Author Topic: Anyone Done An Oven Pride Strip On A Black Tange Headlock?? (Read 650 times)

Retrodan72 · « **on:** February 20, 2015, 10:21 PM »

And if so, were the results good?

And if so, any tips?

Funkyworm · « **Reply #1 on:** February 22, 2015, 08:43 PM »

Yes mate,

Are you talking about an LP-440 ?

If so mine Came out fine, little tip if you want to get the existing bare alloy bits really shiny. Stick them on a wheel with a little peek polish & they come up like glass.

Gary72 · « **Reply #2 on:** February 22, 2015, 09:18 PM »

Keep checking it and don't forget about it.
I ruined a set of crank arms because I forgot about them, Ended up getting SBD to powder them.
Dan told me about using caustic soda.

Retrodan72 · « **Reply #3 on:** February 22, 2015, 09:31 PM »

I'm ok ta guys, I swapped it for a red one with Lenny.

Cheers for replies though.

Funkyworm · « **Reply #4 on:** February 22, 2015, 09:33 PM »

Stick it in a plastic bag & use Oven Pride or Dr Magic Oven & Grill cleaner.. it's about £1 from cheap stores.. give it 5-10 mins & keep rubbing the bag to work off the anno. if you leave it a long time it'll turn black.. a Scotch brite pad or those harsh green scouting squares will take that off but try not ti let it go that far.

You'll be fine