Author Topic: September BOTM VOTING thread (Read 13781 times)

pickle · « **on:** September 13, 2015, 04:40 PM »

Get your September builds in lads, 4 pictures max and you still have to own the bike

VOTE NOW OPEN

oldschoolace · « **Reply #1 on:** September 13, 2015, 05:14 PM »

I will get the ball rolling with the only race build i intend on doing

This is a progressive era survivor build with a few sympathetically restored parts

Super rare 1983 Vitus superleggera smooth flanged braised frame
Tange Trx forks
GT bars
Araya aero rims
wolber tyres
Fuji cranks (restored)
KKT lightning pedals (restored)
Brooks Vitesse 500 saddle
OGK Pentagon motorcycle grips
Motorcycle brake lever cover
Weinmann lever
DC mx 901 caliper
Aero MX II stem
Centre bore jam buttie seatclamp

Full KKt pedal resto here: http://www.radbmx.co.uk/forum/index.php/topic,180242.msg1810127.html#msg1810127

The nightmare that was removing the stuck seatpost, and solution here: http://www.radbmx.co.uk/forum/index.php/topic,179922.0.html

***Yes i know it has a front brake, thats how it arrived to me

***

Ady · « **Reply #2 on:** September 13, 2015, 08:20 PM »

1985 GT Pro world tour performer.

Dia comp MX 1000 front and rear both dated `84
Dia comp MX tech IV levers both dated '84
Skyway tuff II with Cheng shin white wall freestyle tyres
SR Chain wheel with tuf neck power disc
Gt Pro performer Bars
Gt stem
Nos AME grips..
Tange headset
Gt (later type) seat clamp..
Gt seat post
Dyna viscount seat

dilybum · « **Reply #3 on:** September 14, 2015, 09:50 AM »

My second go at BOTM!!
My only ever proper race bike build, so here goes!!

JMC AP#16!!
Andy Patterson Frame and Forks
Darrel Young Handlebars
Redline 180 400's
Hutch Beartraps
Tuffneck Stem
PPP Powerdisk
Original Padset to this bike!!
1.5 Knarler Knobbies
NOS Ukai Speedlines
MX 1000, Tech 3 , Dia Compe cable
Alloy HATTA Headset
Shotgun II
NOS Oakley B1b

everything date correct 1984!!

Hope you like it!! I frikkin loves it!!

Retrodan72 · « **Reply #4 on:** September 14, 2015, 10:18 AM »

I'll make the numbers up with this;

1985 Hutch Pro Racer
Repop Hutch Pro bars
Suntour power stem
Tange 300 headset
Jam buttie seat clamp
Generic seat post
Repop Hutch Kashimax Aero
Redline twin pinch 180 flight cranks with Hutch decals
Repop Hutch bear traps
Polished 7x style rims
Polished Suzue LF hubs with Hutch decals
Hand polished Asahi spokes
Repop Tioga Comp III tyres
Tange BB
Sugino 44t chainring
Rechromed Aerospeed power disc
Sugino bolts
KMC chain
Home-made padset with Del's decals
A'me grips
DC Tech 3 lever
Copy MX1000 caliper
DC brake blocks
Generic cable
Scotty B's valve caps
Repop Haro 1B plate with Del's Hutch decals

ED209 · « **Reply #5 on:** September 16, 2015, 09:19 AM »

1995 Zima

â€¢ UK made Zima frame & forks ... 'sliding post' model with built in seat clamp - stamped ZIMA SG P1 - designer & maker Steve Geall's first production model.
â€¢ Peregrine HP rims laced to Alex Leech's UK made PE Hubs
â€¢ UK made Milky Bars made by Geoff Cain
â€¢ UK made prototype Static stem
â€¢ Primo V Monster tyres
â€¢ GT Freestyle seat
â€¢ ACS Boa Rob Ridge Reaction modded UK Megabrake
â€¢ 4 x UK made Backyard Yardstix pegs
â€¢ Oddy gyro with GSport George's UK made GSport Ring Piece
â€¢ Jive grips
â€¢ Dia Compe Tech 77 levers
â€¢ Dia Compe AD990 rear
â€¢ Shimano DX pedals
â€¢ GT Profile cranks
â€¢ GT chainwheel
â€¢ ACS Claws freewheel

dinglem · « **Reply #6 on:** September 29, 2015, 11:57 AM »

Here's a late entry...

