Author Topic: March BOTM VOTE OFF!!!! (Read 14702 times)

pickle · « **on:** March 10, 2015, 08:30 AM »

voiYou know the rules, max 4 pictures, you must own the bike, should've been built (completed) in the last month

dwain dibbly · « **Reply #1 on:** March 10, 2015, 09:03 PM »

OK i suppose someone needs to get this month started

this is my latest build

i just couldn't pass up such a low serial number so snapped it up as soon as i saw it.
I've been collecting the parts for the last year as i really wanted to do it justice.

http://www.radbmx.co.uk/forum/index.php/topic,180988.0.html

3-83 curved brake bridge serial number 0000032 skyway TA F+F
OG padset
single pinch redline flights
NOS first gen steel hubbed TUFFS
NOS skyway graphite pedals
NOS sugino chainring
NOS hutch powerdisc
NOS DC seat clamp
NOS MX1000
NOS tech III
NOS california lite lever covers
NOS Kashimax MX
GT seat post
Chrome tuff neck stem
Skyway Race bars
AME unitrons
Tange LP125

WINI · « **Reply #2 on:** March 11, 2015, 11:38 AM »

Beautiful TA

So, from mint to OG. May as well throw in my Dirt Bros TA. This is an original Dirt Bros complete (rather than a stickered up TA) from the States, and has come to me via a few guys on here. Totally original until I changed the front Peregrine for an OG 80's Tuff and the front caliper. Dan Harris changed the sprocket to an original Dirt Bros, and I had to bin the tyres as they were shot to sh1t. Other than those bits, it's as it was being ridden BITD.

83 TA XL frame
Haro forks
Peregrine rear, 80's tuff front
Elina LB seat
Shimano DX
Hoffman/Bully? bars
DC 880/901
GT stem and post
Dirt Bros chainwheel
Jive grips

Gnarlyscoots · « **Reply #3 on:** March 11, 2015, 10:18 PM »

Lets make this a TA affair guys

1983 Skyway TA frame and fork,
Tioga MX-2 headset with brass bearing cages,
Hutch 2 in 1 headlock,
DK (Dad and Kid) stem,
Hutch 2nd gen Pro bars,
A'me bubble font rounds,
DC Tech 3 lever, DC cable, DC MX1000,
Kool Stop pads and fins,
Suntour seat clamp,
Anlun seat post
Elina seat,
Skyway Graphite pedals,
Redline 401 flights, looseball BB, DD axle,
44T Redline bubble font ring,
Araya 7C rims, Sunshine High Flange looseball hubs,
Early slotted Izumi chain,
Blue/Green/Yellow Mitsuboshi Comp III's,
Skyway Cal-Lite complete padset,
Haro 1B plate.

zero9 · « **Reply #4 on:** March 15, 2015, 05:31 PM »

Some Cracking Bikes so far

May as well continue on the Skyway theme.

Here's my '83 TA Survivor build.

'83 Curved Brake bridge TA OG Decals
Deep H Hutch race stem
Dia Compe 901 Caliper (84 Cables)
Alloy hubbed Tuff II's
Comp III's
Diamond Back HLT Crank
Sugino 45T Ring
Shimano SX's
CW Pro Bars
SM Mushies
Epoch Mori Headset
Tuff Neck Clamp
Renthal Post
Viscount MX seat

Love TAs.

Smiler · « **Reply #5 on:** March 16, 2015, 08:17 PM »

Some super entries so far. Sorry not a TA but here is my first ever entry

1981 TORKER MX
Torker frame & forks
Epoch headset
Pro Neck stem
GT Pro bars
Redline 400 crank
Ukai Aeros, TNT hubs, Panaracer HP406
Dia Compe 880's, DC 128 levers, DC Blocks and new DC cables
Bullseye Elite pedals
GT seat clamp
1982 Elina Standard seat
A'me Tri grips
ACS Crossfire freewheels
Shadow half link chain

chubby · « **Reply #6 on:** March 22, 2015, 08:12 PM »

Best break this o/s skyway monotony with my 97 morales flatland

Parts list is
97 morales flat frame
kore (ish) forks
powerbite cranks
Profile chainwheel
kmc chain
sun bfr's & 2.1 v monsters
primo seat
ufo rotor
2hip juice bars & jives
Perry peds
ad 990's
jap stamped 77's
super rare kore pegs
comfy primo hemorrhoid seat
mtb seatpost
super cool bearing shaft clamp seat clamp
Mr tick stem (1 of 22 hand made by a mad pot smoking yank )
Superb engine turned decals by uncle Del
paint by Mr SBD of course

