Author Topic: Time to start the Marlboro woody build (Read 20269 times)

bobbbbsy · « **Reply #50 on:** April 14, 2015, 11:39 PM »

RESULT

oldschoolace · « **Reply #51 on:** April 16, 2015, 10:07 PM »

Got quite a bit done today. Started off scribing the profile of the bars on some card as a template and cut some scrap ply to the shape. Just need to cut two wedges tomorrow to set the back sweep to the right angle in the jig.

Got the steam box finished too. Fitted the internal racking for the ash timber and a valve to connect the wallpaper steamer to

Big day tomorrow, first attempt at the bars awaits

chubby · « **Reply #52 on:** April 16, 2015, 10:16 PM »

You not gonna use them big gulp bars then Clint

oldschoolace · « **Reply #53 on:** April 16, 2015, 10:20 PM »

Nope, going on a new school build out of odd parts i have knocking around for my nephew

chubby · « **Reply #54 on:** April 16, 2015, 10:22 PM »

Quote from: oldschoolace on April 16, 2015, 10:20 PM

Nope, going on a new school build out of odd parts i have knocking around for my nephew

oldschoolace · « **Reply #55 on:** April 16, 2015, 10:30 PM »

Still available on the bay

chubby · « **Reply #56 on:** April 16, 2015, 10:34 PM »

Quote from: oldschoolace on April 16, 2015, 10:30 PM

Still available on the bay

Nowt to put em on

bobbbbsy · « **Reply #57 on:** April 16, 2015, 10:42 PM »

im gonna pretend i know what thats all about . looking good yeah

chubby · « **Reply #58 on:** April 16, 2015, 10:44 PM »

How long they gonna take to form then sausage

bobbbbsy · « **Reply #59 on:** April 16, 2015, 10:46 PM »

oldschoolace · « **Reply #60 on:** April 17, 2015, 05:43 PM »

The big steam event was a bit of a non starter. Fooking posh extension lead kept tripping out so will try again tomorrow with something a little older

Gave me time to tweek the jig though with a few additional formers and turn buttons

Rich, the theory is that most timbers take around an hour per inch thickness in the steamer then you get around a minute to do your thing before it starts to stiffen up again
ooohh errr missus

Bigfrawg · « **Reply #61 on:** April 17, 2015, 06:29 PM »

Whilst I appreciate that you have other things to do in your life like work and stuff , can you fookin crack on with this ?
I love a thread like this but have no patience and can't wait to see this done . Stop drip feeding us you bloody tease . Maybe if you stopped designing and making rad bike parts you could have this done in no time lol .
Again , great work mate

oldschoolace · « **Reply #62 on:** April 17, 2015, 06:47 PM »

sorry bud this ain't going to be a quick turnaround. If it's done before MK I will be well happy.

Bigfrawg · « **Reply #63 on:** April 17, 2015, 06:50 PM »

Here's hoping it will be done in time mate , would love to have good look at it up close .

chubby · « **Reply #64 on:** April 18, 2015, 04:16 PM »

Looks a ballache does that Clint

oldschoolace · « **Reply #65 on:** April 18, 2015, 05:17 PM »

Tell me about it. Todays efforts resulted in some intersting looking kindling

I suspect a combination of a tight radius and the ash being kiln dried rather than green (undried) has stumped me today.
I have 2 dowels left and may soak them for a few days to see if it helps. I suspect it wont

Thinking cap need a dusting off, would really like timber bars if possible

chubby · « **Reply #66 on:** April 18, 2015, 05:42 PM »

Knock some oak ones up

oldschoolace · « **Reply #67 on:** April 18, 2015, 06:20 PM »

Looking like laminated thin strips is the way forward

fookin hate laminating stuff

MartyC · « **Reply #68 on:** April 19, 2015, 09:12 AM »

Maybe time for some 4 piece bars i.e. Vector styled ones where you can mitre the joints, just a thought...

oldschoolace · « **Reply #69 on:** April 19, 2015, 10:48 AM »

I did think that and they would be easy enough to do but I'm going for an early look and 4 piece bars don't really convey that. Might make a set anyway

Bigfrawg · « **Reply #70 on:** April 19, 2015, 02:38 PM »

I'm sure you can do it mate , like you said maybe a good soak will do the trick or maybe some green wood . Keep it up dude , I'm looking forward to your next instalment

rodriguez · « **Reply #71 on:** April 19, 2015, 03:08 PM »

It will work with green ash I've done it but still takes a good bit of effort, I was trying to make an old fashioned catapult

IMHO as I'm not a carpenter I'd sack it off and go for laminate, would this also not have the advantage of being less susceptible to expansion and shrinkage, I've read that's a possible problem with the bamboo bikes.

chubby · « **Reply #72 on:** April 19, 2015, 07:01 PM »

Quote from: oldschoolace on April 19, 2015, 10:48 AM

I did think that and they would be easy enough to do but I'm going for an early look and 4 piece bars don't really convey that. Might make a set anyway

Freestyle ones

dp and chopper dude · « **Reply #73 on:** April 21, 2015, 09:19 AM »

If you're going to soak the wood prior to steaming. Would adding a wetting agent to the water help the water penetrate further into the wood and give you a bit more flexability?

oldschoolace · « **Reply #74 on:** April 21, 2015, 05:09 PM »

Im not sure soaking does a great deal to be honest. The problem is that i bought all the dowels for the frame kiln dried which sets the lignin in the wood (the stuff that makes it flex) It cant really be unset by water thought water can soften the wood itself a little.

Made a jig for the slight S shape in the chainstays. Hopefully the curves are gentle enough to bend the dowels but i suspect i may need green Ash for that too

Author Topic: Time to start the Marlboro woody build (Read 20269 times)

rodriguez