKERSON HARO SPORT....FINISHED!! (Read 45965 times)

deeman · « **Reply #50 on:** March 01, 2016, 02:22 PM »

Quote from: CustardLips on March 01, 2016, 01:15 PM

Quote from: deeman on March 01, 2016, 10:55 AM
FFS! The bars arrived this morning but they have been cut by just over 1/2" each side which will never do. Back to the drawing board.......

Get a bar extension kit Damo... I'll post a link later if you need one mate.

Thanks Nick, I hadn't thought of that but I will hang out for the right bars...not like they are super rare

CustardLips · « **Reply #51 on:** March 01, 2016, 02:49 PM »

No worries pal.

stevesredvxr · « **Reply #52 on:** March 01, 2016, 03:24 PM »

Ace thread Damo, will keep an eye on this.
👍

deeman · « **Reply #53 on:** March 01, 2016, 03:37 PM »

Quote from: stevesredvxr on March 01, 2016, 03:24 PM

Ace thread Damo, will keep an eye on this.
👍

Nice one Steve

dennyking · « **Reply #54 on:** March 01, 2016, 03:39 PM »

Looking forward to seeing it finished Damian. Going to be famtastic

deeman · « **Reply #55 on:** March 01, 2016, 03:40 PM »

Quote from: dennyking on March 01, 2016, 03:39 PM

Looking forward to seeing it finished Damian. Going to be famtastic

Nice one bro...good to see you here!

Jaan · « **Reply #56 on:** March 02, 2016, 05:15 PM »

This thread is what RAD is all about for me.

Coming to it late means I haven't had to wait for the next episode - I could binge in one hit.

Love you attention to detail and patience to get things right.

Kudos to you sir!

deeman · « **Reply #57 on:** March 02, 2016, 05:27 PM »

Quote from: Jaan on March 02, 2016, 05:15 PM

This thread is what RAD is all about for me.

Coming to it late means I haven't had to wait for the next episode - I could binge in one hit.

Love you attention to detail and patience to get things right.

Kudos to you sir!

Nice one Chris, glad you like

gary4130 · « **Reply #58 on:** March 02, 2016, 10:12 PM »

Quote from: CustardLips on March 01, 2016, 01:15 PM

Quote from: deeman on March 01, 2016, 10:55 AM
FFS! The bars arrived this morning but they have been cut by just over 1/2" each side which will never do. Back to the drawing board.......

Get a bar extension kit Damo... I'll post a link later if you need one mate.

hi mate can you send me a link for the kit?
cheers

BrianP · « **Reply #59 on:** March 03, 2016, 09:46 AM »

Quote from: deeman on March 01, 2016, 01:38 PM

Quote from: BrianP on March 01, 2016, 01:07 PM
This build is going to be sweet, love it all so far

Hey I know where there's a pair of those bars, Deeman, appear to be uncut and are stamped Anlun 4130 below the grip area - the right ones?

Brian

Good to hear from you Brian, glad you are enjoying the thread
They sound like the right bars to me, where can I find them?! I really need to sort a pair now!
Damo

PM Sent Damo!

Brian

deeman · « **Reply #60 on:** March 07, 2016, 06:09 PM »

Took the frame to SBD today....It's nice to leave something somewhere and know it couldn't be in better hands..

To old school bmx what Mecca is to da Jews!

McQUEEN · « **Reply #61 on:** March 08, 2016, 04:59 PM »

Quote from: deeman on March 07, 2016, 06:09 PM

To old school bmx what Mecca is to da Jews!

Sorry, Jews like Bingo?

deeman · « **Reply #62 on:** March 08, 2016, 07:26 PM »

Quote from: McQUEEN on March 08, 2016, 04:59 PM

Quote from: deeman on March 07, 2016, 06:09 PM

To old school bmx what Mecca is to da Jews!

Sorry, Jews like Bingo?

It's a reference from Ali g film

deeman · « **Reply #63 on:** March 09, 2016, 11:00 AM »

STOKED! I already had a generic layback post for this build which I was going to put a Space decal on but I actually managed to score a genuine Space post . A big thanks to dennyking for parting with it. In the pic is the generic post on the right and the Space post on the left. The Space post needs a rechrome so is going off to my mate asap. In the meantime I am going to chop the one I have to the same length as the Space one......

deeman · « **Reply #64 on:** March 16, 2016, 02:15 AM »

I got the seat finished after days and days of sanding and polishing on and off. I decided to buy some proper plastic polish for this task rather than the normal method of T cut which I use. Did it work? well...yes but after a fook load of work. Was it better than T cut? again a bit hard to tell as this type of plastic is hard to polish and they both need some elbow grease. the polish is made by Novus in case anyone is interested and comes in a 3 stage kit. A MASSIVE thanks goes out to Retrodan72 for sorting me out the guts for this

. The results....

McQUEEN · « **Reply #65 on:** March 16, 2016, 06:14 AM »

Quote from: deeman on March 16, 2016, 02:15 AM

I got the seat finished after days and days of sanding and polishing on and off. I decided to buy some proper plastic polish for this task rather than the normal method of T cut which I use. Did it work? well...yes but after a fook load of work. Was it better than T cut? again a bit hard to tell as this type of plastic is hard to polish and they both need some elbow grease. the polish is made by Novus in case anyone is interested and comes in a 3 stage kit. A MASSIVE thanks goes out to Retrodan72 for sorting me out the guts for this . The results....

Hard work pays off....

deeman · « **Reply #66 on:** March 19, 2016, 11:40 AM »

I was going to use some turquoise A'me Tri on this build but then found some Unitrons in the same colour which are ideal as these are what Ron was running on the bike....I just didn't like the grey/black ones he had on there.The ends needed tidying up a bit but came out great....