Dumb question but would would I need to complete this crank?

[Old School]

http://m.ebay.co.uk/itm/Sugino-Cromo-OPC-175-One-Piece-Crank-Raleigh-Burner-Old-School-BMX-/271979142025?nav=WATCHING_ACTIVE

Currently building my Silver Streak and need a little help on the nitty gritty names of these things please!
What will I need to complete the crank in the link above?

Pedals obviously!
Chainring obviously!
What else??

Cheers





Sent from my iPhone using Tapatalk

[deeman]

a bottom bracket set 24tpi 

like this......

http://www.ebay.co.uk/itm/Tange-24Tpi-Bmx-Bottom-Bracket-Nos-Burner-Old-Mid-School-/171904000179?hash=item280646e0b3

[Retrodan72]

You need a bottom bracket, I normally use a Tange, a 24 TPI (thread per inch).:

What I tend to do then, if I use a Sugino crank is use Sugino components, so a Sugino spider, 44t Sugino chainring, and I use unbranded chainring bolts, but you could use Sugino, if you're feeling flush. 

[CustardLips]

Still Tange but a couple of cheaper alternatives. 

http://pages.ebay.com/link/?nav=item.view&id=281795469756&alt=web

http://pages.ebay.com/link/?nav=item.view&id=271981437027&alt=web

[Old School]

Great thanks guys!
Have bought the Sugino bolts already!
And got my eye on the spider and 44T chainring too

Are there different Tange bottom bracket models?







Sent from my iPhone using Tapatalk

[CustardLips]

Are there different Tange bottom bracket models?

Sent from my iPhone using Tapatalk

Probably a few variarions but all basically the same. 

Or get yourself one of these better than the Tange bb's imo. 

http://pages.ebay.com/link/?nav=item.view&id=261376412414&alt=web

[Old School]

Are there different Tange bottom bracket models?

Sent from my iPhone using Tapatalk

Probably a few variarions but all basically the same. 

Or get yourself one of these better than the Tange bb's imo. 

http://pages.ebay.com/link/?nav=item.view&id=261376412414&alt=web

Thanks! That's 24T, does it matter what size "T" I go for?


Sent from my iPhone using Tapatalk

[CustardLips]

That means 24TPI (the thread size). The thread on the crank has to match the thread on the bb. 

If you're referring to number of teeth on the chainring you can have what you want... the preferred old school gear ratio being 44-16. 

[Old School]

Cool, all making sense!

And finally, I assume a Silver Streak bottom bracket only fits 24TPI?

: daumenhoch:


Sent from my iPhone using Tapatalk

[CustardLips]

Cool, all making sense!

And finally, I assume a Silver Streak bottom bracket only fits 24TPI?

: daumenhoch:


Sent from my iPhone using Tapatalk

No... a 28TPI bottom bracket will also fit but the sugino crank in the link is 24TPI. So you need a 24TPI bottom bracket. 

[Old School]

Well I believe that was the original crank, spider and chainring on the original SS so that's what I'm going for!
Cheers guys


Sent from my iPhone using Tapatalk

[Old School]

C
Sugino chainring purchased!


Sent from my iPad using Tapatalk