Gnarlyscoots · « **Reply #7 on:** March 23, 2015, 02:40 PM »

1984 Profile Prostyler frame and fork with custom decals,
NOS Tioga beartrap II headset with brass bearing cages,
NOS Tange headlock,
Re-issue Profile Lockjaw stem,
Powerlite XT freestyle bars,
NOS Oakley B2 grips,
DC Tech 3 levers, DC cables, DC MX1000's,
NOS Skyway Tuff pads,
NOS Anlun seat clamp,
Pro Neck seat post,
NOS Kashimax Aero,
ACS Stoker pedals,
Anlun cranks,
Suntour sealed BB,
NOS Tuf Neck chainring,
NOS chrome Ukai Speedline rims,
NOS Bullseye hubs,
KMC chain,
NOS 3rd gen Tioga ST Comp tyres.

20to26 · « **Reply #8 on:** March 23, 2015, 06:34 PM »

If you've been following this long winded build you'll have read that I happened to visit the bike shop on the day they closed down. Because of that I wanted to make this a little tribute build and built a custom Laserlite like it may have been assembled by a bunch of roadies for a lucky kid whose folks had a little more buying power than most in 1983.

1983 Kuwahara Laserlite KZ-3 oval tube Frame and Fork
Tange MX-125 headset
Hanabishi CR-MO three piece cranks with original BB
MKS BM-15 pedals
Suntour Silver Arrow seat clamp
Selle San Marco Concor Supercorsa saddle
WIN V-bars
WIN hinged stem
Suzue sealed bearing hubs
Asashi spokes
UKAI Speedline rims
Dia-Compe two finger lever
Dia-Compe DC 890 caliper
Tioga Comp III tyres
Ame Tri grips - cos I had them and wanted to finish this bike finally!

Read more in the build thread http://www.radbmx.co.uk/forum/index.php/topic,135328.msg1820601.html#new

bmxband1t77 · « **Reply #9 on:** March 30, 2015, 11:01 PM »

GT MACH ONE 1989

GT Mach One 1989 (Bigbadsam)
Tange ARX forks (Erdal Gngr)
Redline Flight Cranks (Rob Young)
HARO Vector bars 2014 (RadBMX shop)
Ukai 20x 1 1/8 rims unknown hubs
Schwalbe Durano tyres (Rupert The Bear)
Shimano 105 brake system
DC rear brake cable (Alans)
DC Tech 3 lever (Alans)
DC cable clamps (Alans)
DC MX Seatclamp (Alans)
Hammerhead seat seat post, possibly 4Jeri or Ruption (Custardlips) info from (OrgasmDonor)
Aero Jaguar saddle
Tioga Beartrap 2 headset
TT Jam Buttie Double Decker Antitweak flex fighter
Ame Round grips
Wellgo DX style pedals
Izumi goldie looking chain (Alans)
HelixBMX Dropout Savers

Rides like a dream. Smoother than you think despite 110psi in them tyres!

Thanks to Dinglem for the inspiration to go skinny.

Jonboy.

Sent from my iPhone using Tapatalk

skki3330 · « **Reply #10 on:** April 02, 2015, 10:58 PM »

Already made my decision blown away

pickle · « **Reply #11 on:** April 04, 2015, 10:19 PM »

No, it was submitted in April so missed the cut off point.

Will get the vote sorted tomorrow if I get time

griff · « **Reply #12 on:** April 05, 2015, 12:32 AM »

Quote from: tfi_friday on April 04, 2015, 10:22 PM

Quote from: pickle on April 04, 2015, 10:19 PM
No, it was submitted in April so missed the cut off point.

Will get the vote sorted tomorrow if I get time

No probs... I thought it was based on the built that month was the rule. But Yep it was added April 1st.

Get it in this month

nitrohopper · « **Reply #13 on:** April 05, 2015, 01:20 PM »

Where's alan balance bike gone

Dannywhac · « **Reply #14 on:** April 05, 2015, 05:26 PM »

Quote from: tfi_friday on April 05, 2015, 03:54 PM

It was removed because I posted on April 1st, rather than in March. I need to re-enter it April BOTM instead., but I won't.

Rules below - if you re-jig them for individuals then it's not really fair on other entrants.

Shame you won't enter it in next months as I thought it was a cool build, but that's your prerogative.

1. Maximum of 4 pictures, list parts if you feel like it or any history to the build
2. Bike should've been completed within a month of entry
3. Entry to BOTM will close at the end of every calender month
4. Voting will open as close to 1st of the next month as we can get and will run for 7 days
5. If we have joint winners then we will run a 3 day vote off for the outright winner
6. Each months winner will go into the BOTY vote off