gfxgfx
 
logo
 
gfx gfx
gfx
975825 Posts in 138946 Topics by 6376 Members - Latest Member: The Carrot Cruncher December 29, 2024, 06:25 PM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Welcome!  |  Welcome  |  NEWBIE, Grifter convert... ADVICE NEEDED!
gfx
gfxgfx
 

Author Topic: NEWBIE, Grifter convert... ADVICE NEEDED!  (Read 6234 times)

0 Members and 3 Guests are viewing this topic.

Offline cockneyplayboy

  • Curb Endo
  • **
  • Posts: 21
  • Rated:
NEWBIE, Grifter convert... ADVICE NEEDED!
« on: December 17, 2015, 11:15 AM »
Hi all, getting into this bike stuff again, and after a couple of years enjoying my mint MK2 Grifter, I fancied an old School BMX.

Seen a few about, many copies and have used the search facility here to reserach as much as I can.  But is there any way of telling from a serial number on a frame how old the bike/frame is?

Been offered a Falcon Freestyler with the frame number CS10804994.  I initially figured it was a 90's bike as it has the rear loop at the stem of the seat mount section whereas 80's variants I have seen havent got this.

Any ideas?



Been offered money back if its not a genuine rather than a later knock off... but would rather check with those in the know!

Offline cockneyplayboy

  • Curb Endo
  • **
  • Posts: 21
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #1 on: December 17, 2015, 11:16 AM »
......Been told honestly that the non original bits are the stickers and the seat, I might add.....

Offline oldscool

  • Look Back
  • *****
  • Posts: 1272
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #2 on: December 17, 2015, 11:54 AM »
Welcome to rad no idea about Falcons but someone will help  :daumenhoch:
If in doubt flat out.

griff

  • Guest
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #3 on: December 17, 2015, 12:00 PM »
no idea what that is, but it definitely looks 90s to me and parts look fairly low spec.

not sure what the guy wants for it but if it's very cheap it might do you as a rider

Offline cockneyplayboy

  • Curb Endo
  • **
  • Posts: 21
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #4 on: December 17, 2015, 12:11 PM »
no idea what that is, but it definitely looks 90s to me and parts look fairly low spec.

not sure what the guy wants for it but if it's very cheap it might do you as a rider

Been offered it pretty cheap buddy, ..... but only really want a genuine 80's or mid 90's bike really.... hence trying to gauge the rough year...

Offline BMX1973

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 8415
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #5 on: December 17, 2015, 12:18 PM »
 :welcome to  :radbmxsmilie:  :daumenhoch:

I know nothing about Falcon BMX, guess it must be pre 95 as it has a 1" Headset.

Offline cockneyplayboy

  • Curb Endo
  • **
  • Posts: 21
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #6 on: December 17, 2015, 01:12 PM »
:welcome to  :radbmxsmilie:  :daumenhoch:

I know nothing about Falcon BMX, guess it must be pre 95 as it has a 1" Headset.

Thanks.... just wanna know what I might be getting of course! lol

Offline CustardLips

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 7314
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #7 on: December 17, 2015, 01:49 PM »
Not exactly sure what it is but i wouldn't touch it mate... looks like a cheap and nasty 90's pos to me.  ???
"Every year is getting shorter, never seem to find the time"

"WWG1WGA"

Offline That Swan Guy

  • Team Moderator
  • Double Flip Whip
  • *
  • Posts: 6549
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #8 on: December 17, 2015, 01:57 PM »
Urgh! "nono"

But  :welcome :LolLolLolLol:
Who wants to ride with Eddie Fiola?

Offline oldscool

  • Look Back
  • *****
  • Posts: 1272
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #9 on: December 17, 2015, 02:12 PM »
Why can everyone see this bike and not me. I just have an x in the corner like when a pic fails to upload. also custardlips your avatar is the same but every else on the site is fine. ???
If in doubt flat out.

Offline cockneyplayboy

  • Curb Endo
  • **
  • Posts: 21
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #10 on: December 17, 2015, 02:30 PM »
Hi all, getting into this bike stuff again, and after a couple of years enjoying my mint MK2 Grifter, I fancied an old School BMX.

Seen a few about, many copies and have used the search facility here to reserach as much as I can.  But is there any way of telling from a serial number on a frame how old the bike/frame is?

Been offered a Falcon Freestyler with the frame number CS10804994.  I initially figured it was a 90's bike as it has the rear loop at the stem of the seat mount section whereas 80's variants I have seen havent got this.

Any ideas?



Been offered money back if its not a genuine rather than a later knock off... but would rather check with those in the know!


Been offered a set of 80's Skyways (Black) with it too.

Offline That Swan Guy

  • Team Moderator
  • Double Flip Whip
  • *
  • Posts: 6549
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #11 on: December 17, 2015, 02:35 PM »
Hi all, getting into this bike stuff again, and after a couple of years enjoying my mint MK2 Grifter, I fancied an old School BMX.

Seen a few about, many copies and have used the search facility here to reserach as much as I can.  But is there any way of telling from a serial number on a frame how old the bike/frame is?

Been offered a Falcon Freestyler with the frame number CS10804994.  I initially figured it was a 90's bike as it has the rear loop at the stem of the seat mount section whereas 80's variants I have seen havent got this.

