Author Topic: Wheelsets and Spoke lengths (Read 4834 times)

NORTY40 · « **on:** March 06, 2015, 09:13 PM »

Nothing quite like a freshly built set of wheels , so i thought it would be a good idea to have a thread to show them off

I have a shed load of rims and hubs to build up so Im going to add the spoke length i used aswell . This is by no means mean't as a definitive guide to the spoke length but it is what has worked for me . I would always recommend you use Sean's spoke length calculator to confirm the length of spoke you require before you purchase spokes .

Spoke length calculator :
http://www.radbmx.co.uk/forum/index.php/topic,136816.0.html

Wheelbuild guide :
http://www.radbmx.co.uk/forum/index.php/topic,1344.0.html

I have a mate who will supply stainless steel DT Swiss spokes in any length if your struggling to find the correct length :
http://www.radbmx.co.uk/forum/index.php/topic,170045.0.html

RIMS : Pro Class 20 x 1.75
HUBS : Bullseye
SPOKES : Asahi chrome plated 186mm
LACING : 3 cross

RIMS : Ukai Speedline 20 x 1.75
HUBS : Suzue low flange loose ball
SPOKES : Asahi stainless steel 194mm
LACING 4 cross

RIMS : Araya 20 x 1 3/8
HUBS : Suzue sealed tech
SPOKES : Asahi chrome plated 218mm
LACING 4 cross

RIMS : ACS Z Rims
HUBS : Suzue small flange loose ball
SPOKES : Asahi stainless steel 194mm
LACING 4 cross

RIMS : Araya 7X Chrome plated 20 x 1.75
HUBS : Campagnolo Tipo
SPOKES : Asahi Stainless steel 184mm
LACING 3 cross

RIMS : Pro Class 20 x 1.75
HUBS : GT sealed bearing hollow axle
SPOKES : Asahi chrome plated 194mm
LACING : 4 cross

RIMS : Araya 7X 20 x 1.75
HUBS : Shimano large flange
SPOKES : Asahi stainless steel .Rear 184mm. Front 166mm
LACING : Rear 3 cross Front Radial

wildon · « **Reply #1 on:** March 06, 2015, 09:21 PM »

Great thread idea

griff · « **Reply #2 on:** March 06, 2015, 09:44 PM »

Great thread idea Joffytots

As a suggestion.... maybe for people too tight or lazy to buy a set of those calipers to properly measure the vital statistics of their hubs, might be a good idea to post them up if anyone's just measured some?