This is my ex-Team National Pro LONG in Candy Blue.
Frame: Serial number #883238 (August 1983-stamped) National Pro ‘LONG’ in candy blue. This frame was candy blue from the factory, and was purchased directly from ex-National Pro team rider Bill Stonebraker who has owned this factory ride from new.
Forks: Undrilled National Pro.
All details have been authenticated and confirmed in writing by Billy Stonebraker (present on the BMXMuseum; an exceptionally nice and friendly guy btw!) This is one of only 4 known genuine candy-blue finished National Pro frames, and is the only ‘Long’ example in this particular colour.
Bars: Rechromed and super-rare original unknurled 1st Gen (thin cross-bar) National Pro race bars. Repro Pro Neck decal placed in the same position as marked by the imprint of the original (Massive thanks to Norty40).
Wheels: NOS rib-sided Ambrosio 1 3/8 ‘skinnies. Radially laced front.
Hubs: Original blue and silver Crupi Gen I sealed bearing flip-flop hubs (taken off an ’81 Diamond Back Pro Mini).
Tyres: NOS Blue/skinwall 1 3/8” Tioga Comp III blue/green label.
Valve Caps: NOS white Jive Handles (slightly later 80’s(?) but how cool?!)
Chainring: Polished Pro Neck 44T chainring and powerdisk.
Chain: Silver Izumi.
Chain Tensioners: Polished ROE ‘Whale Tails’ (thanks ‘animal’).
Cranks: Profile Generation III ‘’A’’ in 177mm length; original chrome finish. Original decals.
BB: NOS Profile with Hop-Up kit.
Pedals: Hand-polished super-rare NOS Vector Ultimate PV-1 in plain unpainted factory raw finish (polished), with the original pair of unused end caps. Choice of 1/2inch and 9/16inch spindle sizes present.
Stem: OG and unmolested Blue Bulldog stamped Pro Neck.
Headset: Tange Seiki 300 with a NOS blue Tange locking nut and blue Haro flex-fighter.
Seat post: NOS National Pro layback seat post. Original Pro Neck decal.
Seat post clamp: Polished TUF NECK.
Seat: Original NOS March ’84 stamped blue Kashimax Aero.
Brakes: Hand-polished MX901.
Brakepads: Curved Scott Mathauser finned.
Lever: Polished left silver MX-121 Tech 3.
Brake Cable: NOS white mid-80’s dated Dia-Compe.
Padset: One of the best parts of the build… OG National Pro pad set sold to me by Bill Stonebraker – his original race set(!) Took me nearly 4 years after I bought the F&F from him to talk him into selling these.
Grips: Rare (only blue pair I’ve ever seen) survivor Akron BMX grips in blue/white. (Akron advertised their aftermarket items such as grips and seats in BMX Action from ’83 – ’84, so period correct).

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

[ Attachment: You are not allowed to view attachments ]

stidds · « **Reply #7 on:** October 01, 2015, 02:06 PM »

Thread unlocked and voting underway.

Remember guys, you have 3 votes each month now.

newlovetattoos · « **Reply #8 on:** October 01, 2015, 02:32 PM »

Votes in!

In2bmx · « **Reply #9 on:** October 01, 2015, 03:33 PM »

Votes in

denzil · « **Reply #10 on:** October 01, 2015, 03:57 PM »

Voted

dilybum · « **Reply #11 on:** October 01, 2015, 04:07 PM »

Vote's' in!!

CustardLips · « **Reply #12 on:** October 01, 2015, 05:03 PM »

Sorted.

Hurricane1 · « **Reply #13 on:** October 01, 2015, 05:12 PM »

Voted

Retrodan72 · « **Reply #14 on:** October 01, 2015, 05:32 PM »

In.

Nigelb · « **Reply #15 on:** October 01, 2015, 06:00 PM »

Voted.

factory pilot · « **Reply #16 on:** October 01, 2015, 06:26 PM »

Bloody hell... Just had another look... Really hard to choose this month as always ...
Hmmm... ?!???!!
Vote in .....

BMX1973 · « **Reply #17 on:** October 01, 2015, 08:12 PM »

kalex · « **Reply #18 on:** October 01, 2015, 09:17 PM »

Got my vote in

Picklez · « **Reply #19 on:** October 01, 2015, 09:22 PM »

voted

insectbones · « **Reply #20 on:** October 02, 2015, 06:11 AM »

Done

CurtisEXP · « **Reply #21 on:** October 03, 2015, 07:42 AM »

Voted - tough choice between my top two

Gish · « **Reply #22 on:** October 05, 2015, 06:47 PM »

Voted

danny4130 · « **Reply #23 on:** October 06, 2015, 08:20 AM »

Done.

Mikku · « **Reply #24 on:** October 07, 2015, 02:38 PM »

Done! A great selection of bikes as always but I would've voted for the Austin Seven Mini given half a chance!

Author Topic: September BOTM VOTING thread (Read 13781 times)

In2bmx