Author Topic: Thruster VP (Read 12983 times)

Jaypeg · « **Reply #25 on:** January 03, 2015, 01:18 PM »

Quote from: Mattdub on January 03, 2015, 12:41 PM

Cool , I've had a Jamie Burroughs replica since 2006 I'll finish one day

Where'd you unearth the pads ?.

Cheers bud, pads were made by grab on kid (Mike) , although I did
See some og ones on eBay this morning

Mattdub · « **Reply #26 on:** January 03, 2015, 05:39 PM »

Quote from: Jaypeg on January 03, 2015, 01:18 PM

Quote from: Mattdub on January 03, 2015, 12:41 PM
Cool , I've had a Jamie Burroughs replica since 2006 I'll finish one day

Where'd you unearth the pads ?.

Cheers bud, pads were made by grab on kid (Mike) , although I did
See some og ones on eBay this morning

Saw those on ebay, they look good.

Here's some I prepared earlier............

I've had those since about 2008.

Jaypeg · « **Reply #27 on:** January 03, 2015, 06:01 PM »

Nice...

Jaypeg · « **Reply #28 on:** January 10, 2015, 12:02 PM »

I haven't updated for a while, build has changed direction. Frame powdered by SBD, went back to white as the chromoly was
Non existsent. The plan was to go blue parts but I scored some red grab ons from Mike(appreciate they are not 70's) and then got a haro handle, red kashimax and shimano rear. Decals will be red , still a few parts to get but it's going to be a slow build.

Jaypeg · « **Reply #29 on:** January 28, 2015, 06:29 PM »

Evening , hope you are all cool ...I haven't updated in a while. I managed to score some thruster forks which need a bit of paint but really chuffed that I managed to score some . Race bars aren't quite wide enough but They will do for the mo.

oldscool · « **Reply #30 on:** January 28, 2015, 07:51 PM »

Very nice

Jaypeg · « **Reply #31 on:** February 03, 2015, 11:04 PM »

Not pro bars but getting there

Jaypeg · « **Reply #32 on:** February 28, 2015, 05:01 PM »

Started on the decals

Andy68 · « **Reply #33 on:** March 01, 2015, 05:37 PM »

Jaypeg · « **Reply #34 on:** March 09, 2015, 02:08 PM »

Haven't updated for a while ...

Bought a super maxy crank to find its French thread so got some lypotard pedals, may go for some ofmega at some point. Laced my araya 7c's to some suzue low flange, need tightening/ truing.

Blue plate is not staying and will get a red one me thinks. Was going to go red caliper but think it may be to much red so will go for raw. Forks need powdering , getting there...slowly

pickle · « **Reply #35 on:** March 11, 2015, 07:56 AM »

nice, i need a set of those pedals as well

Jaypeg · « **Reply #36 on:** March 15, 2015, 04:27 PM »

Nearly done

monkeymoped · « **Reply #37 on:** March 15, 2015, 04:42 PM »

that build is crazy good dude

Taipan · « **Reply #38 on:** March 16, 2015, 12:56 PM »

Looking good mate

Jaypeg · « **Reply #39 on:** March 16, 2015, 01:38 PM »

Cheers guys

CustardLips · « **Reply #40 on:** March 16, 2015, 01:51 PM »

Nice... proper old school look about it.

MartyC · « **Reply #41 on:** March 30, 2015, 12:43 PM »

Looks cracking

Always loved the rear chain/seat stays and dropouts on these. Forks are pretty cool too.

Jaypeg · « **Reply #42 on:** March 30, 2015, 02:35 PM »

Quote from: MartyC on March 30, 2015, 12:43 PM

Looks cracking

Always loved the rear chain/seat stays and dropouts on these. Forks are pretty cool too.

Cheers bud, need to get the forks powdered. Swapped the seat post for a black one ...

Jaypeg · « **Reply #43 on:** April 21, 2015, 05:13 PM »

Well I've swapped calipers from another bike so that I can use this mx1000(shout to del for the decal). Bought some shimano clips from spen(cheers dude) and the forks have been sent to SBD.
Wheels need truing but it's almost done...no rush though

Mikku · « **Reply #44 on:** April 22, 2015, 07:04 AM »

Great thread! I love these frames and it's interesting to see how the build has changed direction and evolved with the arrival of new parts and/or ideas. Looking forward to seeing it finished!

Jaypeg · « **Reply #45 on:** April 22, 2015, 07:26 AM »

Quote from: Mikku on April 22, 2015, 07:04 AM

Great thread! I love these frames and it's interesting to see how the build has changed direction and evolved with the arrival of new parts and/or ideas. Looking forward to seeing it finished!

Cheers Mikku,I'm happy with how it's progressed and looking forward to seeing it complete.