Any ideas?



Been offered money back if its not a genuine rather than a later knock off... but would rather check with those in the know!


Been offered a set of 80's Skyways (Black) with it too.

you can put lipstick on a pig but it's still a pig!

If you want a cheap looking, heavy, fugly bike go with it. If you hold your horses and do some research I'm pretty sure you'll find the bike of your dreams :daumenhoch:
Who wants to ride with Eddie Fiola?

Offline CustardLips

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 7314
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #12 on: December 17, 2015, 03:07 PM »
Why can everyone see this bike and not me. I just have an x in the corner like when a pic fails to upload. also custardlips your avatar is the same but every else on the site is fine. ???

That's cos my Manchester tart's not for sharing... get your fookin own.  :LolLolLolLol:
"Every year is getting shorter, never seem to find the time"

"WWG1WGA"

Offline Devilock

  • Berm Worm
  • ***********
  • Posts: 8094
  • ●|●|●
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #13 on: December 17, 2015, 03:14 PM »
As Nick has said, stay away. Be patient & peruse.


griff

  • Guest
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #14 on: December 17, 2015, 03:30 PM »
what they all said - tbh I was just trying to be nice before in case you'd bought the thing on an impulse before reading any replies

Offline Retrodan72

  • Site Supporter
  • BMX Overlord
  • *
  • Posts: 16347
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #15 on: December 17, 2015, 03:40 PM »
Why can everyone see this bike and not me. I just have an x in the corner like when a pic fails to upload. also custardlips your avatar is the same but every else on the site is fine. ???

You're lucky,  :D


GO FORWARD TO THE PAST, WITH NRP'S

Offline cockneyplayboy

  • Curb Endo
  • **
  • Posts: 21
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #16 on: December 17, 2015, 03:44 PM »
Lol thanks folks, no I havent bought it yet.

It seemed a cheap buy, and whilst I am not looking for a top notch best brand bike (I spend too much on my car collection to have much left over!!!) I just want a nice genuine 80's or very early 90's bike.... but as I say, a nice one not a crap-heap.  All input gratefully received and taken on board  :)

Offline cockneyplayboy

  • Curb Endo
  • **
  • Posts: 21
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #17 on: December 17, 2015, 03:46 PM »
..........incidentally its been for sale for a while but all of a sudden its gone!

Wonder if someone here has bought it  ;D ;D ;D ;D

Offline That Swan Guy

  • Team Moderator
  • Double Flip Whip
  • *
  • Posts: 6549
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #18 on: December 17, 2015, 03:50 PM »
Not unless they need a new radiator!
Who wants to ride with Eddie Fiola?

Offline Jaymz

  • Team RAD
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • I'm not FOOKING Dave
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #19 on: December 17, 2015, 03:58 PM »
I can tell you this. Its a mass produced frame from Taiwan that sold under multiple brands, anyone selling one always chooses to say its a falcon as its the name with the most old schol street cred, chances are it was actually a ninja street twister or something equally as gay.
and finally the seat you have is off a Lew-Ways Aero Stinger, no value to it unless you can find someone thats restoring one of the 3 known in the UK, even then its only worth a tenner

Offline Devilock

  • Berm Worm
  • ***********
  • Posts: 8094
  • ●|●|●
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #20 on: December 17, 2015, 04:17 PM »
I can tell you this. Its a mass produced frame from Taiwan that sold under multiple brands, anyone selling one always chooses to say its a falcon as its the name with the most old schol street cred, chances are it was actually a ninja street twister or something equally as gay.
and finally the seat you have is off a Lew-Ways Aero Stinger, no value to it unless you can find someone thats restoring one of the 3 known in the UK, even then its only worth a tenner

He hasn't fooking bought it

Offline CustardLips

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 7314
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #21 on: December 17, 2015, 04:20 PM »
Not unless they need a new radiator!

 :LolLolLolLol:
"Every year is getting shorter, never seem to find the time"

"WWG1WGA"

Offline cockneyplayboy

  • Curb Endo
  • **
  • Posts: 21
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #22 on: December 17, 2015, 04:25 PM »
I can tell you this. Its a mass produced frame from Taiwan that sold under multiple brands, anyone selling one always chooses to say its a falcon as its the name with the most old schol street cred, chances are it was actually a ninja street twister or something equally as gay.
and finally the seat you have is off a Lew-Ways Aero Stinger, no value to it unless you can find someone thats restoring one of the 3 known in the UK, even then its only worth a tenner

He hasn't fooking bought it

Correct, I havent.... but in the last few minutes SOMEONE has it seems!  ;)

Offline workshyfop

  • Curb Endo
  • **
  • Posts: 191
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #23 on: December 17, 2015, 04:41 PM »
theres always a gullible  :bellend: to buy these bags o shite isn't there?

Offline pickle

  • Site Supporter
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: NEWBIE, Grifter convert... ADVICE NEEDED!
« Reply #24 on: December 17, 2015, 04:51 PM »
 Thumbs down  does the seller have any MKII Burners?   ???

RADBMX.CO.UK  |  Welcome!  |  Welcome  |  NEWBIE, Grifter convert... ADVICE NEEDED!
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal