Profile crank removal

[CustardLips]

Anyone got or know where I can get a profile crank removal tool ?
Are they any good or has anyone got any tips for getting the fookers off. 

[Pooch]

Anyone got or know where I can get a profile crank removal tool ?
Are they any good or has anyone got any tips for getting the fookers off. 

loosen off the nut and tap the nut with a hammer.. Worked for me👍

[CustardLips]

Tried that mate but these bad boys ain't budging. 

[john4130]

take off the bolt on one side then tighten the bolt on the other side, that should get them moving. then do as Pooch suggested, or get the removal tool. just screw it in and smack it with a big hammer.

[CustardLips]

take off the bolt on one side then tighten the bolt on the other side, that should get them moving. then do as Pooch suggested, or get the removal tool. just screw it in and smack it with a big hammer.

Nice one john... I'll give it a go. 

[Dark Diggler]

You could pour boiling water over the crank arm a second or 2 before you give the bolt a whack too

[CustardLips]

You could pour boiling water over the crank arm a second or 2 before you give the bolt a whack too

Nice one Diggler... I'll give that a go too.   

[dancetothedrummersbeat]

If all else fails you can borrow mine Nick. I can post it to you

[CustardLips]

If all else fails you can borrow mine Nick. I can post it to you

Nice one Andy... I'll have another go. 
If i'm struggling I'll give you a shout. 

[Gary72]

take off the bolt on one side then tighten the bolt on the other side, that should get them moving. then do as Pooch suggested, or get the removal tool. just screw it in and smack it with a big hammer.

Before you do this take both bolts out and make sure they have been fitted evenly, You could be trying to tighten the bolt and it is already against the axle.

[john4130]

forgot to mention that. 

[insectbones]

Have you tried getting both sides off Nick?

I couldn't get the non drive side arm off, yet the drive side came off with a few whacks with a rubber mallet, then just tapped the spindle out with the non drive side crank still on it 

[NORTY40]

Have you tried getting both sides off Nick?

Steady on mate , give the guy a chance ........ he's only been trying to get them off for 3 weeks !!! 

[CustardLips]

I've not even tried yet tbh.... been too busy.



 

[NORTY40]

I've not even tried yet tbh.... been too busy.



 

Tell me those purple things are moving on that pic 

[insectbones]

If you're trying to take them off stoned....you have taken the fookin bolts out first eh 

[NORTY40]

If you're trying to take them off stoned....you have taken the fookin bolts out first eh 

He ain't even found the fookin spanner if that pics anything to go by !

[Pooch]

If you're trying to take them off stoned....you have taken the fookin bolts out first eh 

lol....

[CustardLips]

Can't get at all my stuff at the moment so everything's on the back burner for now. 

Now... where was I. 

[Dark Diggler]

Now... where was I. 

[NORTY40]

Now... where was I. 

 

[denzil]

 

[CustardLips]

My days of smoking super spliffs are long gone. 

I'll stick with these. 

[Jaan]

Show it your tadger, it'll fall off dead.

[Pooch]

Love a hot knife 😍😎